一、本地实验环境准备
- 服务器虚拟机准备
| IP | CPU | 内存 | hostname |
|---|---|---|---|
| 192.168.222.129 | >=2c | >=2G | master |
| 192.168.222.130 | >=2c | >=2G | node1 |
| 192.168.222.131 | >=2c | >=2G | node2 |
本实验我这里用的虚拟机是vmware workstation创建的，我的机器配置较低，所以master给了4G 4C，node每个给了4G 4C，大家根据自己的资源情况，按照上面给的建议最低值创建即可。
注意：hostname不能有大写字母，比如Master这样的。
1. 软件版本
系统：CentOS7.5.1804
Kubernetes：1.15.3
docker-ce版本：19.03.1
2. 环境初始化操作
2.1 配置hostname
## 192.168.222.129
hostnamectl set-hostname master
## 192.168.222.130
hostnamectl set-hostname node1
## 192.168.222.131
hostnamectl set-hostname node2
2.2 配置三台虚拟机的/etc/hosts
echo "192.168.222.129 master" >> /etc/hosts
echo "192.168.222.130 node1" >> /etc/hosts
echo "192.168.222.131 node2" >> /etc/hosts
2.3 安装必要软件以及升级所有软件,关闭防火墙、selinux、swap
yum -y install vim-enhanced wget curl net-tools conntrack-tools bind-utils socat ipvsadm ipset
yum -y update
## 停防火墙
systemctl stop firewalld systemctl disable firewalld
## 关闭Selinux
sed -i 's#SELINUX=enforcing#SELINUX=disabled#g' /etc/sysconfig/selinux
sed -i 's#SELINUX=enforcing#SELINUX=disabled#g' /etc/selinux/config
## 关闭不必要服务
systemctl disable auditd
systemctl disable postfix
systemctl disable irqbalance
systemctl disable remote-fs
systemctl disable tuned
systemctl disable rhel-configure
systemctl disable firewalld
## 安装kernel-lt(kernel 4.4.178)
rpm --import https://www.elrepo.org/RPM-GPG-KEY-elrepo.org
yum -y install https://www.elrepo.org/elrepo-release-7.0-3.el7.elrepo.noarch.rpm
yum --enablerepo=elrepo-kernel install kernel-lt -y
grub2-set-default 0
grub2-mkconfig -o /etc/grub2.cfg
## 优化内核
cat >>/etc/sysctl.conf <<EOF
net.ipv4.ip_forward = 1
vm.swappiness = 0
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
net.ipv4.tcp_max_syn_backlog = 65536
net.core.netdev_max_backlog = 32768
net.core.somaxconn = 32768
net.core.wmem_default = 8388608
net.core.rmem_default = 8388608
net.core.rmem_max = 16777216
net.core.wmem_max = 16777216
net.ipv4.tcp_timestamps = 0
net.ipv4.tcp_synack_retries = 2
net.ipv4.tcp_syn_retries = 2
net.ipv4.tcp_tw_recycle = 1
net.ipv4.tcp_tw_reuse = 1
net.ipv4.tcp_mem = 94500000 915000000 927000000
net.ipv4.tcp_max_orphans = 3276800
net.ipv4.ip_local_port_range = 1024 65535
EOF
sysctl -p
## 修改文件打开数
cat >>/etc/security/limits.conf <<EOF
* soft memlock unlimited
* hard memlock unlimited
* soft nofile 65535
* hard nofile 65535
* soft nproc 65535
* hard nproc 65535
EOF
## 系统关闭使用交换内存
echo "swapoff -a">>/etc/rc.local
chmod +x /etc/rc.local
swapoff -a
## 注释掉/etc/fstab的swap行
# /dev/mapper/centos-swap swap swap defaults 0 0
## 创建k8s.conf
vim /etc/sysctl.d/k8s.conf
## 写入如下配置
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
## 加载br_netfilter
modprobe br_netfilter
sysctl -p /etc/sysctl.d/k8s.conf
3. 配置CentOS YUM源
## 配置国内tencent yum源地址、epel源地址、Kubernetes源地址
mkdir -p /etc/yum.repo.d/repo.bak
mv /etc/yum.repo.d/*.repo /etc/yum.repo.d/repo.bak
wget -O /etc/yum.repos.d/CentOS-Base.repo http://mirrors.cloud.tencent.com/repo/centos7_base.repo
wget -O /etc/yum.repos.d/epel.repo http://mirrors.cloud.tencent.com/repo/epel-7.repo
配置国内Kubernetes源地址vim /etc/yum.repos.d/kubernetes.repo
[kubernetes]
name=Kubernetes Repo
baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64/
gpgcheck=0
gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg
enabled=1
yum clean all && yum makecache
4. 安装一些依赖软件包
yum install -y conntrack ipvsadm ipset jq sysstat curl iptables libseccomp bash-completion yum-utils device-mapper-persistent-data lvm2 net-tools conntrack-tools vim libtool-ltdl
5. 时间同步配置
yum install chrony –y systemctl enable chronyd.service && systemctl start chronyd.service && systemctl status chronyd.service chronyc sources
运行date命令看下系统时间，过一会儿时间就会同步。如果同步失败检查是不是因为公司内部网导致无法同步时间
6. 以上操作后，全部重启一下。
7. 安装docker
## 配置docker yum 源
cd /etc/yum.repos.d && wget https://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo
## 查看docker-ce的可用资源
yum list docker-ce.x86_64 --showduplicates | sort -r
会显示如下的docker-ce信息
Repository cr is listed more than once in the configuration
Repository fasttrack is listed more than once in the configuration
已加载插件：fastestmirror, langpacks
已安装的软件包
可安装的软件包
Loading mirror speeds from cached hostfile
* elrepo: mirrors.tuna.tsinghua.edu.cn
docker-ce.x86_64 3:19.03.1-3.el7 docker-ce-stable
docker-ce.x86_64 3:19.03.1-3.el7 @docker-ce-stable
docker-ce.x86_64 3:19.03.0-3.el7 docker-ce-stable
docker-ce.x86_64 3:18.09.8-3.el7 docker-ce-stable
docker-ce.x86_64 3:18.09.7-3.el7 docker-ce-stable
docker-ce.x86_64 3:18.09.6-3.el7 docker-ce-stable
docker-ce.x86_64 3:18.09.5-3.el7 docker-ce-stable
docker-ce.x86_64 3:18.09.4-3.el7 docker-ce-stable
docker-ce.x86_64 3:18.09.3-3.el7 docker-ce-stable
docker-ce.x86_64 3:18.09.2-3.el7 docker-ce-stable
docker-ce.x86_64 3:18.09.1-3.el7 docker-ce-stable
docker-ce.x86_64 3:18.09.0-3.el7 docker-ce-stable
docker-ce.x86_64 18.06.3.ce-3.el7 docker-ce-stable
docker-ce.x86_64 18.06.2.ce-3.el7 docker-ce-stable
docker-ce.x86_64 18.06.1.ce-3.el7 docker-ce-stable
docker-ce.x86_64 18.06.0.ce-3.el7 docker-ce-stable
docker-ce.x86_64 18.03.1.ce-1.el7.centos docker-ce-stable
docker-ce.x86_64 18.03.0.ce-1.el7.centos docker-ce-stable
docker-ce.x86_64 17.12.1.ce-1.el7.centos docker-ce-stable
docker-ce.x86_64 17.12.0.ce-1.el7.centos docker-ce-stable
docker-ce.x86_64 17.09.1.ce-1.el7.centos docker-ce-stable
docker-ce.x86_64 17.09.0.ce-1.el7.centos docker-ce-stable
docker-ce.x86_64 17.06.2.ce-1.el7.centos docker-ce-stable
docker-ce.x86_64 17.06.1.ce-1.el7.centos docker-ce-stable
docker-ce.x86_64 17.06.0.ce-1.el7.centos docker-ce-stable
docker-ce.x86_64 17.03.3.ce-1.el7 docker-ce-stable
docker-ce.x86_64 17.03.2.ce-1.el7.centos docker-ce-stable
docker-ce.x86_64 17.03.1.ce-1.el7.centos docker-ce-stable
docker-ce.x86_64 17.03.0.ce-1.el7.centos docker-ce-stable
选择你想要得版本，我使用了最新版本
yum -y install docker-ce
配置镜像加速器和docker数据存放路径
vim /etc/docker/daemon.json
写入如下配置
{
"registry-mirrors": ["https://q2hy3fzi.mirror.aliyuncs.com"],
"graph": "/tol/docker-data" ,
"exec-opts":["native.cgroupdriver=systemd"]
}
设置自启动
systemctl enable docker && systemctl start docker
8. 安装 kubeadm、kubelet、kubectl K8S_VERSION=v1.15.3
cat <<EOF > /etc/yum.repos.d/kubernetes.repo
[kubernetes]
name=Kubernetes
baseurl=http://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64
enabled=1
gpgcheck=0
repo_gpgcheck=0
gpgkey=http://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg
http://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
EOF
yum install -y kubeadm kubelet kubectl
kubelet --version //v1.15.3
kubelet启动设置
vim /etc/sysconfig/kubelet
写入如下配置
KUBELET_EXTRA_ARGS="--fail-swap-on=false"
再重启
systemctl daemon-reload
9. master节点设置(192.168.222.129)
下载相关镜像
#!/bin/bash
# master 节点 shell
K8S_VERSION=v1.15.3
ETCD_VERSION=3.3.10
DNS_VERSION=1.3.1
PAUSE_VERSION=3.1
FLANNEL_VERSION=v0.11.0-amd64
DASHBOARD_VERSION=v1.10.1
// 下载镜像
docker pull registry.cn-hangzhou.aliyuncs.com/google_containers/kube-apiserver:$K8S_VERSION
docker pull registry.cn-hangzhou.aliyuncs.com/google_containers/kube-controller-manager:$K8S_VERSION
docker pull registry.cn-hangzhou.aliyuncs.com/google_containers/kube-scheduler:$K8S_VERSION
docker pull registry.cn-hangzhou.aliyuncs.com/google_containers/kube-proxy:$K8S_VERSION
docker pull registry.cn-hangzhou.aliyuncs.com/google_containers/pause:$PAUSE_VERSION
docker pull registry.cn-hangzhou.aliyuncs.com/google_containers/etcd:$ETCD_VERSION
docker pull registry.cn-hangzhou.aliyuncs.com/google_containers/coredns:$DNS_VERSION
docker pull jmgao1983/flannel:$FLANNEL_VERSION
docker pull siriuszg/kubernetes-dashboard-amd64:$DASHBOARD_VERSION
# 修改tag
docker tag registry.cn-hangzhou.aliyuncs.com/google_containers/kube-apiserver:$K8S_VERSION k8s.gcr.io/kube-apiserver:$K8S_VERSION
docker tag registry.cn-hangzhou.aliyuncs.com/google_containers/kube-controller-manager:$K8S_VERSION k8s.gcr.io/kube-controller-manager:$K8S_VERSION
docker tag registry.cn-hangzhou.aliyuncs.com/google_containers/kube-scheduler:$K8S_VERSION k8s.gcr.io/kube-scheduler:$K8S_VERSION
docker tag registry.cn-hangzhou.aliyuncs.com/google_containers/kube-proxy:$K8S_VERSION k8s.gcr.io/kube-proxy:$K8S_VERSION
docker tag registry.cn-hangzhou.aliyuncs.com/google_containers/pause:$PAUSE_VERSION k8s.gcr.io/pause:$PAUSE_VERSION
docker tag registry.cn-hangzhou.aliyuncs.com/google_containers/etcd:$ETCD_VERSION k8s.gcr.io/etcd:$ETCD_VERSION
docker tag registry.cn-hangzhou.aliyuncs.com/google_containers/coredns:$DNS_VERSION k8s.gcr.io/coredns:$DNS_VERSION
docker tag jmgao1983/flannel:$FLANNEL_VERSION quay.io/coreos/flannel:$FLANNEL_VERSION
docker tag siriuszg/kubernetes-dashboard-amd64:$DASHBOARD_VERSION k8s.gcr.io/kubernetes-dashboard-amd64:$DASHBOARD_VERSION
#删除冗余的images
docker rmi registry.cn-hangzhou.aliyuncs.com/google_containers/kube-apiserver:$K8S_VERSION
docker rmi registry.cn-hangzhou.aliyuncs.com/google_containers/kube-controller-manager:$K8S_VERSION
docker rmi registry.cn-hangzhou.aliyuncs.com/google_containers/kube-scheduler:$K8S_VERSION
docker rmi registry.cn-hangzhou.aliyuncs.com/google_containers/kube-proxy:$K8S_VERSION
docker rmi registry.cn-hangzhou.aliyuncs.com/google_containers/pause:$PAUSE_VERSION
docker rmi registry.cn-hangzhou.aliyuncs.com/google_containers/etcd:$ETCD_VERSION
docker rmi registry.cn-hangzhou.aliyuncs.com/google_containers/coredns:$DNS_VERSION
docker rmi jmgao1983/flannel:$FLANNEL_VERSION
docker rmi siriuszg/kubernetes-dashboard-amd64:$DASHBOARD_VERSION
集群安装初始化(192.168.222.129)
## 初始化命令
kubeadm init --kubernetes-version=v1.15.3 --pod-network-cidr=10.244.0.0/16 --ignore-preflight-errors=Swap
这时候出现如下信息表明安装成功
Your Kubernetes master has initialized successfully!
To start using your cluster, you need to run the following as a regular user:
mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config
You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
https://kubernetes.io/docs/concepts/cluster-administration/addons/
You can now join any number of machines by running the following on each node
as root:
kubeadm join 192.168.222.129:6443 --token 981it6.k4kqs2i73e1bfd1p \
--discovery-token-ca-cert-hash sha256:5cc5c1c2ace7b720a178840c951b2a05c679d26b8d6a1cfc81aa7e006e6a6ef9
按照上面的提示执行推荐操作
mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config
查看集群健康状况
kubectl get cs
集群安装过程中遇到问题，重置操作,如需执行此操作，所有节点都需要执行（报错时使用,不报错不用）
kubeadm reset
安装网络插件
kube-flannel.yml 文件需要自己下载上传
kubectl apply -f ./kube-flannel.yml
查看集群中的组件运行状态
kubectl get pods --all-namespaces
10. node节点设置(192.168.222.130和192.168.222.131子节点配置)
下载镜像
#!/bin/bash
# node 节点 shell
K8S_VERSION=v1.15.3
ETCD_VERSION=3.3.10
DNS_VERSION=1.3.1
PAUSE_VERSION=3.1
FLANNEL_VERSION=v0.11.0-amd64
DASHBOARD_VERSION=v1.10.1
## node 安装插件
docker pull registry.cn-hangzhou.aliyuncs.com/google_containers/kube-proxy:$K8S_VERSION
docker pull registry.cn-hangzhou.aliyuncs.com/google_containers/pause:$PAUSE_VERSION
docker pull jmgao1983/flannel:v0.11.0-amd64
docker pull siriuszg/kubernetes-dashboard-amd64:$DASHBOARD_VERSION
docker tag registry.cn-hangzhou.aliyuncs.com/google_containers/kube-proxy:$K8S_VERSION k8s.gcr.io/kube-proxy:$K8S_VERSION
docker tag registry.cn-hangzhou.aliyuncs.com/google_containers/pause:$PAUSE_VERSION k8s.gcr.io/pause:$PAUSE_VERSION
docker tag jmgao1983/flannel:$FLANNEL_VERSION quay.io/coreos/flannel:$FLANNEL_VERSION
docker tag siriuszg/kubernetes-dashboard-amd64:$DASHBOARD_VERSION k8s.gcr.io/kubernetes-dashboard-amd64:$DASHBOARD_VERSION
docker rmi jmgao1983/flannel:$FLANNEL_VERSION
docker rmi registry.cn-hangzhou.aliyuncs.com/google_containers/pause:$PAUSE_VERSION
docker rmi registry.cn-hangzhou.aliyuncs.com/google_containers/kube-proxy:$K8S_VERSION
docker rmi siriuszg/kubernetes-dashboard-amd64:$DASHBOARD_VERSION
加入节点
这里的信息在主节点初始化完成后会出现，按照自己初始化完后的信息操作，这里仅供参考
kubeadm join 192.168.222.129:6443 --token 9ump71.6fnndushlwn87fnf \
--discovery-token-ca-cert-hash sha256:addb0cd073a460331fe4cadd1f02c69e9b1bdad4e62188fae788ff65e0a8fb11 --ignore-preflight-errors=Swap
出现下面的信息表明子节点加入主节点成功,可以使用该命令 kubectl get nodes查看
This node has joined the cluster:
* Certificate signing request was sent to master and a response
was received.
* The Kubelet was informed of the new secure connection details.
Run 'kubectl get nodes' on the master to see this node join the cluster.
如果执行上述命令报The connection to the server localhost:8080 was refused - did you specify the right host or port?
操作如下
1. 将主节点中的【/etc/kubernetes/admin.conf】文件拷贝到从节点相同目录下
2. echo "export KUBECONFIG=/etc/kubernetes/admin.conf" >> ~/.bash_profile
3. source ~/.bash_profile
11. 安装 dashboard组件(我是在主节点上操作的)
配置dashboard
kubectl create -f https://raw.githubusercontent.com/kubernetes/dashboard/v2.0.0-beta1/aio/deploy/recommended.yaml
集群配置，生成浏览器证书(这些证书在后面浏览器打开dashboard时需要导入)
# 生成client-certificate-data
grep 'client-certificate-data' ~/.kube/config | head -n 1 | awk '{print $2}' | base64 -d >> kubecfg.crt
# 生成client-key-data
grep 'client-key-data' ~/.kube/config | head -n 1 | awk '{print $2}' | base64 -d >> kubecfg.key
# 生成p12
openssl pkcs12 -export -clcerts -inkey kubecfg.key -in kubecfg.crt -out kubecfg.p12 -name "kubernetes-client"
# 导入证书后浏览器重启
创建admin-user账号，并放在kube-system名称空间下
vim admin-user.yaml
写入如下配置
apiVersion: v1
kind: ServiceAccount
metadata:
name: admin-user
namespace: kube-system
使用该命令加载配置
kubectl create -f admin-user.yaml
绑定角色
vim admin-user-role-binding.yaml
写入如下配置
apiVersion: rbac.authorization.k8s.io/v1beta1
kind: ClusterRoleBinding
metadata:
name: admin-user
roleRef:
apiGroup: rbac.authorization.k8s.io
kind: ClusterRole
name: cluster-admin
subjects:
- kind: ServiceAccount
name: admin-user
namespace: kube-system
使用该命令加载配置
kubectl create -f admin-user-role-binding.yaml
登录dashboard
在浏览器中访问如下url
https://127.0.0.1:6443/api/v1/namespaces/kubernetes-dashboard/services/https:kubernetes-dashboard:/proxy/
在打开的页面中选择token方式,获取token的方式如下
kubectl -n kube-system describe secret $(kubectl -n kube-system get secret | grep admin-user | awk '{print $1}')
12. 集成Heapster
Heapster是容器集群监控和性能分析工具
执行命令
kubectl create -f http://mirror.faasx.com/kubernetes/heapster/deploy/kube-config/influxdb/influxdb.yaml
kubectl create -f http://mirror.faasx.com/kubernetes/heapster/deploy/kube-config/influxdb/grafana.yaml
kubectl create -f http://mirror.faasx.com/kubernetes/heapster/deploy/kube-config/influxdb/heapster.yaml
kubectl create -f http://mirror.faasx.com/kubernetes/heapster/deploy/kube-config/rbac/heapster-rbac.yaml
当pod的状态全都变成了running，则能够使用。
补充
初始化获取要下载的镜像列表
使用kubeadm来搭建Kubernetes，那么就需要下载得到Kubernetes运行的对应基础镜像，比如：kube- proxy、kube-apiserver、kube-controller-manager等等 。那么有什么方法可以得知要下载哪些镜像 呢？从kubeadm v1.11+版本开始，增加了一个kubeadm config print-default 命令，可以让我们方便 的将kubeadm的默认配置输出到文件中，这个文件里就包含了搭建K8S对应版本需要的基础配置环境。另 外，我们也可以执行 kubeadm config images list 命令查看依赖需要安装的镜像列表。
kubeadm config images list
网络除了使用flannel也可以使用calico具体参考Quickstart for Calico on Kubernetes