mysql数据库在配置时包含很多信息：端口号，字符编码，指定根路径 basedir，指定数据存放的路径等信息
mysql的字体编码分为两种：
服务器编码
客户端输入的编码
通常服务器的编码都是utf-8的，可以支持世界各国文字，但是通常客户端输入的一般都可以设置为GBK的编码：
my.ini文件内容
# MySQL Server Instance Configuration File
# ----------------------------------------------------------------------
# Generated by the MySQL Server Instance Configuration Wizard
#
#
# Installation Instructions
# ----------------------------------------------------------------------
#
# On Linux you can copy this file to /etc/my.cnf to set global options,
# mysql-data-dir/my.cnf to set server-specific options
# (@localstatedir@ for this installation) or to
# ~/.my.cnf to set user-specific options.
#
# On Windows you should keep this file in the installation directory
# of your server (e.g. C:\Program Files\MySQL\MySQL Server 4.1). To
# make sure the server reads the config file use the startup option
# "--defaults-file".
#
# To run run the server from the command line, execute this in a
# command line shell, e.g.
# mysqld --defaults-file="C:\Program Files\MySQL\MySQL Server 4.1\my.ini"
#
# To install the server as a Windows service manually, execute this in a
# command line shell, e.g.
# mysqld --install MySQL41 --defaults-file="C:\Program Files\MySQL\MySQL Server 4.1\my.ini"
#
# And then execute this in a command line shell to start the server, e.g.
# net start MySQL41
#
#
# Guildlines for editing this file
# ----------------------------------------------------------------------
#
# In this file, you can use all long options that the program supports.
# If you want to know the options a program supports, start the program
# with the "--help" option.
#
# More detailed information about the individual options can also be
# found in the manual.
#
#
# CLIENT SECTION
# ----------------------------------------------------------------------
#
# The following options will be read by MySQL client applications.
# Note that only client applications shipped by MySQL are guaranteed
# to read this section. If you want your own MySQL client program to
# honor these values, you need to specify it as an option during the
# MySQL client library initialization.
#
[client] port=3306 [mysql] default-character-set=gbk # SERVER SECTION
# ----------------------------------------------------------------------
#
# The following options will be read by the MySQL Server. Make sure that
# you have installed the server correctly (see above) so it reads this
# file.
#
[mysqld] # The TCP/IP Port the MySQL Server will listen on
port=3306 #Path to installation directory. All paths are usually resolved relative to this.
basedir="D:/MySQL Server 5.0/" #Path to the database root
datadir="D:/MySQL Server 5.0/Data/" # The default character set that will be used when a new schema or table is
# created and no character set is defined
default-character-set=gbk # The default storage engine that will be used when create new tables when
default-storage-engine=INNODB # Set the SQL mode to strict
sql-mode="STRICT_TRANS_TABLES,NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION" # The maximum amount of concurrent sessions the MySQL server will
# allow. One of these connections will be reserved for a user with
# SUPER privileges to allow the administrator to login even if the
# connection limit has been reached.
max_connections=100 # Query cache is used to cache SELECT results and later return them
# without actual executing the same query once again. Having the query
# cache enabled may result in significant speed improvements, if your
# have a lot of identical queries and rarely changing tables. See the
# "Qcache_lowmem_prunes" status variable to check if the current value
# is high enough for your load.
# Note: In case your tables change very often or if your queries are
# textually different every time, the query cache may result in a
# slowdown instead of a performance improvement.
query_cache_size=14M # The number of open tables for all threads. Increasing this value
# increases the number of file descriptors that mysqld requires.
# Therefore you have to make sure to set the amount of open files
# allowed to at least 4096 in the variable "open-files-limit" in
# section [mysqld_safe]
table_cache=256 # Maximum size for internal (in-memory) temporary tables. If a table
# grows larger than this value, it is automatically converted to disk
# based table This limitation is for a single table. There can be many
# of them.
tmp_table_size=17M # How many threads we should keep in a cache for reuse. When a client
# disconnects, the client's threads are put in the cache if there aren't
# more than thread_cache_size threads from before. This greatly reduces
# the amount of thread creations needed if you have a lot of new
# connections. (Normally this doesn't give a notable performance
# improvement if you have a good thread implementation.)
thread_cache_size=8 #*** MyISAM Specific options # The maximum size of the temporary file MySQL is allowed to use while
# recreating the index (during REPAIR, ALTER TABLE or LOAD DATA INFILE.
# If the file-size would be bigger than this, the index will be created
# through the key cache (which is slower).
myisam_max_sort_file_size=100G # If the temporary file used for fast index creation would be bigger
# than using the key cache by the amount specified here, then prefer the
# key cache method. This is mainly used to force long character keys in
# large tables to use the slower key cache method to create the index.
myisam_max_extra_sort_file_size=100G # If the temporary file used for fast index creation would be bigger
# than using the key cache by the amount specified here, then prefer the
# key cache method. This is mainly used to force long character keys in
# large tables to use the slower key cache method to create the index.
myisam_sort_buffer_size=33M # Size of the Key Buffer, used to cache index blocks for MyISAM tables.
# Do not set it larger than 30% of your available memory, as some memory
# is also required by the OS to cache rows. Even if you're not using
# MyISAM tables, you should still set it to 8-64M as it will also be
# used for internal temporary disk tables.
key_buffer_size=22M # Size of the buffer used for doing full table scans of MyISAM tables.
# Allocated per thread, if a full scan is needed.
read_buffer_size=64K
read_rnd_buffer_size=256K # This buffer is allocated when MySQL needs to rebuild the index in
# REPAIR, OPTIMZE, ALTER table statements as well as in LOAD DATA INFILE
# into an empty table. It is allocated per thread so be careful with
# large settings.
sort_buffer_size=256K #*** INNODB Specific options *** # Use this option if you have a MySQL server with InnoDB support enabled
# but you do not plan to use it. This will save memory and disk space
# and speed up some things.
#skip-innodb # Additional memory pool that is used by InnoDB to store metadata
# information. If InnoDB requires more memory for this purpose it will
# start to allocate it from the OS. As this is fast enough on most
# recent operating systems, you normally do not need to change this
# value. SHOW INNODB STATUS will display the current amount used.
innodb_additional_mem_pool_size=2M # If set to 1, InnoDB will flush (fsync) the transaction logs to the
# disk at each commit, which offers full ACID behavior. If you are
# willing to compromise this safety, and you are running small
# transactions, you may set this to 0 or 2 to reduce disk I/O to the
# logs. Value 0 means that the log is only written to the log file and
# the log file flushed to disk approximately once per second. Value 2
# means the log is written to the log file at each commit, but the log
# file is only flushed to disk approximately once per second.
innodb_flush_log_at_trx_commit=1 # The size of the buffer InnoDB uses for buffering log data. As soon as
# it is full, InnoDB will have to flush it to disk. As it is flushed
# once per second anyway, it does not make sense to have it very large
# (even with long transactions).
innodb_log_buffer_size=1M # InnoDB, unlike MyISAM, uses a buffer pool to cache both indexes and
# row data. The bigger you set this the less disk I/O is needed to
# access data in tables. On a dedicated database server you may set this
# parameter up to 80% of the machine physical memory size. Do not set it
# too large, though, because competition of the physical memory may
# cause paging in the operating system. Note that on 32bit systems you
# might be limited to 2-3.5G of user level memory per process, so do not
# set it too high.
innodb_buffer_pool_size=40M # Size of each log file in a log group. You should set the combined size
# of log files to about 25%-100% of your buffer pool size to avoid
# unneeded buffer pool flush activity on log file overwrite. However,
# note that a larger logfile size will increase the time needed for the
# recovery process.
innodb_log_file_size=10M # Number of threads allowed inside the InnoDB kernel. The optimal value
# depends highly on the application, hardware as well as the OS
# scheduler properties. A too high value may lead to thread thrashing.
innodb_thread_concurrency=10
（1）设置客户端编码：
[client]
port=3306
[mysql]
default-character-set=gbk
（2）设置服务器端的编码（gbk），端口号（3306），初始化mysql信息，根文件夹和数据文件夹
[mysqld]
# The TCP/IP Port the MySQL Server will listen on
port=3306
#Path to installation directory. All paths are usually resolved relative to this.
basedir="D:/MySQL Server 5.0/"
#Path to the database root
datadir="D:/MySQL Server 5.0/Data/"
# The default character set that will be used when a new schema or table is
# created and no character set is defined
default-character-set=gbk
（3）my.ini文件的详细解析
[mysqld]
port = 3306
socket = /tmp/mysql.sock
# 设置mysql的安装目录
basedir=F:\\Hzq Soft\\MySql Server 51GA
# 设置mysql数据库的数据的存放目录，必须是data，或者是\\xxx-data
datadir=F:\\Hzq Soft\\MySql Server 51GA\\data
#innodb_log_arch_dir 默认datadir
#innodb_log_group_home_dir 默认datadir
# 设置mysql服务器的字符集，默认编码
default-character-set=utf8
#连接数的操作系统监听队列数量，如果经常出现“拒绝连接”错误可适当增加此值
back_log = 50
#不使用接听TCP / IP端口方法，mysqld通过命名管道连接
#skip-networking
# 最大连接数量
max_connections = 90
#打开表的线程数量限定，最大4096，除非用mysqld_safe打开限制
table_open_cache = 2048
#MySql 服务接收针对每个进程最大查询包大小
max_allowed_packet = 16M
#作用于SQL查询单笔处理使用的内存缓存，如果一笔操作的二进制数据超过了限定大小，将会在磁盘上开辟空间处理，一般设为 1-2M即可，默认1M
binlog_cache_size = 2M
#单个内存表的最大值限定
max_heap_table_size = 64M
#为每个线程分配的排序缓冲大小
sort_buffer_size = 8M
#join 连表操作的缓冲大小,根据实际业务来设置，默认8M
join_buffer_size = 32M
#操作多少个离开连接的线程的缓存
thread_cache_size = 8
#并发线程数量，默认为8，可适当增加到2倍以内。如果有多个CPU可以乘 上CPU的数量。双核CPU可以乘 上当前最核数再乘 上70%-85%
thread_concurrency = 16
#专用于具体SQL的缓存，如果提交的查询与几次中的某查询相同，并且在query缓存中存在，则直接返回缓存中的结果。
query_cache_size = 64M
#对应上一条设置，当查询的结果超过下面设置的大小时，将不会趣入到上面设置的缓存区中，避免了一个大的结果占据大量缓存。
query_cache_limit = 2M
#设置加全文检索中的最小单词长度。
#ft_min_word_len = 4
#CREATE TABLE 语句的默认表类型，如果不自己指定类型，则使用下行的类型
default-storage-engine = InnoDB
#线程堆栈大小，mysql说它自己用的堆栈大小不超过64K。这个值可适当设高一点（在RCA的项目中都是共用同一个数据库连接的），默认192K
thread_stack = 800K
#设置事务处理的级别,默认 REPEATABLE-READ，一般用它就即可，以下二行按顺序对应，
#可读写未提交的数据，创建未提交的数据副本读写，未提交之前可读不可写，只允许串行序列招行事务。
# READ-UNCOMMITTED, READ-COMMITTED, REPEATABLE-READ, SERIALIZABLE
transaction_isolation = REPEATABLE-READ
#单一内存临时表在内存中的大小，超过此值自动转换到磁盘操作
tmp_table_size = 64M
#启动二进制日志功能，可通过它实现时间点恢复最新的备份
#log-bin=mysql-bin
#二进制日志格式，对就上一条，-建议混合格式
#binlog_format=mixed
#转换查询为缓慢查询
slow_query_log
#对应上一条，如果一个查询超过了下条设定的时间则执行上一条。
long_query_time = 2
#自定义主机ID识别符，用于主从或多服务器之间识别，为 一个 int 类型
server-id = 1
#一般用来缓存MyISAM表的主键，也用于临时的磁盘表缓存主键，上面多次出现临时磁盘表，所以就算不用MyISAM也最好为其设置一个不小的值，默认32M
key_buffer_size = 56M
#全表扫描MyISAM表时的缓存，每个线程拥有下行的大小。
read_buffer_size = 2M
#排序操作时与磁盘之间的缓存，分到每个线程，默认16M
read_rnd_buffer_size = 16M
#MyISAM使用特殊树形进行批量插入时的缓存，如insert ... values(..)(..)(..)
bulk_insert_buffer_size = 64M
#MyISAM索引文件的最大限定，
myisam_max_sort_file_size = 12G
#如果一个myisam表有一个以上的索引， MyISAM可以使用一个以上线程来排序并行它们。较耗硬件资源，如果你的环境不错，可以增加此值。
myisam_repair_threads = 2
#自动检查和修复无法正确关闭MyISAM表。
myisam_recover
# *** INNODB Specific options ***
#开启下条将会禁用 INNODB
#skip-innodb
#一般不用设置或者说设了也没多大用，InnoDB会自己与操作系统交互管理其附加内存池所使用InnoDB的存储数据的大小
innodb_additional_mem_pool_size = 16M
#innodb整体缓冲池大小，不宜过大，设为本地内存的 50%-75% 比较合适,在本机开发过程中可以设得较小一点如 64M,256M
innodb_buffer_pool_size = 256M
#InnoDB的数据存储在一个或多个数据文件组成的表空间
innodb_data_file_path = ibdata1:10M:autoextend
#用于异步IO操作的线程数量，默认为 4 ，可适当提高
innodb_file_io_threads = 8
#线程数内允许的InnoDB内核,不宜太高
innodb_thread_concurrency = 14
#InnoDB的事务日志快存行为,默认为 1，为0可减轻磁盘I/0操作，还有以为2
innodb_flush_log_at_trx_commit = 1
#InnoDB的用于的缓冲日志数据的大小
innodb_log_buffer_size = 16M
#日志文件，可设置为25%-90%的总体缓存大小，默认 256M. 修改此项要先删除datadir\ib_logfileXXX
innodb_log_file_size = 256M
#日志组数量，默认为3
innodb_log_files_in_group = 3
#InnoDB的日志文件位置。默认是MySQL的datadir
#innodb_log_group_home_dir
#InnoDB最大允许的脏页缓冲池的百分比，默认90
innodb_max_dirty_pages_pct = 90
#事务死锁超时设定
innodb_lock_wait_timeout = 120
[client]
port = 3306
socket = /tmp/mysql.sock
# 设置mysql客户端的字符集
default-character-set=utf8
[mysqldump]
quick
max_allowed_packet = 16M
[mysql]
no-auto-rehash
# Only allow UPDATEs and DELETEs that use keys.
#safe-updates
[WinMySQLAdmin]
# 指定mysql服务启动启动的文件
Server=F:\\myweb\\MySql Server\\bin\\mysqld.exe