一、安装环境
1、CentOS5.5
2、php5.4
3、MySQL5.5.19
二、安装程序依赖库和开发环境
为了省事把所需要的库文件全都安装上，可以使用rpm包安装，也可以用yum命令安装，
1 |
yum -y install gcc gcc-c++ autoconf libjpeg libjpeg-devel libpng libpng-devel freetype freetype-devel libxml2 libxml2-devel zlib zlib-devel glibc glibc-devel glib2 glib2-devel bzip2 bzip2-devel ncurses ncurses-devel curl curl-devel e2fsprogs e2fsprogs-devel krb5 krb5-devel libidn libidn-devel openssl openssl-devel openldap openldap-devel nss_ldap openldap-clients openldap-servers
|
#nginx所需要的库文件件
yum -y install pcre-devel zlib-devel
#PHP依赖的库文件
1 |
yum -y install gd-devel libjpeg-devel libpng-devel freetype-devel libxml2-devel curl-devel freetype-devel
|
三、安装步骤
1、安装mysql5 参考之前的文章：
http://www.num123.com/post/108
2、安装PHP
注：php在5.3.3以后的版本都已经集成了php-fpm,不需要在打php的fastcgi里程管理器补丁了。
#安装库文件
#1
1 |
tar zxvf libiconv-1.14.tar.gz
|
3 |
./configure --prefix=/usr/local
|
#2
1 |
tar zxvf libmcrypt-2.5.8.tar.gz
|
7 |
./configure --enable-ltdl-install
|
#3
1 |
tar zxvf mhash-0.9.9.9.tar.gz
|
#4
01 |
ln -s /usr/local/lib/libmcrypt.la /usr/lib/libmcrypt.la
|
02 |
ln -s /usr/local/lib/libmcrypt.so /usr/lib/libmcrypt.so
|
03 |
ln -s /usr/local/lib/libmcrypt.so.4 /usr/lib/libmcrypt.so.4
|
04 |
ln -s /usr/local/lib/libmcrypt.so.4.4.8 /usr/lib/libmcrypt.so.4.4.8
|
05 |
ln -s /usr/local/lib/libmhash.a /usr/lib/libmhash.a
|
06 |
ln -s /usr/local/lib/libmhash.la /usr/lib/libmhash.la
|
07 |
ln -s /usr/local/lib/libmhash.so /usr/lib/libmhash.so
|
08 |
ln -s /usr/local/lib/libmhash.so.2 /usr/lib/libmhash.so.2
|
09 |
ln -s /usr/local/lib/libmhash.so.2.0.1 /usr/lib/libmhash.so.2.0.1
|
10 |
ln -s /usr/local/bin/libmcrypt-config /usr/bin/libmcrypt-config
|
#5
1 |
tar -zxvf mcrypt-2.6.8.tar.gz
|
#6
01 |
mkdir -p /home/webserver/php5.4
|
02 |
tar zxvf php-5.4.0.tar.gz
|
04 |
./configure --prefix=/home/webserver/php5.4 \ |
05 |
--with-config-file-path=/etc \
|
06 |
--with-iconv-dir=/usr/local/ --with-freetype-dir \
|
07 |
--with-mysql=/usr/local/mysql \
|
08 |
--with-mysqli=/usr/local/mysql/bin/mysql_config \
|
09 |
--with-jpeg-dir --with-png-dir --with-zlib \
|
10 |
--with-mhash --enable-sockets --enable-ftp \
|
11 |
--with-libxml-dir --enable-xml --disable-rpath \
|
13 |
--enable-shmop --enable-sysvsem \
|
14 |
--enable-inline-optimization --with-curl \
|
17 |
--enable-mbstring --with-mcrypt --with-gd \
|
18 |
--enable-gd-native-ttf --with-openssl --with-mhash \
|
19 |
--enable-pcntl --enable-sockets --with-ldap --with-ldap-sasl \
|
21 |
--with-xmlrpc --enable-zip --enable-soap \
|
23 |
make ZEND_EXTRA_LIBS='-liconv'
|
25 |
cp php.ini-production /etc/php.ini
|
vi /etc/php.ini
修改为cgi.fix_pathinfo=0，防止Nginx文件类型错误解析漏洞。
#在编译的时候有可能会出去mysqlclient库找不到之类的问题，加上下面两行即可
ln -s /usr/local/mysql/lib/libmysqlclient.so /usr/lib/
ln -s /usr/local/mysql/lib/libmysqlclient.so.18 /usr/lib/libmysqlclient.so.18
#7 更改php-pfm配置文件
创建用户nginx且属于www组
groupadd www
useradd -s /sbin/nologin -M nginx -g www
cd /home/webserver/php5.4/etc/
mv php-fpm.conf.default php-fpm.conf
vi php-fpm.conf
根据需要调整参数：
pid = run/php-fpm.pid
user = nginx
group = www
pm.max_children = 300
pm.start_servers = 20
pm.min_spare_servers = 40
pm.max_spare_servers = 60
pm.max_requests = 3000
#检查php-fpm配置语法是否正确
/home/webserver/php5.4/sbin/php-fpm -t
#出现NOTICE: configuration file /home/webserver/php5.4/etc/php-fpm.conf test is successful 测试成功
#启动php-fpm并在后台运行
/home/webserver/php5.4/sbin/php-fpm &
#设置开机启动
vi /etc/rc.d/rc.local
#在行末加入
/home/webserver/php5.4/sbin/php-fpm &
PHP5.3.3以上版本的php-fpm重启、停止命令已经不是php-fpm start|stop|reload了，需要使用信号控制：
master进程可以理解以下信号
INT, TERM 立刻终止
QUIT 平滑终止
USR1 重新打开日志文件
USR2 平滑重载所有worker进程并重新载入配置和二进制模块
示例：
php-fpm 关闭：
kill -INT `cat /home/webserver/php5.4/var/run/php-fpm.pid`
php-fpm 重启：
kill -USR2 `cat /home/webserver/php5.4/var/run/php-fpm.pid`
我们也可以不用cat /home/webserver/php5.4/var/run/php-fpm.pid来查看主进程号，面通过ps -eaf命令来查看主进程号
查看php-fpm进程总数：
ps -A | grep php-fpm |wc -l
3、安装nginx
#安装PCRE,perl兼容的正则表达式
tar zxvf pcre-8.21.tar.gz
cd pcre-8.21
./configure
make && make install
#安装nginx
tar zxvf nginx-1.0.14.tar.gz
cd nginx-1.0.14
./configure --user=nginx --group=www \
--prefix=/home/webserver/nginx1.0.14 \
--with-http_stub_status_module \
--with-http_ssl_module \
--with-pcre \
--with-http_flv_module
#检测配置文件
/home/webserver/nginx1.0.14/sbin/nginx -t
#出现以下提示表示成功
#nginx: the configuration file /home/webserver/nginx1.0.14/conf/nginx.conf syntax is ok
#nginx: configuration file /home/webserver/nginx1.0.14/conf/nginx.conf test is successful
#开启Nginx
/home/webserver/nginx1.0.14/sbin/nginx
#平滑重启Nginx
/home/webserver/nginx1.0.14/sbin/nginx -s reload
#添加开机启动
vi /etc/rc.d/rc.local
#最后移行加入
/home/webserver/nginx1.0.14/sbin/nginx
#####nginx.conf文件配置示例###########
user nginx www;
worker_processes 10;
worker_rlimit_nofile 65535;
events
{
use epoll;
worker_connections 3000;
}
http
{
include mime.types;
default_type application/octet-stream;
server_names_hash_bucket_size 128;
client_header_buffer_size 32k;
large_client_header_buffers 4 32k;
client_max_body_size 8m;
sendfile on;
tcp_nopush on;
keepalive_timeout 60;
tcp_nodelay on;
fastcgi_connect_timeout 300;
fastcgi_send_timeout 300;
fastcgi_read_timeout 300;
fastcgi_buffer_size 64k;
fastcgi_buffers 4 64k;
fastcgi_busy_buffers_size 128k;
fastcgi_temp_file_write_size 128k;
gzip on;
gzip_min_length 1k;
gzip_buffers 4 16k;
gzip_http_version 1.0;
gzip_comp_level 2;
gzip_types text/plain application/x-javascript text/css application/xml;
gzip_vary on;
server
{
listen 80;
#server_name www.num123.com;
index index.html index.htm index.php;
root html;
location ~ .*\.(php|php5)?$
{
fastcgi_pass 127.0.0.1:9000;
fastcgi_index index.php;
include fastcgi.conf;
}
location ~ .*\.(gif|jpg|jpeg|png|bmp|swf)$
{
expires 1d;
}
location ~ .*\.(js|css)?$
{
expires 1h;
}
access_log off;
}
}
