基于版本jdk1.7.0_80
java.util.HashSet
java.util.LinkedHashSet
代码如下
HashSet，312行
/*View Code
* Copyright (c) 1997, 2010, Oracle and/or its affiliates. All rights reserved.
* ORACLE PROPRIETARY/CONFIDENTIAL. Use is subject to license terms.
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*/
package java.util;
/**
* This class implements the <tt>Set</tt> interface, backed by a hash table
* (actually a <tt>HashMap</tt> instance). It makes no guarantees as to the
* iteration order of the set; in particular, it does not guarantee that the
* order will remain constant over time. This class permits the <tt>null</tt>
* element.
*
* <p>This class offers constant time performance for the basic operations
* (<tt>add</tt>, <tt>remove</tt>, <tt>contains</tt> and <tt>size</tt>),
* assuming the hash function disperses the elements properly among the
* buckets. Iterating over this set requires time proportional to the sum of
* the <tt>HashSet</tt> instance's size (the number of elements) plus the
* "capacity" of the backing <tt>HashMap</tt> instance (the number of
* buckets). Thus, it's very important not to set the initial capacity too
* high (or the load factor too low) if iteration performance is important.
*
* <p><strong>Note that this implementation is not synchronized.</strong>
* If multiple threads access a hash set concurrently, and at least one of
* the threads modifies the set, it <i>must</i> be synchronized externally.
* This is typically accomplished by synchronizing on some object that
* naturally encapsulates the set.
*
* If no such object exists, the set should be "wrapped" using the
* {@link Collections#synchronizedSet Collections.synchronizedSet}
* method. This is best done at creation time, to prevent accidental
* unsynchronized access to the set:<pre>
* Set s = Collections.synchronizedSet(new HashSet(...));</pre>
*
* <p>The iterators returned by this class's <tt>iterator</tt> method are
* <i>fail-fast</i>: if the set is modified at any time after the iterator is
* created, in any way except through the iterator's own <tt>remove</tt>
* method, the Iterator throws a {@link ConcurrentModificationException}.
* Thus, in the face of concurrent modification, the iterator fails quickly
* and cleanly, rather than risking arbitrary, non-deterministic behavior at
* an undetermined time in the future.
*
* <p>Note that the fail-fast behavior of an iterator cannot be guaranteed
* as it is, generally speaking, impossible to make any hard guarantees in the
* presence of unsynchronized concurrent modification. Fail-fast iterators
* throw <tt>ConcurrentModificationException</tt> on a best-effort basis.
* Therefore, it would be wrong to write a program that depended on this
* exception for its correctness: <i>the fail-fast behavior of iterators
* should be used only to detect bugs.</i>
*
* <p>This class is a member of the
* <a href="{@docRoot}/../technotes/guides/collections/index.html">
* Java Collections Framework</a>.
*
* @param <E> the type of elements maintained by this set
*
* @author Josh Bloch
* @author Neal Gafter
* @see Collection
* @see Set
* @see TreeSet
* @see HashMap
* @since 1.2
*/
public class HashSet<E>
extends AbstractSet<E>
implements Set<E>, Cloneable, java.io.Serializable
{
static final long serialVersionUID = -5024744406713321676L;
private transient HashMap<E,Object> map;
// Dummy value to associate with an Object in the backing Map
private static final Object PRESENT = new Object();
/**
* Constructs a new, empty set; the backing <tt>HashMap</tt> instance has
* default initial capacity (16) and load factor (0.75).
*/
public HashSet() {
map = new HashMap<>();
}
/**
* Constructs a new set containing the elements in the specified
* collection. The <tt>HashMap</tt> is created with default load factor
* (0.75) and an initial capacity sufficient to contain the elements in
* the specified collection.
*
* @param c the collection whose elements are to be placed into this set
* @throws NullPointerException if the specified collection is null
*/
public HashSet(Collection<? extends E> c) {
map = new HashMap<>(Math.max((int) (c.size()/.75f) + 1, 16));
addAll(c);
}
/**
* Constructs a new, empty set; the backing <tt>HashMap</tt> instance has
* the specified initial capacity and the specified load factor.
*
* @param initialCapacity the initial capacity of the hash map
* @param loadFactor the load factor of the hash map
* @throws IllegalArgumentException if the initial capacity is less
* than zero, or if the load factor is nonpositive
*/
public HashSet(int initialCapacity, float loadFactor) {
map = new HashMap<>(initialCapacity, loadFactor);
}
/**
* Constructs a new, empty set; the backing <tt>HashMap</tt> instance has
* the specified initial capacity and default load factor (0.75).
*
* @param initialCapacity the initial capacity of the hash table
* @throws IllegalArgumentException if the initial capacity is less
* than zero
*/
public HashSet(int initialCapacity) {
map = new HashMap<>(initialCapacity);
}
/**
* Constructs a new, empty linked hash set. (This package private
* constructor is only used by LinkedHashSet.) The backing
* HashMap instance is a LinkedHashMap with the specified initial
* capacity and the specified load factor.
*
* @param initialCapacity the initial capacity of the hash map
* @param loadFactor the load factor of the hash map
* @param dummy ignored (distinguishes this
* constructor from other int, float constructor.)
* @throws IllegalArgumentException if the initial capacity is less
* than zero, or if the load factor is nonpositive
*/
HashSet(int initialCapacity, float loadFactor, boolean dummy) {
map = new LinkedHashMap<>(initialCapacity, loadFactor);
}
/**
* Returns an iterator over the elements in this set. The elements
* are returned in no particular order.
*
* @return an Iterator over the elements in this set
* @see ConcurrentModificationException
*/
public Iterator<E> iterator() {
return map.keySet().iterator();
}
/**
* Returns the number of elements in this set (its cardinality).
*
* @return the number of elements in this set (its cardinality)
*/
public int size() {
return map.size();
}
/**
* Returns <tt>true</tt> if this set contains no elements.
*
* @return <tt>true</tt> if this set contains no elements
*/
public boolean isEmpty() {
return map.isEmpty();
}
/**
* Returns <tt>true</tt> if this set contains the specified element.
* More formally, returns <tt>true</tt> if and only if this set
* contains an element <tt>e</tt> such that
* <tt>(o==null ? e==null : o.equals(e))</tt>.
*
* @param o element whose presence in this set is to be tested
* @return <tt>true</tt> if this set contains the specified element
*/
public boolean contains(Object o) {
return map.containsKey(o);
}
/**
* Adds the specified element to this set if it is not already present.
* More formally, adds the specified element <tt>e</tt> to this set if
* this set contains no element <tt>e2</tt> such that
* <tt>(e==null ? e2==null : e.equals(e2))</tt>.
* If this set already contains the element, the call leaves the set
* unchanged and returns <tt>false</tt>.
*
* @param e element to be added to this set
* @return <tt>true</tt> if this set did not already contain the specified
* element
*/
public boolean add(E e) {
return map.put(e, PRESENT)==null;
}
/**
* Removes the specified element from this set if it is present.
* More formally, removes an element <tt>e</tt> such that
* <tt>(o==null ? e==null : o.equals(e))</tt>,
* if this set contains such an element. Returns <tt>true</tt> if
* this set contained the element (or equivalently, if this set
* changed as a result of the call). (This set will not contain the
* element once the call returns.)
*
* @param o object to be removed from this set, if present
* @return <tt>true</tt> if the set contained the specified element
*/
public boolean remove(Object o) {
return map.remove(o)==PRESENT;
}
/**
* Removes all of the elements from this set.
* The set will be empty after this call returns.
*/
public void clear() {
map.clear();
}
/**
* Returns a shallow copy of this <tt>HashSet</tt> instance: the elements
* themselves are not cloned.
*
* @return a shallow copy of this set
*/
public Object clone() {
try {
HashSet<E> newSet = (HashSet<E>) super.clone();
newSet.map = (HashMap<E, Object>) map.clone();
return newSet;
} catch (CloneNotSupportedException e) {
throw new InternalError();
}
}
/**
* Save the state of this <tt>HashSet</tt> instance to a stream (that is,
* serialize it).
*
* @serialData The capacity of the backing <tt>HashMap</tt> instance
* (int), and its load factor (float) are emitted, followed by
* the size of the set (the number of elements it contains)
* (int), followed by all of its elements (each an Object) in
* no particular order.
*/
private void writeObject(java.io.ObjectOutputStream s)
throws java.io.IOException {
// Write out any hidden serialization magic
s.defaultWriteObject();
// Write out HashMap capacity and load factor
s.writeInt(map.capacity());
s.writeFloat(map.loadFactor());
// Write out size
s.writeInt(map.size());
// Write out all elements in the proper order.
for (E e : map.keySet())
s.writeObject(e);
}
/**
* Reconstitute the <tt>HashSet</tt> instance from a stream (that is,
* deserialize it).
*/
private void readObject(java.io.ObjectInputStream s)
throws java.io.IOException, ClassNotFoundException {
// Read in any hidden serialization magic
s.defaultReadObject();
// Read in HashMap capacity and load factor and create backing HashMap
int capacity = s.readInt();
float loadFactor = s.readFloat();
map = (((HashSet)this) instanceof LinkedHashSet ?
new LinkedHashMap<E,Object>(capacity, loadFactor) :
new HashMap<E,Object>(capacity, loadFactor));
// Read in size
int size = s.readInt();
// Read in all elements in the proper order.
for (int i=0; i<size; i++) {
E e = (E) s.readObject();
map.put(e, PRESENT);
}
}
}
LinkedHashSet，171行
/*View Code
* Copyright (c) 2000, 2006, Oracle and/or its affiliates. All rights reserved.
* ORACLE PROPRIETARY/CONFIDENTIAL. Use is subject to license terms.
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*/
package java.util;
/**
* <p>Hash table and linked list implementation of the <tt>Set</tt> interface,
* with predictable iteration order. This implementation differs from
* <tt>HashSet</tt> in that it maintains a doubly-linked list running through
* all of its entries. This linked list defines the iteration ordering,
* which is the order in which elements were inserted into the set
* (<i>insertion-order</i>). Note that insertion order is <i>not</i> affected
* if an element is <i>re-inserted</i> into the set. (An element <tt>e</tt>
* is reinserted into a set <tt>s</tt> if <tt>s.add(e)</tt> is invoked when
* <tt>s.contains(e)</tt> would return <tt>true</tt> immediately prior to
* the invocation.)
*
* <p>This implementation spares its clients from the unspecified, generally
* chaotic ordering provided by {@link HashSet}, without incurring the
* increased cost associated with {@link TreeSet}. It can be used to
* produce a copy of a set that has the same order as the original, regardless
* of the original set's implementation:
* <pre>
* void foo(Set s) {
* Set copy = new LinkedHashSet(s);
* ...
* }
* </pre>
* This technique is particularly useful if a module takes a set on input,
* copies it, and later returns results whose order is determined by that of
* the copy. (Clients generally appreciate having things returned in the same
* order they were presented.)
*
* <p>This class provides all of the optional <tt>Set</tt> operations, and
* permits null elements. Like <tt>HashSet</tt>, it provides constant-time
* performance for the basic operations (<tt>add</tt>, <tt>contains</tt> and
* <tt>remove</tt>), assuming the hash function disperses elements
* properly among the buckets. Performance is likely to be just slightly
* below that of <tt>HashSet</tt>, due to the added expense of maintaining the
* linked list, with one exception: Iteration over a <tt>LinkedHashSet</tt>
* requires time proportional to the <i>size</i> of the set, regardless of
* its capacity. Iteration over a <tt>HashSet</tt> is likely to be more
* expensive, requiring time proportional to its <i>capacity</i>.
*
* <p>A linked hash set has two parameters that affect its performance:
* <i>initial capacity</i> and <i>load factor</i>. They are defined precisely
* as for <tt>HashSet</tt>. Note, however, that the penalty for choosing an
* excessively high value for initial capacity is less severe for this class
* than for <tt>HashSet</tt>, as iteration times for this class are unaffected
* by capacity.
*
* <p><strong>Note that this implementation is not synchronized.</strong>
* If multiple threads access a linked hash set concurrently, and at least
* one of the threads modifies the set, it <em>must</em> be synchronized
* externally. This is typically accomplished by synchronizing on some
* object that naturally encapsulates the set.
*
* If no such object exists, the set should be "wrapped" using the
* {@link Collections#synchronizedSet Collections.synchronizedSet}
* method. This is best done at creation time, to prevent accidental
* unsynchronized access to the set: <pre>
* Set s = Collections.synchronizedSet(new LinkedHashSet(...));</pre>
*
* <p>The iterators returned by this class's <tt>iterator</tt> method are
* <em>fail-fast</em>: if the set is modified at any time after the iterator
* is created, in any way except through the iterator's own <tt>remove</tt>
* method, the iterator will throw a {@link ConcurrentModificationException}.
* Thus, in the face of concurrent modification, the iterator fails quickly
* and cleanly, rather than risking arbitrary, non-deterministic behavior at
* an undetermined time in the future.
*
* <p>Note that the fail-fast behavior of an iterator cannot be guaranteed
* as it is, generally speaking, impossible to make any hard guarantees in the
* presence of unsynchronized concurrent modification. Fail-fast iterators
* throw <tt>ConcurrentModificationException</tt> on a best-effort basis.
* Therefore, it would be wrong to write a program that depended on this
* exception for its correctness: <i>the fail-fast behavior of iterators
* should be used only to detect bugs.</i>
*
* <p>This class is a member of the
* <a href="{@docRoot}/../technotes/guides/collections/index.html">
* Java Collections Framework</a>.
*
* @param <E> the type of elements maintained by this set
*
* @author Josh Bloch
* @see Object#hashCode()
* @see Collection
* @see Set
* @see HashSet
* @see TreeSet
* @see Hashtable
* @since 1.4
*/
public class LinkedHashSet<E>
extends HashSet<E>
implements Set<E>, Cloneable, java.io.Serializable {
private static final long serialVersionUID = -2851667679971038690L;
/**
* Constructs a new, empty linked hash set with the specified initial
* capacity and load factor.
*
* @param initialCapacity the initial capacity of the linked hash set
* @param loadFactor the load factor of the linked hash set
* @throws IllegalArgumentException if the initial capacity is less
* than zero, or if the load factor is nonpositive
*/
public LinkedHashSet(int initialCapacity, float loadFactor) {
super(initialCapacity, loadFactor, true);
}
/**
* Constructs a new, empty linked hash set with the specified initial
* capacity and the default load factor (0.75).
*
* @param initialCapacity the initial capacity of the LinkedHashSet
* @throws IllegalArgumentException if the initial capacity is less
* than zero
*/
public LinkedHashSet(int initialCapacity) {
super(initialCapacity, .75f, true);
}
/**
* Constructs a new, empty linked hash set with the default initial
* capacity (16) and load factor (0.75).
*/
public LinkedHashSet() {
super(16, .75f, true);
}
/**
* Constructs a new linked hash set with the same elements as the
* specified collection. The linked hash set is created with an initial
* capacity sufficient to hold the elements in the specified collection
* and the default load factor (0.75).
*
* @param c the collection whose elements are to be placed into
* this set
* @throws NullPointerException if the specified collection is null
*/
public LinkedHashSet(Collection<? extends E> c) {
super(Math.max(2*c.size(), 11), .75f, true);
addAll(c);
}
}
这两个类都很简单，于是合在一起讲了
HashSet
1. 接口分析
继承于AbstractSet抽象类
Set，Cloneable，java.io.Serializable接口
2. 实现原理
内置了一个HashMap，任何操作都是将传入的key与一个dummy对象组成一对，然后对这个内置的HashMap操作
随意列举几个关键方法如下
public int size() {
return map.size();
}
public boolean contains(Object o) {
return map.containsKey(o);
}
public boolean add(E e) {
return map.put(e, PRESENT)==null;
}
public boolean remove(Object o) {
return map.remove(o)==PRESENT;
}
3. 对LinkedHashSet的支持
HashSet有一个friendly访问权限的构造方法，其中创建了LinkedHashMap用来存储对象
这个构造方法只有LinkedHashSet会调用
4. 迭代器
返回的迭代器是内置map的keyset的迭代器
public Iterator<E> iterator() {
return map.keySet().iterator();
}
LinkedHashSet
1. 接口分析
继承于HashSet类
Set，Cloneable，java.io.Serializable接口
2. 实现原理
全部调用父类HashSet的方法
父类HashSet再利用内部集成的LinkedHashMap来实现按元素的最后访问次序来迭代遍历