1 前言
笔者公司内有一套GlusterFS分布式存储，最近数据分区的文件系统提示错误，群集有一个Brick需要替换掉。
基于稳妥操作的原则，笔者要先搭建测试环境并通过测试后才能在真实环境中执行，以下是笔者的测试文档，给有需要的博友参阅，另外笔者在发表本文时已经在生产环境通过验证。
服务器的故障日志（有修复文件系统方法的博友欢迎指教）：
cat /var/log/messages
可以看到如下信息：
Mar 21 14:58:04 GH01 kernel: XFS (dm-5): xfs_log_force: error 5 returned.
2 实践部分
2.1 环境信息
2.1.1 主机信息
GlusterH0[1-5]:
hostname=GlusterH0[1-5].cmdschool.org
ipaddress=10.168.0.19[1-5]
2.1.2 名称解析配置
In GlusterH0[1-6]
echo "10.168.0.191 GlusterH01.cmdschool.org GH01" >> /etc/hostsecho "10.168.0.192 GlusterH02.cmdschool.org GH02" >> /etc/hostsecho "10.168.0.193 GlusterH03.cmdschool.org GH03" >> /etc/hostsecho "10.168.0.194 GlusterH04.cmdschool.org GH04" >> /etc/hostsecho "10.168.0.195 GlusterH05.cmdschool.org GH05" >> /etc/hosts
2.1.3 配置YUM源
In GlusterH0[1-6]
yum install -y centos-release-gluster38
2.1.4 关闭防火墙
In GlusterH0[1-6]
/etc/init.d/iptables stopchkconfig iptables off
2.2 配置数据存储根目录
In GlusterH0[1-5]
2.2.1 新建分区
fdisk /dev/sdb
详细向导如下：
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabelBuilding a new DOS disklabel with disk identifier 0x089fd1ab.Changes will remain in memory only, until you decide to write them.After that, of course, the previous content won't be recoverable.Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)WARNING: DOS-compatible mode is deprecated. It's strongly recommended to switch off the mode (command 'c') and change display units to sectors (command 'u').Command (m for help): nCommand action e extended p primary partition (1-4)pPartition number (1-4): 1First cylinder (1-26108, default 1): Using default value 1Last cylinder, +cylinders or +size{K,M,G} (1-26108, default 26108): Using default value 26108Command (m for help): wThe partition table has been altered!Calling ioctl() to re-read partition table.Syncing disks.
2.2.2 发现并校验
partx /dev/sdbls /dev/sdb*
2.2.3 创建文件系统
mkfs.xfs -i size=512 /dev/sdb1
2.2.4 配置挂载
mkdir -p /dataecho '/dev/sdb1 /data xfs defaults 1 2' >> /etc/fstabmount -a && mount
2.3 配置glusterfs服务端
In GlusterH0[1-5] :
2.3.1 安装yum源
yum install -y glusterfs-server
2.3.2 启动服务
/etc/init.d/glusterd startchkconfig glusterd on
2.4 配置信任池
In GlusterH01:
gluster peer probe GH02gluster peer probe GH03gluster peer probe GH04
显示如成功信息：
peer probe: success.
检查信任池状态
gluster peer status
显示如下：
Number of Peers: 3Hostname: GH02Uuid: e935be20-6157-4bc6-804b-a6901850211fState: Accepted peer request (Connected)Hostname: GH03Uuid: d91cf978-71d7-4734-b395-fae7ccf4c040State: Accepted peer request (Connected)Hostname: GH04Uuid: e05ea224-72f7-48c5-a73a-eeeb253d171dState: Accepted peer request (Connected)
检查本与其他服务器的连接状态
netstat -antp | grep glusterd
显示如下：
tcp 0 0 0.0.0.0:24007 0.0.0.0:* LISTEN 1213/glusterdtcp 0 0 10.168.0.191:24007 10.168.0.192:49150 ESTABLISHED 1213/glusterdtcp 0 0 10.168.0.191:49149 10.168.0.193:24007 ESTABLISHED 1213/glusterdtcp 0 0 10.168.0.191:24007 10.168.0.193:49149 ESTABLISHED 1213/glusterdtcp 0 0 10.168.0.191:49151 10.168.0.192:24007 ESTABLISHED 1213/glusterdtcp 0 0 10.168.0.191:49150 10.168.0.194:24007 ESTABLISHED 1213/glusterdtcp 0 0 10.168.0.191:24007 10.168.0.194:49151 ESTABLISHED 1213/glusterd
注：以上可以看出本机与其他的每个brick都有两个TCP连接，一共6个。
2.5 配置GlusterFS卷
2.5.1 配置存储位置
In GlusterH0[1-4] :
mkdir -p /data/brick1/gv0
2.5.2 创建Gluster卷
In GlusterH01 :
gluster volume create gv0 replica 2 transport tcp GH01:/data/brick1/gv0 GH02:/data/brick1/gv0 GH03:/data/brick1/gv0 GH04:/data/brick1/gv0
显示如成功信息：
volume create: gv0: success: please start the volume to access data
2.5.3 启动GlusterFS卷
In GlusterH01 :
gluster volume start gv0
显示如成功信息：
volume start: gv0: success
2.5.4 验证卷的信息
In GlusterH01 :
gluster volume info
显示如下：
Volume Name: gv0Type: Distributed-ReplicateVolume ID: cfea514c-cdce-4ae4-bcd9-bf56f4173271Status: StartedSnapshot Count: 0Number of Bricks: 2 x 2 = 4Transport-type: tcpBricks:Brick1: GH01:/data/brick1/gv0Brick2: GH02:/data/brick1/gv0Brick3: GH03:/data/brick1/gv0Brick4: GH04:/data/brick1/gv0Options Reconfigured:transport.address-family: inetperformance.readdir-ahead: onnfs.disable: on
2.6 配置Gluster客户端
In GlusterH01 :
2.6.1 安装客户端相关包
yum install -y glusterfs-fuse
2.6.2 手动挂载卷gv0到本地
mount -t glusterfs GH01:/gv0 /mnt
2.7 测试Gluster卷
2.7.1 写入测试
In GlusterH01 :
for i in `seq -w 1 100`; do cp -rp /var/log/messages /mnt/copy-test-$i; done
2.7.2 写入确认
In GlusterH01 :
ls -lA /mnt/ | wc -l
In GlusterH0[1-4] :
ls -lA /data/brick1/gv0/
2.8 模拟brick故障
2.8.1 查看当前存储状态
In GlusterH01 :
gluster volume status
显示如下：
Status of volume: gv0Gluster process TCP Port RDMA Port Online Pid------------------------------------------------------------------------------Brick GH01:/data/brick1/gv0 49153 0 Y 1447Brick GH02:/data/brick1/gv0 49153 0 Y 1379Brick GH03:/data/brick1/gv0 49153 0 Y 1281Brick GH04:/data/brick1/gv0 49153 0 Y 1375Self-heal Daemon on localhost N/A N/A Y 1506Self-heal Daemon on GH02 N/A N/A Y 1440Self-heal Daemon on GH04 N/A N/A Y 1430Self-heal Daemon on GH03 N/A N/A Y 1430Task Status of Volume gv0------------------------------------------------------------------------------There are no active volume tasks
注：注意到Online项全部为“Y”
2.8.2 制造故障
In GlusterH01 :
vim /etc/fstab
注释掉如下行：
#/dev/sdb1 /data xfs defaults 1 2
重启服务器
reboot
2.8.3 查看当前存储状态
In GlusterH01 :
gluster volume status
显示如下：
Status of volume: gv0Gluster process TCP Port RDMA Port Online Pid------------------------------------------------------------------------------Brick GH01:/data/brick1/gv0 N/A N/A N N/ABrick GH02:/data/brick1/gv0 49153 0 Y 1379Brick GH03:/data/brick1/gv0 49153 0 Y 1281Brick GH04:/data/brick1/gv0 49153 0 Y 1375Self-heal Daemon on localhost N/A N/A Y 1484Self-heal Daemon on GH02 N/A N/A Y 1453Self-heal Daemon on GH03 N/A N/A Y 1443Self-heal Daemon on GH04 N/A N/A Y 1444Task Status of Volume gv0------------------------------------------------------------------------------There are no active volume tasks
注：注意到GH01的Online项为“N”
注：文件系统故障，假设物理硬盘没有问题或已经更换阵列中的硬盘
2.9 恢复故障brick方法
2.9.1 结束故障brick的进程
In GlusterH01 :
gluster volume status
显示如下：
Status of volume: gv0Gluster process TCP Port RDMA Port Online Pid------------------------------------------------------------------------------Brick GH01:/data/brick1/gv0 N/A N/A N N/ABrick GH02:/data/brick1/gv0 49153 0 Y 1379Brick GH03:/data/brick1/gv0 49153 0 Y 1281Brick GH04:/data/brick1/gv0 49153 0 Y 1375Self-heal Daemon on localhost N/A N/A Y 1484Self-heal Daemon on GH02 N/A N/A Y 1453Self-heal Daemon on GH03 N/A N/A Y 1443Self-heal Daemon on GH04 N/A N/A Y 1444Task Status of Volume gv0------------------------------------------------------------------------------There are no active volume tasks
注：如果状态Online项为“N”的GH01存在PID号（不显示N/A）应当使用如下命令结束掉进程方可继续下面步骤。
kill -15 pid
2.9.2 创建新的数据目录
In GlusterH01:
mkfs.xfs -i size=512 /dev/sdb1
编辑fstab
vim /etc/fstab
去掉注释：
/dev/sdb1 /data xfs defaults 1 2
重新挂载文件系统：
mount -a
增加新的数据存放文件夹（不可以与之前目录一样）
mkdir -p /data/brick1/gv1
2.9.3 查询故障节点的备份节点(gh02)目录的扩展属性
In GlusterH01:
ssh gh02 getfattr -d -m. -e hex /data/brick1/gv0
显示如下：
getfattr: Removing leading '/' from absolute path names# file: data/brick1/gv0security.selinux=0x756e636f6e66696e65645f753a6f626a6563745f723a686f6d655f726f6f745f743a733000trusted.gfid=0x00000000000000000000000000000001trusted.glusterfs.dht=0x0000000100000000000000007ffffffetrusted.glusterfs.volume-id=0xcfea514ccdce4ae4bcd9bf56f4173271
2.9.4 挂载卷并触发自愈
In GlusterH01:
1）将卷挂到mnt目录下
mount -t glusterfs GH01:/gv0 /mnt
2）新建一个卷中不存在的目录并删除
mkdir /mnt/testDir001rmdir /mnt/testDir001
3）设置扩展属性触发自愈
setfattr -n trusted.non-existent-key -v abc /mntsetfattr -x trusted.non-existent-key /mnt
2.9.5 检查当前节点是否挂起xattrs
In GlusterH01:
1）再次查询故障节点的备份节点(gh02)目录的扩展属性
ssh gh02 getfattr -d -m. -e hex /data/brick1/gv0
发现如下：
# file: data/brick1/gv0security.selinux=0x756e636f6e66696e65645f753a6f626a6563745f723a686f6d655f726f6f745f743a733000trusted.afr.dirty=0x000000000000000000000000trusted.afr.gv0-client-0=0x000000000000000200000002trusted.gfid=0x00000000000000000000000000000001trusted.glusterfs.dht=0x0000000100000000000000007ffffffetrusted.glusterfs.volume-id=0xcfea514ccdce4ae4bcd9bf56f4173271getfattr: Removing leading '/' from absolute path names
注：留意第4行,表示xattrs已经将源标记为gh02:/data/brick1/gv0
2）检查卷的状态是否显示需要替换
In GlusterH01:
gluster volume heal gv0 info
显示如下：
Brick GH01:/data/brick1/gv0Status: Transport endpoint is not connectedNumber of entries: -Brick GH02:/data/brick1/gv0/Status: ConnectedNumber of entries: 1Brick GH03:/data/brick1/gv0Status: ConnectedNumber of entries: 0Brick GH04:/data/brick1/gv0Status: ConnectedNumber of entries: 0
注：状态提示传输端点未连接（第2行）
2.9.6 使用强制提交完成操作
In GlusterH01:
gluster volume replace-brick gv0 GH01:/data/brick1/gv0 GH01:/data/brick1/gv1 commit force
提示如下表示正常完成：
volume replace-brick: success: replace-brick commit force operation successful
注：也可以将数据恢复到另外一台服务器，详细命令如下（可选）：
gluster peer probe GH05gluster volume replace-brick gv0 GH01:/data/brick1/gv0 GH05:/data/brick1/gv0 commit force
2.9.7 检查存储的在线状态
In GlusterH01:
gluster volume status
显示如下：
Status of volume: gv0Gluster process TCP Port RDMA Port Online Pid------------------------------------------------------------------------------Brick GH01:/data/brick1/gv1 49153 0 Y 1658Brick GH02:/data/brick1/gv0 49153 0 Y 1406Brick GH03:/data/brick1/gv0 49153 0 Y 1371Brick GH04:/data/brick1/gv0 49153 0 Y 1406Self-heal Daemon on localhost N/A N/A Y 1663Self-heal Daemon on GH04 N/A N/A Y 1703Self-heal Daemon on GH03 N/A N/A Y 1695Self-heal Daemon on GH02 N/A N/A Y 1726Task Status of Volume gv0------------------------------------------------------------------------------There are no active volume tasks
另外，如果更换到其他服务器状态显示如下：
Status of volume: gv0Gluster process TCP Port RDMA Port Online Pid------------------------------------------------------------------------------Brick GH05:/data/brick1/gv0 49152 0 Y 1448Brick GH02:/data/brick1/gv0 49153 0 Y 1270Brick GH03:/data/brick1/gv0 49153 0 Y 1328Brick GH04:/data/brick1/gv0 49153 0 Y 1405Self-heal Daemon on localhost N/A N/A Y 1559Self-heal Daemon on GH02 N/A N/A Y 1489Self-heal Daemon on GH03 N/A N/A Y 1479Self-heal Daemon on GH04 N/A N/A Y 1473Self-heal Daemon on GH05 N/A N/A Y 1453Task Status of Volume gv0------------------------------------------------------------------------------There are no active volume tasks
参阅文档
===================================
官方更换操作：
http://gluster.readthedocs.io/en/latest/Administrator%20Guide/Managing%20Volumes/#shrinking-volumes
本文出自 “老谭linux集群博客” 博客，请务必保留此出处http://cmdschool.blog.51cto.com/2420395/1908647