备份与还原是数据库避不开的主题，而作为DBA，经常会面临将一台机器上的所有数据库重新构建到一台新机器上的要求；
在现在都讲究自动化管理的时代，传统的界面操作备份还原的做法不仅浪费时间和精力，而且还很容易出错，并且这次完成后，
下次再有这样的要求，必须又重头开始（估计做5次就能做得人狂吐）；于是，我们需要一套应对这种频繁操作、耗时、耗精力
的通用处理方法，所以以下批处理脚本就诞生了。
脚本主要的功能：
1. 备份一个服务器上的所有数据库（当然你也可以选择），备份文件按数据库名+日期生成，以.bak 结尾；
2. 将所有的备份文件还原到一台新机器上；
3. 验证磁盘和路径的正确性；
说明：
脚本合适 SQLServer 2005 & 2008 版本；
批量备份数据库：
-----------------------------批量备份数据-------------------------------------------
Use master
GO
/*=================Usp_BackUp_DataBase========================
=====BackUp Sigle DataBase ======
=====Ken.Guo ======
=====2010.9.10 ======
=====Version: 2005 & 2008 SQL Server ======
=====EXEC Usp_BackUp_DataBase 'MyDB','D:\BackUp' ======
============================================================
*/
CREATE PROC [dbo].[Usp_BackUp_DataBase] @DatabaseName nvarchar(200),@Path nvarchar(200)
AS
BEGIN
DECLARE @fn varchar(200)
,@sql varchar(1000)
SET @fn = @Path +(case when right(@Path,1) <>'\' then '\' else '' end)
+@DatabaseName+'_'
+convert(char(8),getdate(),112)+'_'
+replace(convert(char(8),getdate(),108),':','')
+'.bak'
set @sql = 'backup database '+@DatabaseName + ' to disk = N''' + @fn + ''''
--SELECT @sql
EXEC(@sql)
END
GO
Use master
GO
/*=============BackUp Mutile DataBase=========================*/
DECLARE @dbname nvarchar(200)
,@backup_path nvarchar(200)
SET @backup_path='D:\BackUp\'
DECLARE db_info CURSOR
LOCAL
STATIC
READ_ONLY
FORWARD_ONLY
FOR --根据查询，添加其他筛选条件
SELECT
name
FROM master.sys.databases WITH(NOLOCK)
WHERE
database_id>4
OPEN db_info
FETCH NEXT FROM db_info INTO @dbname
WHILE @@FETCH_STATUS=0
begin
EXEC master.dbo.Usp_BackUp_DataBase @dbname,@backup_path
FETCH NEXT FROM db_info INTO @dbname
END
close db_info
deallocate db_info
---------------------------------BackUp DataBase End------------------------------------
检查还原磁盘：
Use master
GO
/*=================Check Restore Path Drives Exists==========================
=====Ken.Guo ======
=====2010.9.10 ======
=====EXEC Usp_Check_DriveExists @RestoreDataPath,@ResultCount OUTPUT ======
===========================================================================
*/
CREATE PROC Usp_Check_DriveExists(
@RestoreDataPath nvarchar(200)
,@ResultCount int OUTPUT)
AS
BEGIN
--Check Restore Path and Size >1000M
if CHARINDEX(':',@RestoreDataPath)>0
begin
DECLARE @Drive nvarchar(10)
,@errorinfo nvarchar(500)
DECLARE @DriveList TABLE
(
Drive nvarchar(10)
,DSize bigint
)
INSERT INTO @DriveList
EXEC master.dbo.xp_fixeddrives
SET @Drive=Left(@RestoreDataPath,CHARINDEX(':',@RestoreDataPath)-1)
if not exists(SELECT
*
FROM @DriveList
WHERE
Drive=@Drive
AND DSize>1024
)
begin
set @errorinfo=N'找不到还原磁盘:'+@Drive+N' ，或者磁盘剩余空间小于1G'
RAISERROR 50001 @errorinfo
set @ResultCount=0
return
end
end
else if(LEN(@RestoreDataPath)>1) AND CHARINDEX(':',@RestoreDataPath)=0
begin
set @errorinfo=N'还原路径错误:'+@RestoreDataPath+N'，必须包含":" 号'
Raiserror 50001 @errorinfo
set @ResultCount= 0
return
end
set @ResultCount= 1
end
GO
还原单个数据库：
Use master
GO
/*=================Usp_RestoreDataBaseFormPath=======================================
=====Restore Single DataBase From a Back File ======
=====Ken.Guo ======
=====2010.9.10 ======
=====Version: 2005 & 2008 SQL Server ======
=====Usp_RestoreDataBaseFormPath 'D:\databack\dbcenter.bak','D:\Data',0 ======
=====Key Point Info: ======
--Restore HeaderOnly from disk='D:\data\xx.bak'
--Restore FileListOnly from disk='D:\data\xx.bak'
===================================================================================
*/
CREATE PROC Usp_RestoreDataBaseFormPath
(@DatabBaseBakPath nvarchar(400),
@RestoreDataPath nvarchar(400)='', --RESTORE DATABASE PATH
@IsRun smallint=0 -- 0 PRINT 1 run
)
AS
BEGIN
set nocount on
declare @dbname nvarchar(200),@SQL nvarchar(4000),@DirSQL nvarchar(1000),@errorinfo nvarchar(300)
--add path \
if (@RestoreDataPath is not null) and len(@RestoreDataPath)>1
and (right(@RestoreDataPath,1)<>'\')
set @RestoreDataPath=@RestoreDataPath+'\'
declare @checkdrive int
set @checkdrive=1
exec master.dbo.Usp_Check_DriveExists @RestoreDataPath,@checkdrive output
if(@checkdrive<>1)
Goto ExitFLag
DECLARE @BakFileList TABLE
( LogicalName nvarchar(128)
,PhysicalName nvarchar(260)
)
DECLARE @BakHeaderInfo TABLE
(
DatabaseName nvarchar(128)
)
if Charindex('Microsoft SQL Server 2008',@@VERSION)>0
begin
--SQL Server 2008
DECLARE @BakFileList2008 TABLE
( LogicalName nvarchar(128)
,PhysicalName nvarchar(260)
,Type char(1)
,FileGroupName nvarchar(128)
,SIZE numeric(20,0)
,MaxSize numeric(20,0)
,FileID bigint
,CreateLSN numeric(25,0)
,DropLSN numeric(25,0) NULL
,UniqueID uniqueidentifier
,ReadOnlyLSN numeric(25,0) NULL
,ReadWriteLSN numeric(25,0) NULL
,BackupSizeInBytes bigint
,SourceBlockSize int
,FileGroupID int
,LogGroupGUID uniqueidentifier NULL
,DifferentialBaseLSN numeric(25,0) NULL
,DifferentialBaseGUID uniqueidentifier
,IsReadOnly bit
,IsPresent bit
,TDEThumbprint varbinary(32)
)
INSERT INTO @BakFileList2008
EXEC sp_executesql N'Restore FileListOnly From Disk=@DatabBaseBakPath',N'@DatabBaseBakPath nvarchar(260)',@DatabBaseBakPath
DECLARE @BakHeaderInfo2008 TABLE
(
BackupName nvarchar(128)
,BackupDescription nvarchar(255)
,BackupType smallint
,ExpirationDate datetime
,Compressed tinyint
,POSITION smallint
,DeviceType tinyint
,UserName nvarchar(128)
,ServerName nvarchar(128)
,DatabaseName nvarchar(128)
,DatabaseVersion int
,DatabaseCreationDate datetime
,BackupSize numeric(20,0)
,FirstLSN numeric(25,0)
,LastLSN numeric(25,0)
,CheckpointLSN numeric(25,0)
,DatabaseBackupLSN numeric(25,0)
,BackupStartDate datetime
,BackupFinishDate datetime
,SortOrder smallint
,CodePage smallint
,UnicodeLocaleId int
,UnicodeComparisonStyle int
,CompatibilityLevel tinyint
,SoftwareVendorId int
,SoftwareVersionMajor int
,SoftwareVersionMinor int
,SoftwareVersionBuild int
,MachineName nvarchar(128)
,Flags int
,BindingID uniqueidentifier
,RecoveryForkID uniqueidentifier
,COLLATION nvarchar(128)
,FamilyGUID uniqueidentifier
,HasBulkLoggedData bit
,IsSnapshot bit
,IsReadOnly bit
,IsSingleUser bit
,HasBackupChecksums bit
,IsDamaged bit
,BeginsLogChain bit
,HasIncompleteMetaData bit
,IsForceOffline bit
,IsCopyOnly bit
,FirstRecoveryForkID uniqueidentifier
,ForkPointLSN numeric(25,0) NULL
,RecoveryModel nvarchar(60)
,DifferentialBaseLSN numeric(25,0) NULL
,DifferentialBaseGUID uniqueidentifier
,BackupTypeDescription nvarchar(60)
,BackupSetGUID uniqueidentifier NULL
,CompressedBackupSize numeric(20,0)
)
INSERT INTO @BakHeaderInfo2008
EXEC sp_executesql N'Restore HeaderOnly From Disk=@DatabBaseBakPath',N'@DatabBaseBakPath nvarchar(260)',@DatabBaseBakPath
insert into @BakHeaderInfo(DatabaseName)
select DatabaseName from @BakHeaderInfo2008
insert into @BakFileList(LogicalName ,PhysicalName)
select LogicalName ,PhysicalName from @BakFileList2008
end
else
begin
--SQL Server 2005
DECLARE @BakFileList2005 TABLE
(
LogicalName nvarchar(128)
,PhysicalName nvarchar(260)
,Type char(1)
,FileGroupName nvarchar(128)
,SIZE numeric(20,0)
,MaxSize numeric(20,0)
,FileID bigint
,CreateLSN numeric(25,0)
,DropLSN numeric(25,0) NULL
,UniqueID uniqueidentifier
,ReadOnlyLSN numeric(25,0) NULL
,ReadWriteLSN numeric(25,0) NULL
,BackupSizeInBytes bigint
,SourceBlockSize int
,FileGroupID int
,LogGroupGUID uniqueidentifier NULL
,DifferentialBaseLSN numeric(25,0) NULL
,DifferentialBaseGUID uniqueidentifier
,IsReadOnly bit
,IsPresent bit
)
INSERT INTO @BakFileList2005
EXEC sp_executesql N'Restore FileListOnly From Disk=@DatabBaseBakPath',N'@DatabBaseBakPath nvarchar(260)',@DatabBaseBakPath
DECLARE @BakHeaderInfo2005 TABLE
(
BackupName nvarchar(128)
,BackupDescription nvarchar(255)
,BackupType smallint
,ExpirationDate datetime
,Compressed tinyint
,POSITION smallint
,DeviceType tinyint
,UserName nvarchar(128)
,ServerName nvarchar(128)
,DatabaseName nvarchar(128)
,DatabaseVersion int
,DatabaseCreationDate datetime
,BackupSize numeric(20,0)
,FirstLSN numeric(25,0)
,LastLSN numeric(25,0)
,CheckpointLSN numeric(25,0)
,DatabaseBackupLSN numeric(25,0)
,BackupStartDate datetime
,BackupFinishDate datetime
,SortOrder smallint
,CodePage smallint
,UnicodeLocaleId int
,UnicodeComparisonStyle int
,CompatibilityLevel tinyint
,SoftwareVendorId int
,SoftwareVersionMajor int
,SoftwareVersionMinor int
,SoftwareVersionBuild int
,MachineName nvarchar(128)
,Flags int
,BindingID uniqueidentifier
,RecoveryForkID uniqueidentifier
,COLLATION nvarchar(128)
,FamilyGUID uniqueidentifier
,HasBulkLoggedData bit
,IsSnapshot bit
,IsReadOnly bit
,IsSingleUser bit
,HasBackupChecksums bit
,IsDamaged bit
,BeginsLogChain bit
,HasIncompleteMetaData bit
,IsForceOffline bit
,IsCopyOnly bit
,FirstRecoveryForkID uniqueidentifier
,ForkPointLSN numeric(25,0) NULL
,RecoveryModel nvarchar(60)
,DifferentialBaseLSN numeric(25,0) NULL
,DifferentialBaseGUID uniqueidentifier
,BackupTypeDescription nvarchar(60)
,BackupSetGUID uniqueidentifier NULL
)
INSERT INTO @BakHeaderInfo2005
EXEC sp_executesql N'Restore HeaderOnly From Disk=@DatabBaseBakPath',N'@DatabBaseBakPath nvarchar(260)',@DatabBaseBakPath
insert into @BakHeaderInfo(DatabaseName)
select DatabaseName from @BakHeaderInfo2005
insert into @BakFileList(LogicalName ,PhysicalName)
select LogicalName ,PhysicalName from @BakFileList2005
end
--Check back file info
if not exists (select 1 from @BakFileList) OR not exists (select 1 from @BakHeaderInfo)
begin
set @errorinfo=N'取不到备份文件:'+@DatabBaseBakPath+N' 的信息，请检查备份文件是否正确或者版本是否兼容'
Raiserror 50001 @errorinfo
Goto ExitFLag
end
--Get DataBase Name
SELECT TOP 1 @dbname=databasename FROM @BakHeaderInfo
if exists (select 1 from master.sys.databases with(nolock) where name=@dbname)
begin
set @errorinfo=N'数据库：'+@dbname+N'已经存在，不能还原'
Raiserror 50001 @errorinfo
Goto ExitFLag
end
DECLARE @LogicalName nvarchar(200),@PhysicalName nvarchar(400)
,@pos int ,@endpos int,@LastPhysicalName nvarchar(400)
DECLARE db_file CURSOR
LOCAL
READ_ONLY
FORWARD_ONLY
STATIC
FOR
SELECT
LogicalName
,PhysicalName
FROM @BakFileList
OPEN db_file
set @DirSQL=''
set @SQL=+N'RESTORE DATABASE '+QUOTENAME(@dbname)+' from disk=N'''+@DatabBaseBakPath+''''
set @SQL=@SQL+char(13)+Char(10)+N' WITH FILE=1 '
FETCH NEXT FROM db_file INTO @LogicalName,@PhysicalName
WHILE @@FETCH_STATUS=0
begin
---Get DB PhysicalName
set @endpos=0
while CHARINDEX('\',@PhysicalName)>0
begin
set @pos=CHARINDEX('\',@PhysicalName,@endpos)
if(@pos=0)
break;
set @endpos=@pos+1;
end
--create new db path
if(len(@RestoreDataPath)>1)
begin
set @PhysicalName=@RestoreDataPath+@dbname+'\'+SUBSTRING(@PhysicalName,@endpos,LEN(@PhysicalName)-@endpos+1)
set @DirSQL=N'EXEC master.sys.xp_create_subdir N'''+@RestoreDataPath+@dbname+''''
END
else
begin
if len(@DirSQL)<1 OR (SUBSTRING(@PhysicalName,1,@endpos-1)<>@LastPhysicalName)
if(len(@DirSQL)<1)
set @DirSQL=N'EXEC master.sys.xp_create_subdir N'''+SUBSTRING(@PhysicalName,1,@endpos-1)+''''
else
set @DirSQL=@DirSQL+char(13)+N'EXEC master.sys.xp_create_subdir N'''+SUBSTRING(@PhysicalName,1,@endpos-1)+''''
---Check Drives
set @checkdrive=1
exec master.dbo.Usp_Check_DriveExists @PhysicalName,@checkdrive output
if(@checkdrive<>1)
Goto ExitFLag
set @LastPhysicalName=SUBSTRING(@PhysicalName,1,@endpos-1);
END
set @SQL=@SQL+char(13)+Char(10)+N' ,Move N'''+@LogicalName+''''+' TO N'''+@PhysicalName+''''
FETCH NEXT FROM db_file INTO @LogicalName,@PhysicalName
end
set @SQL=@SQL+char(13)+Char(10)+N' ,NOUNLOAD,Recovery,STATS = 10'
if(@IsRun=0)
print( @DirSQL+char(13)+char(10)+'GO'+char(13)+Char(10)+@SQL+char(13))
else
begin
print('-----------Begin Restore Database:'+@dbname+'------------------')
exec(@DirSQL)
exec(@SQL)
print('-----------End Restore Database:'+@dbname+'---------------------'+char(13))
end
close db_file
deallocate db_file
ExitFLag:
set nocount off
end
批量还原数据库：
Use master
GO
/*=================Usp_RestoreMuiteDataBaseFromPath========================
=====Restore Mutite DataBase File From a Path ======
=====Ken.Guo ======
=====2010.9.10 ======
=====Version: 2005 & 2008 SQL Server ======
=====EXEC Usp_RestoreMuiteDataBaseFromPath 'D:\databack','',0 ======
=========================================================================
*/
CREATE PROC Usp_RestoreMuiteDataBaseFromPath
( @DatabBaseBakPath nvarchar(400)
,@RestoreDataPath nvarchar(400)='' --RESTORE DATABASE PATH
,@IsRun smallint=0 -- 0 PRINT 1 run
)
AS
BEGIN
set nocount on
DECLARE @BackUpFileName nvarchar(200)
,@DbName nvarchar(200)
,@errorinfo nvarchar(400)
IF not exists(SELECT 1
FROM master.sys.procedures WITH(NOLOCK)
WHERE
name=N'Usp_RestoreDataBaseFormPath'
)
begin
Raiserror 50001 N'找不到存储过程SP_RestoreDataBaseFormPath '
Goto ExitFLag
end
--add path \
if (@DatabBaseBakPath is not null) and len(@DatabBaseBakPath)>1
and (right(@DatabBaseBakPath,1)<>'\')
set @DatabBaseBakPath=@DatabBaseBakPath+'\'
--Check Restore Path and Size >1000M
DECLARE @checkdrive int
SET @checkdrive=1
EXEC master.dbo.Usp_Check_DriveExists @RestoreDataPath,@checkdrive OUTPUT
IF(@checkdrive<>1)
Goto ExitFLag
DECLARE @Dir TABLE
(
BackDBFileName nvarchar(100)
,DEPTH int
,[File] int
)
INSERT INTO @Dir EXEC xp_dirtree @DatabBaseBakPath
,1
,1
DELETE FROM @Dir
WHERE charindex('.bak',BackDBFileName)=0
if not exists (select top 1 1 from @Dir)
begin
Raiserror 50001 N'在提供的路径下没有找到合符要求的备份文件'
Goto ExitFLag
end
declare db_file Cursor Local Static Read_Only Forward_Only
for
select BackDBFileName from @Dir
Open db_file
Fetch Next from db_file into @BackUpFileName
while @@FETCH_STATUS=0
begin
--Restore DataBase
set @BackUpFileName=@DatabBaseBakPath+@BackUpFileName
exec master.dbo.Usp_RestoreDataBaseFormPath @BackUpFileName,@RestoreDataPath,@IsRun
Fetch Next from db_file into @BackUpFileName
end
Close db_file
deallocate db_file
ExitFLag:
set nocount off
end