在Informix中将DATETIME转换为Unix Epoch

时间:2021-10-16 11:25:06

I have a DATETIME column:

我有一个DATETIME专栏:

SELECT mytime FROM mytable;

选择mytime FROM mytable;

mytime
--------------------
1/6/2013 10:41:41 PM

I would like to write a SQL statement that returns the time in Unix Time format (seconds since Unix Epoch - 01/01/1970 00:00:00) as INTEGER. I have tried to use DATEDIFF and CAST but no luck. This is Informix database.

我想编写一个SQL语句,以Unix时间格式(自Unix Epoch - 01/01/1970 00:00:00以来的秒数)返回INTEGER的时间。我曾试图使用DATEDIFF和CAST,但没有运气。这是Informix数据库。

2 个解决方案

#1


2  

Assuming that the mytime column is a DATETIME YEAR TO SECOND column (despite the formatting shown in the question), then the following stored procedure does the job. It has more comment than procedure, but the comments explain what it is doing.

假设mytime列是DATETIME YEAR TO SECOND列(尽管问题中显示了格式),则以下存储过程完成该任务。它的评论多于程序,但评论解释了它的作用。

{
#   "@(#)$Id: tounixtime.spl,v 1.6 2002/09/25 18:10:48 jleffler Exp $"
#
# Stored procedure TO_UNIX_TIME written by Jonathan Leffler (previously
# jleffler@informix.com and now jleffler@us.ibm.com).  Includes fix for
# bug reported by Tsutomu Ogiwara <Tsutomu.Ogiwara@ctc-g.co.jp> on
# 2001-07-13.  Previous version used DATETIME(0) SECOND TO SECOND
# instead of DATETIME(0:0:0) HOUR TO SECOND, and when the calculation
# extended the shorter constant to DATETIME HOUR TO SECOND, it added the
# current hour and minute fields, as documented in the Informix Guide to
# SQL: Syntax manual under EXTEND in the section on 'Expression'.
# Amended 2002-08-23 to handle 'eternity' and annotated more thoroughly.
# Amended 2002-09-25 to handle fractional seconds, as companion to the
# new stored procedure FROM_UNIX_TIME().
#
# If you run this procedure with no arguments (use the default), you
# need to worry about the time zone the database server is using because
# the value of CURRENT is determined by that, and you need to compensate
# for it if you are using a different time zone.
#
# Note that this version works for dates after 2001-09-09 when the
# interval between 1970-01-01 00:00:00+00:00 and current exceeds the
# range of INTERVAL SECOND(9) TO SECOND.  Returning DECIMAL(18,5) allows
# it to work for all valid datetime values including fractional seconds.
# In the UTC time zone, the 'Unix time' of 9999-12-31 23:59:59 is
# 253402300799 (12 digits); the equivalent for 0001-01-01 00:00:00 is
# -62135596800 (11 digits).  Both these values are unrepresentable in
# 32-bit integers, of course, so most Unix systems won't handle this
# range, and the so-called 'Proleptic Gregorian Calendar' used to
# calculate the dates ignores locale-dependent details such as the loss
# of days that occurred during the switch between the Julian and
# Gregorian calendar, but those are minutiae that most people can ignore
# most of the time.
}

CREATE PROCEDURE to_unix_time(d DATETIME YEAR TO FRACTION(5)
                                DEFAULT CURRENT YEAR TO FRACTION(5))
            RETURNING DECIMAL(18,5);
    DEFINE n DECIMAL(18,5);
    DEFINE i1 INTERVAL DAY(9) TO DAY;
    DEFINE i2 INTERVAL SECOND(6) TO FRACTION(5);
    DEFINE s1 CHAR(15);
    DEFINE s2 CHAR(15);
    LET i1 = EXTEND(d, YEAR TO DAY) - DATETIME(1970-01-01) YEAR TO DAY;
    LET s1 = i1;
    LET i2 = EXTEND(d, HOUR TO FRACTION(5)) -
                DATETIME(00:00:00.00000) HOUR TO FRACTION(5);
    LET s2 = i2;
    LET n = s1 * (24 * 60 * 60) + s2;
    RETURN n;
END PROCEDURE;

#2


1  

Function dbinfo('utc_current') returns epoch time ( number of seconds since 1917-01-01 00:00:00 )

函数dbinfo('utc_current')返回纪元时间(自1917-01-01 00:00:00以来的秒数)

#1


2  

Assuming that the mytime column is a DATETIME YEAR TO SECOND column (despite the formatting shown in the question), then the following stored procedure does the job. It has more comment than procedure, but the comments explain what it is doing.

假设mytime列是DATETIME YEAR TO SECOND列(尽管问题中显示了格式),则以下存储过程完成该任务。它的评论多于程序,但评论解释了它的作用。

{
#   "@(#)$Id: tounixtime.spl,v 1.6 2002/09/25 18:10:48 jleffler Exp $"
#
# Stored procedure TO_UNIX_TIME written by Jonathan Leffler (previously
# jleffler@informix.com and now jleffler@us.ibm.com).  Includes fix for
# bug reported by Tsutomu Ogiwara <Tsutomu.Ogiwara@ctc-g.co.jp> on
# 2001-07-13.  Previous version used DATETIME(0) SECOND TO SECOND
# instead of DATETIME(0:0:0) HOUR TO SECOND, and when the calculation
# extended the shorter constant to DATETIME HOUR TO SECOND, it added the
# current hour and minute fields, as documented in the Informix Guide to
# SQL: Syntax manual under EXTEND in the section on 'Expression'.
# Amended 2002-08-23 to handle 'eternity' and annotated more thoroughly.
# Amended 2002-09-25 to handle fractional seconds, as companion to the
# new stored procedure FROM_UNIX_TIME().
#
# If you run this procedure with no arguments (use the default), you
# need to worry about the time zone the database server is using because
# the value of CURRENT is determined by that, and you need to compensate
# for it if you are using a different time zone.
#
# Note that this version works for dates after 2001-09-09 when the
# interval between 1970-01-01 00:00:00+00:00 and current exceeds the
# range of INTERVAL SECOND(9) TO SECOND.  Returning DECIMAL(18,5) allows
# it to work for all valid datetime values including fractional seconds.
# In the UTC time zone, the 'Unix time' of 9999-12-31 23:59:59 is
# 253402300799 (12 digits); the equivalent for 0001-01-01 00:00:00 is
# -62135596800 (11 digits).  Both these values are unrepresentable in
# 32-bit integers, of course, so most Unix systems won't handle this
# range, and the so-called 'Proleptic Gregorian Calendar' used to
# calculate the dates ignores locale-dependent details such as the loss
# of days that occurred during the switch between the Julian and
# Gregorian calendar, but those are minutiae that most people can ignore
# most of the time.
}

CREATE PROCEDURE to_unix_time(d DATETIME YEAR TO FRACTION(5)
                                DEFAULT CURRENT YEAR TO FRACTION(5))
            RETURNING DECIMAL(18,5);
    DEFINE n DECIMAL(18,5);
    DEFINE i1 INTERVAL DAY(9) TO DAY;
    DEFINE i2 INTERVAL SECOND(6) TO FRACTION(5);
    DEFINE s1 CHAR(15);
    DEFINE s2 CHAR(15);
    LET i1 = EXTEND(d, YEAR TO DAY) - DATETIME(1970-01-01) YEAR TO DAY;
    LET s1 = i1;
    LET i2 = EXTEND(d, HOUR TO FRACTION(5)) -
                DATETIME(00:00:00.00000) HOUR TO FRACTION(5);
    LET s2 = i2;
    LET n = s1 * (24 * 60 * 60) + s2;
    RETURN n;
END PROCEDURE;

#2


1  

Function dbinfo('utc_current') returns epoch time ( number of seconds since 1917-01-01 00:00:00 )

函数dbinfo('utc_current')返回纪元时间(自1917-01-01 00:00:00以来的秒数)