使用WCF的Trace与Message Log功能

时间：2022-06-20 17:11:47

原创地址：http://www.cnblogs.com/jfzhu/p/4030008.html

转载请注明出处

前面介绍过如何创建一个WCF Service http://www.cnblogs.com/jfzhu/p/4025448.html，本文介绍一下如何开启与查看WCF的Message Log和Trace Log。

（一）使用WCF Service Configuration Editor开启Trace与Message Log功能

如果安装了Visual Studio，我们可以使用WCF Service Configuration Editor来开启WCF的Trace和Message Log的功能。Trace和Log既可以在客户端做，也可以在服务器端做。

有两种方式可以打开WCF Service Configuration Editor

（1）Visual Studio Tools –> WCF Service Configuration Editor:

使用WCF的Trace与Message Log功能

（2）直接在Solution Explorer中右键点击app.config –> Edit WCF Configuration:

使用WCF的Trace与Message Log功能

打开WCF Service Configuration Editor后，我们需要点击

  • Enable Log Auto-Flush
  • Enable MessageLogging
  • Enable Tracing

使用WCF的Trace与Message Log功能

使用WCF的Trace与Message Log功能

还要将LogEntireMessage改为True:

使用WCF的Trace与Message Log功能

保存配置文件，可以看到文件夹中多了两个文件，一个是message log文件，另一个是trace log文件：

使用WCF的Trace与Message Log功能

（二）调用WCF Service

演示的解决方案如下：

使用WCF的Trace与Message Log功能

Employee.cs：

namespace HelloService

{

    [DataContract(Namespace="http://jfzhu.com/2014/10/16/Employee")]

    public class Employee

    {

        private int id;

        private string name;

        private DateTime birthdate;

        [DataMember(Name="Id", Order=)]

        public int Id

        {

            get { return id; }

            set { id = value; }

        }

        [DataMember(Order = )]

        public string Name

        {

            get { return name; }

            set { name = value; }

        }

        [DataMember(Order = )]

        public DateTime Birthdate

        {

            get { return birthdate; }

            set { birthdate = value; }

        }

    }

}

IHelloService.cs

namespace HelloService

{

    [ServiceContract(Name = "IHelloService")]

    public interface IHelloService

    {

        [OperationContract(Name="GetMessage")]

        string GetMessage(string name);

        [OperationContract]

        Employee GetEmployee(int id);

    }

}

HelloService.cs

namespace HelloService

{

    public class HelloService : IHelloService

    {

        public string GetMessage(string name)

        {

            return "Hello " + name;

        }

        public Employee GetEmployee(int id)

        {

            return new Employee() { Id = id, Name="Neil Klugman", Birthdate=new DateTime(, , )};

        }

    }

}

Host的web.config

<?xml version="1.0" encoding="utf-8"?>

<configuration>

  <system.serviceModel>

    <diagnostics>

      <messageLogging logEntireMessage="true" logMalformedMessages="true"

        logMessagesAtTransportLevel="true" />

    </diagnostics>

    <services>

      <service name="HelloService.HelloService" behaviorConfiguration="metaBehavior">

        <endpoint address="HelloService" binding="basicHttpBinding" contract="HelloService.IHelloService"></endpoint>

        <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange"></endpoint>

        <host>

          <baseAddresses>

            <add baseAddress="http://localhost:8080"/>

          </baseAddresses>

        </host>

      </service>

    </services>

    <behaviors>

      <serviceBehaviors>

        <behavior name="metaBehavior">

          <serviceMetadata httpGetEnabled="true"/>

        </behavior>

      </serviceBehaviors>

    </behaviors>

  </system.serviceModel>

</configuration>

Client的Form1.cs

namespace WindowsClient

{

    public partial class Form1 : Form

    {

        public Form1()

        {

            InitializeComponent();

        }

        private void buttonGetMessage_Click(object sender, EventArgs e)

        {

            HelloService.HelloServiceClient client = new HelloService.HelloServiceClient();

            labelGetMessage.Text = client.GetMessage(textBoxGetMessage.Text);

        }

        private void buttonGetEmployee_Click(object sender, EventArgs e)

        {

            HelloService.HelloServiceClient client = new HelloService.HelloServiceClient();

            HelloService.Employee employee = client.GetEmployee(Convert.ToInt32(textBoxGetEmployee.Text));

            labelId.Text = "Id: " + employee.Id.ToString();

            labelName.Text = "Name: " + employee.Name;

            labelBirthdate.Text = "Birthdate: " + employee.Birthdate.ToString("yyyy-MM-dd");

        }

    }

}

Client的app.config

<?xml version="1.0" encoding="utf-8" ?>

<configuration>

    <system.diagnostics>

        <sources>

            <source name="System.ServiceModel.MessageLogging" switchValue="Warning,ActivityTracing">

                <listeners>

                    <add type="System.Diagnostics.DefaultTraceListener" name="Default">

                        <filter type="" />

                    </add>

                    <add name="ServiceModelMessageLoggingListener">

                        <filter type="" />

                    </add>

                </listeners>

            </source>

            <source propagateActivity="true" name="System.ServiceModel" switchValue="Warning,ActivityTracing">

                <listeners>

                    <add type="System.Diagnostics.DefaultTraceListener" name="Default">

                        <filter type="" />

                    </add>

                    <add name="ServiceModelTraceListener">

                        <filter type="" />

                    </add>

                </listeners>

            </source>

        </sources>

        <sharedListeners>

            <add initializeData="c:\temp\helloservice\windowsclient\app_messages.svclog"

                type="System.Diagnostics.XmlWriterTraceListener, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"

                name="ServiceModelMessageLoggingListener" traceOutputOptions="Timestamp">

                <filter type="" />

            </add>

            <add initializeData="c:\temp\helloservice\windowsclient\app_tracelog.svclog"

                type="System.Diagnostics.XmlWriterTraceListener, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"

                name="ServiceModelTraceListener" traceOutputOptions="Timestamp">

                <filter type="" />

            </add>

        </sharedListeners>

        <trace autoflush="true" />

    </system.diagnostics>

    <system.serviceModel>

        <diagnostics>

            <messageLogging logEntireMessage="true" logMalformedMessages="true"

                logMessagesAtTransportLevel="true" />

        </diagnostics>

        <bindings>

            <basicHttpBinding>

                <binding name="BasicHttpBinding_IHelloService" />

            </basicHttpBinding>

        </bindings>

        <client>

            <endpoint address="http://192.168.6.47:8080/HelloService.svc/HelloService"

                binding="basicHttpBinding" bindingConfiguration="BasicHttpBinding_IHelloService"

                contract="HelloService.IHelloService" name="BasicHttpBinding_IHelloService" />

        </client>

    </system.serviceModel>

</configuration>

可以看到整个<system.diagnostics>部分都是用来配置Message Log和Trace Log的。

运行客户端，分别点击GetMessage按钮和GetEmployee按钮，调用两个WCF Service。

使用WCF的Trace与Message Log功能

（三）使用Microsoft Service Trace Viewer查看Message Log

使用Microsoft Service Trace Viewer来看Message Log文件app_messages.svclog（除了直接双击文件可以打开查看之外，也可以在VS Command Prompt上键入命令 SVCTRACEVIWER）。

因为调用了两次WCF Service，所以在左边面板看到两个Activity。

右边面板上面的第一条记录是Request，第二条记录是Reponse。

GetMessage的request

使用WCF的Trace与Message Log功能

<MessageLogTraceRecord>

  <Addressing xmlns="http://schemas.microsoft.com/2004/06/ServiceModel/Management/MessageTrace">

    <Action>http://tempuri.org/IHelloService/GetMessage</Action>

    <To>http://192.168.6.47:8080/HelloService.svc/HelloService</To>

  </Addressing>

  <HttpRequest xmlns="http://schemas.microsoft.com/2004/06/ServiceModel/Management/MessageTrace">

    <Method>POST</Method>

    <QueryString></QueryString>

    <WebHeaders>

      <VsDebuggerCausalityData>uIDPo0e70YqoeAJIhBNYwyqk3TgAAAAAdUnEReYNIkKGPM4fV5qHKsd96tBerBNIg+gFdw79jjIACQAA</VsDebuggerCausalityData>

    </WebHeaders>

  </HttpRequest>

  <s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">

    <s:Header>

      <ActivityId CorrelationId="f8f62c36-528f-40c7-9b4b-b6b45b57bedd" xmlns="http://schemas.microsoft.com/2004/09/ServiceModel/Diagnostics">271f2185-f90c-43b2-9086-ba9b8e0b3bd8</ActivityId>

    </s:Header>

    <s:Body>

      <GetMessage xmlns="http://tempuri.org/">

        <name>JF</name>

      </GetMessage>

    </s:Body>

  </s:Envelope>

</MessageLogTraceRecord>

GetMessage的response

使用WCF的Trace与Message Log功能

<MessageLogTraceRecord>

  <HttpResponse xmlns="http://schemas.microsoft.com/2004/06/ServiceModel/Management/MessageTrace">

    <StatusCode>OK</StatusCode>

    <StatusDescription>OK</StatusDescription>

    <WebHeaders>

      <Content-Encoding></Content-Encoding>

      <Vary>Accept-Encoding</Vary>

      <Content-Length>145</Content-Length>

      <Content-Type>text/xml; charset=utf-8</Content-Type>

      <Date>Thu, 16 Oct 2014 14:37:35 GMT</Date>

      <Server>Microsoft-IIS/8.0</Server>

      <X-Powered-By>ASP.NET</X-Powered-By>

    </WebHeaders>

  </HttpResponse>

  <s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">

    <s:Header></s:Header>

    <s:Body>

      <GetMessageResponse xmlns="http://tempuri.org/">

        <GetMessageResult>Hello JF</GetMessageResult>

      </GetMessageResponse>

    </s:Body>

  </s:Envelope>

</MessageLogTraceRecord>

GetEmployee的request

使用WCF的Trace与Message Log功能

<MessageLogTraceRecord>

  <Addressing xmlns="http://schemas.microsoft.com/2004/06/ServiceModel/Management/MessageTrace">

    <Action>http://tempuri.org/IHelloService/GetEmployee</Action>

    <To>http://192.168.6.47:8080/HelloService.svc/HelloService</To>

  </Addressing>

  <HttpRequest xmlns="http://schemas.microsoft.com/2004/06/ServiceModel/Management/MessageTrace">

    <Method>POST</Method>

    <QueryString></QueryString>

    <WebHeaders>

      <VsDebuggerCausalityData>uIDPo0i70YqoeAJIhBNYwyqk3TgAAAAAdUnEReYNIkKGPM4fV5qHKsd96tBerBNIg+gFdw79jjIACQAA</VsDebuggerCausalityData>

    </WebHeaders>

  </HttpRequest>

  <s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">

    <s:Header>

      <ActivityId CorrelationId="478b437e-923a-41bc-bbd0-fc932fa664ed" xmlns="http://schemas.microsoft.com/2004/09/ServiceModel/Diagnostics">0fa3ee85-87fc-4a76-8047-965b049882c6</ActivityId>

    </s:Header>

    <s:Body>

      <GetEmployee xmlns="http://tempuri.org/">

        <id>1</id>

      </GetEmployee>

    </s:Body>

  </s:Envelope>

</MessageLogTraceRecord>

GetEmployee的response

使用WCF的Trace与Message Log功能

<MessageLogTraceRecord>

  <HttpResponse xmlns="http://schemas.microsoft.com/2004/06/ServiceModel/Management/MessageTrace">

    <StatusCode>OK</StatusCode>

    <StatusDescription>OK</StatusDescription>

    <WebHeaders>

      <Content-Encoding></Content-Encoding>

      <Vary>Accept-Encoding</Vary>

      <Content-Length>247</Content-Length>

      <Content-Type>text/xml; charset=utf-8</Content-Type>

      <Date>Thu, 16 Oct 2014 14:37:38 GMT</Date>

      <Server>Microsoft-IIS/8.0</Server>

      <X-Powered-By>ASP.NET</X-Powered-By>

    </WebHeaders>

  </HttpResponse>

  <s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">

    <s:Header></s:Header>

    <s:Body>

      <GetEmployeeResponse xmlns="http://tempuri.org/">

        <GetEmployeeResult xmlns:a="http://jfzhu.com/2014/10/16/Employee" xmlns:i="http://www.w3.org/2001/XMLSchema-instance">

          <a:Id>1</a:Id>

          <a:Name>Neil Klugman</a:Name>

          <a:Birthdate>1930-01-31T00:00:00</a:Birthdate>

        </GetEmployeeResult>

      </GetEmployeeResponse>

    </s:Body>

  </s:Envelope>

</MessageLogTraceRecord>

（四）使用Fiddler来查看Message Log

如果使用Fiddler来查看Message Log的话，就不需要使用WCF Service Configuration Editor开启Log功能了。下图Fiddler中左边面板的两条记录分表表示两次WCF Service的调用。

右边面板上半部分表示request，下半部分表示response，基本和Microsoft Service Trace Viewer的布局差不多。

使用WCF的Trace与Message Log功能

GetMessage的调用：

使用WCF的Trace与Message Log功能

使用WCF的Trace与Message Log功能

request:

<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">

  <s:Header>

    <ActivityId CorrelationId="a0148182-42f9-421c-b7d0-7a9f3edb7364" xmlns="http://schemas.microsoft.com/2004/09/ServiceModel/Diagnostics">7b920c1f-51b6-4ee0-9e32-e2f01fcd2e4c</ActivityId>

  </s:Header>

  <s:Body>

    <GetMessage xmlns="http://tempuri.org/">

      <name>JF</name>

    </GetMessage>

  </s:Body>

</s:Envelope>

response:

<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">

  <s:Body>

    <GetMessageResponse xmlns="http://tempuri.org/">

      <GetMessageResult>Hello JF</GetMessageResult>

    </GetMessageResponse>

  </s:Body>

</s:Envelope>

GetEmployee的调用：

使用WCF的Trace与Message Log功能

使用WCF的Trace与Message Log功能

request:

<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">

  <s:Header>

    <ActivityId CorrelationId="ee409ce5-5ac4-4526-9f24-155bdfe86b0e" xmlns="http://schemas.microsoft.com/2004/09/ServiceModel/Diagnostics">2968a624-c51a-4247-a4ce-73e0548585fd</ActivityId>

  </s:Header>

  <s:Body>

    <GetEmployee xmlns="http://tempuri.org/">

      <id>1</id>

    </GetEmployee>

  </s:Body>

</s:Envelope>

response:

<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">

  <s:Body>

    <GetEmployeeResponse xmlns="http://tempuri.org/">

      <GetEmployeeResult xmlns:a="http://jfzhu.com/2014/10/16/Employee" xmlns:i="http://www.w3.org/2001/XMLSchema-instance">

        <a:Id>1</a:Id>

        <a:Name>Neil Klugman</a:Name>

        <a:Birthdate>1930-01-31T00:00:00</a:Birthdate>

      </GetEmployeeResult>

    </GetEmployeeResponse>

  </s:Body>

</s:Envelope>

（五）总结

  • Visual Studio提供了自己的Message Log和Trace Log的功能，本文主要演示了如何开启他们，以及如何查看Message Log。
  • 开启这些功能可以使用WCF Service Configuration Editor。
  • 查看这些Log可以使用Microsoft Service Trace Viewer。
  • Logging功能可以在客户端做也可以在服务器端做。
  • 不使用微软提供的工具，使用Fiddler也可以监控到调用WCF Service时发送和收到的消息。

使用WCF的Trace与Message Log功能

相关文章