大纲
一、前言
二、环境准备
三、Corosync 安装与配置
四、Pacemaker 安装与配置
五、DRBD 安装与配置
六、MySQL 安装与配置
七、crmsh 资源管理
推荐阅读：
Linux 高可用(HA)集群基本概念详解 http://www.linuxidc.com/Linux/2013-08/88522.htm
Linux 高可用（HA）集群之Heartbeat详解 http://www.linuxidc.com/Linux/2013-08/88521.htm
一、前言
前几篇博文中我们讲解了，heartbeat、corosync、pacemaker，也讲解了高可用的Web集群、高可用的Mysql集群，这一篇博文 进行小小的总结，heartbeat与corosync是流行的Messaging Layer （集群信息层），非要在这两个当中选一个我选择corosync，至于理由是仁者见仁，智者见智啦，用过的人都知道。Pacemaker是最流行的 CRM（集群资源管理器），是从heartbeat v3中独立出来的资源管理器，同时Corosync+Pacemaker是最流行的高可用集群的套件，前面我们讲解的高可用的Mysql集群是 heartbaet+mysql+nfs组合，其有点令人不满意的是得要三台服务器，其中一台为共享存储，可是这对于中小型公司来说，花个好几万来买台服 务器，会不会有点浪费了，在这篇博文中我们将讲解，只用两台服务器来实现，高可用的Mysql数据库。在上一篇博文中我们已经详细讲解过了DRBD，这里 就不在重复说明，想看的博友可以参考一下这篇博文 http://www.linuxidc.com/Linux/2013-08/89035.htm (Linux 高可用（HA）集群之DRBD详解)，下面我们就来具体演示一下配置过程。
二、环境准备
1.操作系统
CentOS 6.4 X86_64位系统
2.软件环境
- corosync-1.4.1-15.el6_4.1.x86_64
- pacemaker-1.1.8-7.el6.x86_64
- crmsh-1.2.6-0.rc2.2.1.x86_64
- kmod-drbd84-8.4.2-1.el6_3.elrepo.x86_64
- drbd84-utils-8.4.2-1.el6.elrepo.x86_64
- mysql-5.5.33
3.拓扑环境
4.配置各节点互相解析
node1:
[root@node1 ~]# uname -n
node1.test.com
[root@node1 ~]# cat /etc/hosts
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
192.168.1.201 node1.test.com node1
192.168.1.202 node2.test.com node2
node2:
[root@node2 ~]# uname -n
node2.test.com
[root@node2 ~]# cat /etc/hosts
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
192.168.1.201 node1.test.com node1
192.168.1.202 node2.test.com node2
5.配置各节点ssh互信
node1:
[root@node1 ~]# ssh-keygen -t rsa -f ~/.ssh/id_rsa -P ''
[root@node1 ~]# ssh-copy-id -i .ssh/id_rsa.pub root@node2.test.com
node2:
[root@node2 ~]# ssh-keygen -t rsa -f ~/.ssh/id_rsa -P ''
[root@node2 ~]# ssh-copy-id -i .ssh/id_rsa.pub root@node1.test.com
6.配置各节点时间同步
node1:
[root@node1 ~]# ntpdate 202.120.2.101
node2:
[root@node2 ~]# ntpdate 202.120.2.101
7.各节点关闭防火墙与SELinux
node1:
[root@node1 ~]# service iptables stop
[root@node1 ~]# chkconfig iptables off
[root@node1 ~]# cat /etc/selinux/config
# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
# enforcing - SELinux security policy is enforced.
# permissive - SELinux prints warnings instead of enforcing.
# disabled - No SELinux policy is loaded.
SELINUX=disabled
node2:
[root@node2 ~]# service iptables stop
[root@node2 ~]# chkconfig iptables off
[root@node2 ~]# cat /etc/selinux/config
# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
# enforcing - SELinux security policy is enforced.
# permissive - SELinux prints warnings instead of enforcing.
# disabled - No SELinux policy is loaded.
SELINUX=disabled
8.各节点安装yum源
node1:
[root@node1 src]# wget http://download.Fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm
[root@node1 src]# rpm -ivh epel-release-6-8.noarch.rpm
warning: epel-release-6-8.noarch.rpm: Header V3 RSA/SHA256Signature, key ID 0608b895: NOKEY
Preparing... ########################################### [100%]
1:epel-release ########################################### [100%]
[root@node1 src]# rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-6
[root@node1 ~]# rpm -ivh http://elrepo.org/elrepo-release-6-5.el6.elrepo.noarch.rpm
[root@node1 ~]# yum list
node2:
[root@node2 src]# wget http://download.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm
[root@node2 src]# rpm -ivh epel-release-6-8.noarch.rpm
warning: epel-release-6-8.noarch.rpm: Header V3 RSA/SHA256Signature, key ID 0608b895: NOKEY
Preparing... ########################################### [100%]
1:epel-release ########################################### [100%]
[root@node2 src]# rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-6
[root@node2 ~]# rpm -ivh http://elrepo.org/elrepo-release-6-5.el6.elrepo.noarch.rpm
[root@node2 ~]# yum list
三、Corosync 安装与配置（参考博文：http://www.linuxidc.com/Linux/2013-08/88733.htm ）
1.安装Corosync
node1:
[root@node1 ~]# yum install -y corosync
node2:
[root@node2 ~]# yum install -y corosync
2.配置Corosync(注，所有的配置说明我就不详细说明了，因为前面的博文全部讲解过)
[root@node1 ~]# cd /etc/corosync/
[root@node1 corosync]# ll
总用量 16
-rw-r--r-- 1 root root 445 5月 15 05:09 corosync.conf.example
-rw-r--r-- 1 root root 1084 5月 15 05:09 corosync.conf.example.udpu
drwxr-xr-x 2 root root 4096 5月 15 05:09 service.d
drwxr-xr-x 2 root root 4096 5月 15 05:09 uidgid.d
[root@node1 corosync]# cp corosync.conf.example corosync.conf
[root@node1 corosync]# vim corosync.conf
[root@node1 corosync]# cat corosync.conf
# Please read the corosync.conf.5 manual page
compatibility: whitetank
totem {
version: 2
secauth: on
threads: 0
interface {
ringnumber: 0
bindnetaddr: 192.168.1.0
mcastaddr: 226.94.10.10
mcastport: 5405
ttl: 1
}
}
logging {
fileline: off
to_stderr: no
to_logfile: yes
to_syslog: no
logfile: /var/log/cluster/corosync.log
debug: off
timestamp: on
logger_subsys {
subsys: AMF
debug: off
}
}
amf {
mode: disabled
}
service {
ver: 0
name: pacemaker
}
aisexec {
user: root
group: root
}
3.生成密钥文件
[root@node1 corosync]# mv /dev/{random,random.bak}
[root@node1 corosync]# ln -s /dev/urandom /dev/random
[root@node1 corosync]# corosync-keygen
Corosync Cluster Engine Authentication key generator.
Gathering 1024 bits for key from /dev/random.
Press keys on your keyboard to generate entropy.
Writing corosync key to /etc/corosync/authkey.
[root@node1 corosync]# ll
总用量 24
-r-------- 1 root root 128 8月 17 17:17 authkey
-rw-r--r-- 1 root root 544 8月 17 17:14 corosync.conf
-rw-r--r-- 1 root root 445 5月 15 05:09 corosync.conf.example
-rw-r--r-- 1 root root 1084 5月 15 05:09 corosync.conf.example.udpu
drwxr-xr-x 2 root root 4096 5月 15 05:09 service.d
drwxr-xr-x 2 root root 4096 5月 15 05:09 uidgid.d
4.将node1上配置文件复制到node2上
[root@node1 corosync]# scp authkey corosync.conf node2:/etc/corosync/
authkey 100% 128 0.1KB/s 00:00
corosync.conf 100% 542 0.5KB/s 00:00
好了，到这里corosync配置完成，下面我们配置pacemaker
四、Pacemaker 安装与配置（参考博文：http://www.linuxidc.com/Linux/2013-08/89037.htm ）
1.安装pacemaker
node1:
[root@node1 ~]# yum install -y pacemaker
node2:
[root@node2 ~]# yum install -y pacemaker
2.安装crmsh
node1:
[root@node1 ~]# wget http://download.openSUSE.org/repositories/network:/ha-clustering:/Stable/CentOS_CentOS-6/x86_64/crmsh-1.2.6-0.rc2.2.1.x86_64.rpm
[root@node1 ~]# rpm -ivh crmsh-1.2.6-0.rc2.2.1.x86_64.rpm
warning: crmsh-1.2.6-0.rc2.2.1.x86_64.rpm: Header V3 DSA/SHA1 Signature, key ID 7b709911: NOKEY
error: Failed dependencies:
pssh is needed by crmsh-1.2.6-0.rc2.2.1.x86_64
python-dateutil is needed by crmsh-1.2.6-0.rc2.2.1.x86_64
python-lxml is needed by crmsh-1.2.6-0.rc2.2.1.x86_64
[root@node1 ~]# yum install -y python-dateutil python-lxml
[root@node1 ~]# rpm -ivh crmsh-1.2.6-0.rc2.2.1.x86_64.rpm --nodeps
warning: crmsh-1.2.6-0.rc2.2.1.x86_64.rpm: Header V3 DSA/SHA1 Signature, key ID 7b709911: NOKEY
Preparing... ########################################### [100%]
1:crmsh ########################################### [100%]
[root@node1 ~]# crm
Cannot change active directory to /var/lib/pacemaker/cores/root: No such file or directory (2)
crm(live)# help
This is crm shell, a Pacemaker command line interface.
Available commands:
cib manage shadow CIBs
resource resources management
configure CRM cluster configuration
node nodes management
options user preferences
history CRM cluster history
site Geo-cluster support
ra resource agents information center
status show cluster status
help,? show help (help topics for list of topics)
end,cd,up go back one level
quit,bye,exit exit the program
node2:
[root@node2 ~]# wget http://download.opensuse.org/repositories/network:/ha-clustering:/Stable/CentOS_CentOS-6/x86_64/crmsh-1.2.6-0.rc2.2.1.x86_64.rpm
[root@node2 ~]# rpm -ivh crmsh-1.2.6-0.rc2.2.1.x86_64.rpm
warning: crmsh-1.2.6-0.rc2.2.1.x86_64.rpm: Header V3 DSA/SHA1 Signature, key ID 7b709911: NOKEY
error: Failed dependencies:
pssh is needed by crmsh-1.2.6-0.rc2.2.1.x86_64
python-dateutil is needed by crmsh-1.2.6-0.rc2.2.1.x86_64
python-lxml is needed by crmsh-1.2.6-0.rc2.2.1.x86_64
[root@node2 ~]# yum install -y python-dateutil python-lxml
[root@node2 ~]# rpm -ivh crmsh-1.2.6-0.rc2.2.1.x86_64.rpm --nodeps
warning: crmsh-1.2.6-0.rc2.2.1.x86_64.rpm: Header V3 DSA/SHA1 Signature, key ID 7b709911: NOKEY
Preparing... ########################################### [100%]
1:crmsh ########################################### [100%]
[root@node2 ~]# crm
Cannot change active directory to /var/lib/pacemaker/cores/root: No such file or directory (2)
crm(live)# help
This is crm shell, a Pacemaker command line interface.
Available commands:
cib manage shadow CIBs
resource resources management
configure CRM cluster configuration
node nodes management
options user preferences
history CRM cluster history
site Geo-cluster support
ra resource agents information center
status show cluster status
help,? show help (help topics for list of topics)
end,cd,up go back one level
quit,bye,exit exit the program
3.启动corosync（注，在配置corosync时，将pacemaker整合进corosync中，corosync启动的同时也会启动pacemaker）
[root@node1 ~]# ssh node2 "service corosync start"
Starting Corosync Cluster Engine (corosync): [确定]
[root@node1 ~]# service corosync start
Starting Corosync Cluster Engine (corosync): [确定]
4.查看启动信息
(1).查看corosync引擎是否正常启动
[root@node1 ~]# grep -e "Corosync Cluster Engine" -e "configuration file" /var/log/cluster/corosync.log
Aug 17 17:31:20 corosync [MAIN ] Corosync Cluster Engine ('1.4.1'): started and ready to provide service.
Aug 17 17:31:20 corosync [MAIN ] Successfully read main configuration file '/etc/corosync/corosync.conf'.
(2).查看初始化成员节点通知是否正常发出
[root@node1 ~]# grep TOTEM /var/log/cluster/corosync.log
Aug 17 17:31:20 corosync [TOTEM ] Initializing transport (UDP/IP Multicast).
Aug 17 17:31:20 corosync [TOTEM ] Initializing transmit/receive security: libtomcrypt SOBER128/SHA1HMAC (mode 0).
Aug 17 17:31:21 corosync [TOTEM ] The network interface [192.168.1.201] is now up.
Aug 17 17:31:21 corosync [TOTEM ] A processor joined or left the membership and a new membership was formed.
(3).检查启动过程中是否有错误产生
[root@node1 ~]# grep ERROR: /var/log/cluster/corosync.log
Aug 17 17:31:21 corosync [pcmk ] ERROR: process_ais_conf: You have configured a cluster using the Pacemaker plugin for Corosync. The plugin is not supported in this environment and will be removed very soon.
Aug 17 17:31:21 corosync [pcmk ] ERROR: process_ais_conf: Please see Chapter 8 of 'Clusters from Scratch' (http://www.clusterlabs.org/doc) for details on using Pacemaker with CMAN
(4).查看pacemaker是否正常启动
[root@node1 ~]# grep pcmk_startup /var/log/cluster/corosync.log
Aug 17 17:31:21 corosync [pcmk ] info: pcmk_startup: CRM: Initialized
Aug 17 17:31:21 corosync [pcmk ] Logging: Initialized pcmk_startup
Aug 17 17:31:21 corosync [pcmk ] info: pcmk_startup: Maximum core file size is: 18446744073709551615
Aug 17 17:31:21 corosync [pcmk ] info: pcmk_startup: Service: 9
Aug 17 17:31:21 corosync [pcmk ] info: pcmk_startup: Local hostname: node1.test.com
5.查看集群状态
[root@node1 ~]# crm status
Cannot change active directory to /var/lib/pacemaker/cores/root: No such file or directory (2)
Last updated: Sat Aug 17 17:36:24 2013
Last change: Sat Aug 17 17:31:33 2013 via crmd on node2.test.com
Stack: classic openais (with plugin)
Current DC: node2.test.com - partition with quorum
Version: 1.1.8-7.el6-394e906
2 Nodes configured, 2 expected votes
0 Resources configured.
Online: [ node1.test.com node2.test.com ]
注：node1与node2都在线，DC是node2，符合法定票数
五、DRBD 安装与配置（参考博文：http://www.linuxidc.com/Linux/2013-08/89035.htm ）
1.安装DRBD
node1:
[root@node1 ~]# yum -y install drbd84 kmod-drbd84
node2:
[root@node1 ~]# yum -y install drbd84 kmod-drbd84
2.配置DRBD
[root@node1 ~]# cat /etc/drbd.d/global_common.conf
global {
usage-count no; #让linbit公司收集目前drbd的使用情况，yes为参加，我们这里不参加设置为no
# minor-count dialog-refresh disable-ip-verification
}
common {
handlers {
pri-on-incon-degr "/usr/lib/drbd/notify-pri-on-incon-degr.sh; /usr/lib/drbd/notify-emergency-reboot.sh; echo b > /proc/sysrq-trigger ; reboot -f";
pri-lost-after-sb "/usr/lib/drbd/notify-pri-lost-after-sb.sh; /usr/lib/drbd/notify-emergency-reboot.sh; echo b > /proc/sysrq-trigger ; reboot -f";
local-io-error "/usr/lib/drbd/notify-io-error.sh; /usr/lib/drbd/notify-emergency-shutdown.sh; echo o > /proc/sysrq-trigger ; halt -f";
# fence-peer "/usr/lib/drbd/crm-fence-peer.sh";
# split-brain "/usr/lib/drbd/notify-split-brain.sh root";
# out-of-sync "/usr/lib/drbd/notify-out-of-sync.sh root";
# before-resync-target "/usr/lib/drbd/snapshot-resync-target-lvm.sh -p 15 -- -c 16k";
# after-resync-target /usr/lib/drbd/unsnapshot-resync-target-lvm.sh;
}
startup {
# wfc-timeout degr-wfc-timeout outdated-wfc-timeout wait-after-sb
}
options {
# cpu-mask on-no-data-accessible
}
disk {
# size max-bio-bvecs on-io-error fencing disk-barrier disk-flushes
# disk-drain md-flushes resync-rate resync-after al-extents
# c-plan-ahead c-delay-target c-fill-target c-max-rate
# c-min-rate disk-timeout
on-io-error detach; #同步错误的做法是分离
}
net {
# protocol timeout max-epoch-size max-buffers unplug-watermark
# connect-int ping-int sndbuf-size rcvbuf-size ko-count
# allow-two-primaries cram-hmac-alg shared-secret after-sb-0pri
# after-sb-1pri after-sb-2pri always-asbp rr-conflict
# ping-timeout data-integrity-alg tcp-cork on-congestion
# congestion-fill congestion-extents csums-alg verify-alg
# use-rle
cram-hmac-alg "sha1"; #设置加密算法sha1
shared-secret "mydrbdlab"; #设置加密key
}
}
3.增加资源
[root@node1 drbd.d]# cat web.res
resource web {
on node1.test.com {
device /dev/drbd0;
disk /dev/sdb;
address 192.168.1.201:7789;
meta-disk internal;
}
on node2.test.com {
device /dev/drbd0;
disk /dev/sdb;
address 192.168.1.202:7789;
meta-disk internal;
}
}
4.同步配置文件到node2’
[root@node1 drbd.d]# scp global_common.conf web.res node2:/etc/drbd.d/
5.node1与node2上初始化资源
node1:
[root@node1 ~]# drbdadm create-md web
Writing meta data...
initializing activity log
NOT initializing bitmap
New drbd meta data block successfully created.
node2:
[root@node2 ~]# drbdadm create-md web
Writing meta data...
initializing activity log
NOT initializing bitmap
New drbd meta data block successfully created.
6.启动DRBD
node1:
1 [root@node1 ~]# service drbd start
node2:
[root@node2 ~]# service drbd start
7.查看一下状态
node1:
[root@node1 ~]# drbd-overview
0:web/0Connected Secondary/SecondaryInconsistent/InconsistentC r-----
node2:
[root@node2 ~]# drbd-overview
0:web/0Connected Secondary/SecondaryInconsistent/InconsistentC r-----
8.设置node1为主节点
[root@node1 ~]# drbdadm -- --overwrite-data-of-peer primary web
[root@node1 ~]# drbd-overview
0:web/0 Connected Primary/Secondary UpToDate/UpToDate C r-----
9.格式化并挂载
[root@node1 ~]# mke2fs -j /dev/drbd
[root@node1 ~]# mkdir /drbd
[root@node1 ~]# mount /dev/drbd0 /drbd/
[root@node1 ~]# mount
/dev/sda2on / typeext4 (rw)
proc on /proctypeproc (rw)
sysfs on /systypesysfs (rw)
devpts on /dev/ptstypedevpts (rw,gid=5,mode=620)
tmpfs on /dev/shmtypetmpfs (rw)
/dev/sda1on /boottypeext4 (rw)
/dev/sda3on /datatypeext4 (rw)
none on /proc/sys/fs/binfmt_misctypebinfmt_misc (rw)
/dev/drbd0on /drbdtypeext3 (rw)
[root@node1 ~]# cd /drbd/
[root@node1 drbd]# cp /etc/inittab /drbd/
[root@node1 drbd]# ll
总用量 20
-rw-r--r-- 1 root root 884 8月 17 13:50 inittab
drwx------ 2 root root 16384 8月 17 13:49 lost+found
10.设置node2为主节点
[root@node1 ~]# umount /drbd/
[root@node1 ~]# drbdadm secondary web
[root@node1 ~]# drbd-overview
[root@node2 ~]# drbdadm primary web
[root@node2 ~]# drbd-overview
0:web/0Connected Primary/SecondaryUpToDate/UpToDateC r-----
[root@node2 ~]# mkdir /drbd
[root@node2 ~]# mount /dev/drbd0 /drbd/
[root@node2 ~]# ll /drbd/
总用量 20
-rw-r--r-- 1 root root 884 8月 17 13:50 inittab
drwx------ 2 root root 16384 8月 17 13:49 lost+found
好了，到这里DRBD配置全部完成，下面我们来配置MySQl
六、MySQL 安装与配置
1.安装Mysql
node1:
[root@node1 ~]# tar xf mysql-5.5.33-linux2.6-x86_64.tar.gz -C /usr/local/
[root@node1 ~]# cd /usr/local/
[root@node1 local]# ln -sv mysql-5.5.33-linux2.6-x86_64 mysql
"mysql" -> "mysql-5.5.33-linux2.6-x86_64"
[root@node1 ~]# chown -R root:mysql /usr/local/mysql/*
[root@node1 ~]# scp mysql-5.5.33-linux2.6-x86_64.tar.gz node2:/root/
node2:
[root@node2 ~]# tar xf mysql-5.5.33-linux2.6-x86_64.tar.gz -C /usr/local/
[root@node2 ~]# cd /usr/local/
[root@node2 local]# ln -sv mysql-5.5.33-linux2.6-x86_64 mysql
"mysql" -> "mysql-5.5.33-linux2.6-x86_64"
[root@node2 ~]# chown -R root:mysql /usr/local/mysql/*
2.创建Mysql用户与组
node1:
(1).创建mysql组
1 [root@node1 ~]# groupadd -g 3306 mysql
(2).创建mysql用户
[root@node1 ~]# useradd -u 3306 -g mysql -s /sbin/nologin -M mysql
(3).查看
[root@node1 ~]# id mysql
uid=3306(mysql) gid=3306(mysql) groups=3306(mysql)
node2:
(1).创建mysql组
[root@node2 ~]# groupadd -g 3306 mysql
(2).创建mysql用户
[root@node2 ~]# useradd -u 3306 -g mysql -s /sbin/nologin -M mysql
(3).查看
[root@node2 ~]# id mysql
uid=3306(mysql) gid=3306(mysql) groups=3306(mysql)
3.将node1的DRBD设置为主节点并挂载
[root@node1 ~]# drbd-overview
0:web/0 Connected Primary/Secondary UpToDate/UpToDate C r-----
[root@node1 ~]# mkdir /mydata
[root@node1 ~]# mount /dev/drbd0 /mydata/
[root@node1 ~]# cd /mydata/
[root@node1 mydata]# mkdir data
[root@node1 mydata]# chown -R mysql.mysql /mydata/data/
[root@node1 mydata]# ll
总用量 20
drwxr-xr-x 2 mysql mysql 4096 8月 17 18:37 data
drwx------ 2 root root 16384 8月 17 13:49 lost+found
4.提供配置文件
[root@node1 ~]# cp /usr/local/mysql/support-files/my-large.cnf /etc/my.cnf
[root@node1 ~]# vim /etc/my.cnf
#增加一行
datadir = /mydata/data
5.初始化Mysql
[root@node1 data]# /usr/local/mysql/scripts/mysql_install_db --datadir=/mydata/data/ --basedir=/usr/local/mysql --user=mysql
[root@node1 data]# ll
总用量 8
drwx------ 2 mysql root 4096 8月 17 18:40 mysql
drwx------ 2 mysql root 4096 8月 17 18:40 test
6.提供启动脚本
[root@node1 ~]# cp /usr/local/mysql/support-files/mysql.server /etc/init.d/mysqld
[root@node1 ~]# chmod +x /etc/init.d/mysqld
7.启动并测试Mysql
[root@node1 data]# service mysqld start
Starting MySQL..... SUCCESS!
[root@node1 data]# /usr/local/mysql/bin/mysql
Welcome to the MySQL monitor. Commands end with ; or \g.
Your MySQL connection id is 1
Server version: 5.5.33-log MySQL Community Server (GPL)
Copyright (c) 2000, 2013, Oracle and/or its affiliates. All rights reserved.
Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.
Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.
mysql> show databases;
+--------------------+
| Database |
+--------------------+
| information_schema |
| mysql |
| performance_schema |
| test |
+--------------------+
4 rows in set (0.08 sec)
mysql>
8.将node1上mysql配置文件与启动脚本复制到node2上
[root@node1 ~]# scp /etc/my.cnf node2:/etc/
my.cnf 100% 4687 4.6KB/s 00:00
[root@node1 ~]# scp /etc/init.d/mysqld node2:/etc/init.d/
mysqld 100% 11KB 10.6KB/s 00:00
9.关闭mysql并设置开机不启动
[root@node1 ~]# service mysqld stop
Shutting down MySQL. SUCCESS!
[root@node1 data]# chkconfig mysqld off
[root@node1 data]# chkconfig mysqld --list
mysqld 0:关闭 1:关闭 2:关闭 3:关闭 4:关闭 5:关闭 6:关闭
10.将node2节点上的DRBD设置为主节点并挂载
[root@node1 ~]# umount /mydata/
[root@node1 ~]# drbdadm secondary web
[root@node1 ~]# drbd-overview
0:web/0 Connected Secondary/Secondary UpToDate/UpToDate C r-----
[root@node2 ~]# drbdadm primary web
[root@node2 ~]# drbd-overview
0:web/0 Connected Primary/Secondary UpToDate/UpToDate C r-----
[root@node2 ~]# mkdir /mydata
[root@node2 ~]# mount /dev/drbd0 /mydata/
[root@node2 ~]# cd /mydata/
[root@node2 mydata]# ll
总用量 20
drwxr-xr-x 5 mysql mysql 4096 8月 17 19:41 data
drwx------ 2 root root 16384 8月 17 13:49 lost+found
11.启动并测试node2上的mysql
[root@node2 data]# service mysqld start
Starting MySQL... SUCCESS!
[root@node2 data]# /usr/local/mysql/bin/mysql
Welcome to the MySQL monitor. Commands end with ; or \g.
Your MySQL connection id is 1
Server version: 5.5.33-log MySQL Community Server (GPL)
Copyright (c) 2000, 2013, Oracle and/or its affiliates. All rights reserved.
Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.
Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.
mysql>
12.关闭node2上mysql并设置开机不启动
[root@node2 ~]# service mysqld stop
Shutting down MySQL. SUCCESS!
[root@node2 ~]# chkconfig mysqld off
[root@node2 ~]# chkconfig mysqld --list
mysqld 0:关闭 1:关闭 2:关闭 3:关闭 4:关闭 5:关闭 6:关闭
好了，到这里mysql配置全部完成，有一点得说明一下。启动mysql时，可能会出错查看一下错误日志会发现缺一下库文件 libaio，这里我们用yum install -y libaio安装一下，便能顺利启动。
七、crmsh 资源管理
1.关闭drbd并设置开机不启动
node1:
[root@node1 ~]# service drbd stop
Stopping all DRBD resources: .
[root@node1 ~]# chkconfig drbd off
[root@node1 ~]# chkconfig drbd --list
drbd 0:关闭 1:关闭 2:关闭 3:关闭 4:关闭 5:关闭 6:关闭
node2:
12345 [root@node2 ~]# service drbd stop
Stopping all DRBD resources:
[root@node2 ~]# chkconfig drbd off
[root@node2 ~]# chkconfig drbd --list
drbd 0:关闭 1:关闭 2:关闭 3:关闭 4:关闭 5:关闭 6:关闭
2.增加drbd资源
[root@node1 ~]# crm
Cannot change active directory to /var/lib/pacemaker/cores/root: No such file or directory (2)
crm(live)# configure
crm(live)configure# property stonith-enabled=false
crm(live)configure# property no-quorum-policy=ignore
crm(live)configure# verify
crm(live)configure# commit
crm(live)configure# primitive mysqldrbd ocf:heartbeat:drbd params drbd_resource=web op start timeout=240 op stop timeout=100 op monitor role=Master interval=20 timeout=30 op monitor role=Slave interval=30 timeout=30
crm(live)configure# ms ms_mysqldrbd mysqldrbd meta master-max=1 master-node-max=1 clone-max=2 clone-node-max=1 notify=true
crm(live)configure# show
node node1.test.com
node node2.test.com
primitive mysqldrbd ocf:heartbeat:drbd \
params drbd_resource="web" \
op start timeout="240" interval="0" \
op stop timeout="100" interval="0" \
op monitor role="Master" interval="20" timeout="30" \
op monitor role="Slave" interval="30" timeout="30"
ms ms_mysqldrbd mysqldrbd \
meta master-max="1" master-node-max="1" clone-max="2" clone-node-max="1" notify="true"
property $id="cib-bootstrap-options" \
dc-version="1.1.8-7.el6-394e906" \
cluster-infrastructure="classic openais (with plugin)" \
expected-quorum-votes="2" \
stonith-enabled="false" \
no-quorum-policy="ignore"
[root@node1 ~]# crm status
Cannot change active directory to /var/lib/pacemaker/cores/root: No such file or directory (2)
Last updated: Sat Aug 17 20:14:16 2013
Last change: Sat Aug 17 20:12:55 2013 via cibadmin on node1.test.com
Stack: classic openais (with plugin)
Current DC: node1.test.com - partition with quorum
Version: 1.1.8-7.el6-394e906
2 Nodes configured, 2 expected votes
2 Resources configured.
Online: [ node1.test.com node2.test.com ]
Master/Slave Set: ms_mysqldrbd [mysqldrbd]
Masters: [ node2.test.com ]
Slaves: [ node1.test.com ]
3.增加文件系统资源
crm(live)configure# primitive mystore ocf:heartbeat:Filesystem params device=/dev/drbd0 directory=/mydata fstype=ext3 op start timeout=60 op stop timeout=60
crm(live)configure# verify
crm(live)configure# colocation mystore_with_ms_mysqldrbd inf: ms_mysqldrbd:Master
ERROR: syntax in colocation: colocation mystore_with_ms_mysqldrbd inf: ms_mysqldrbd:Master
crm(live)configure# colocation mystore_with_ms_mysqldrbd inf: mystore ms_mysqldrbd:Master
crm(live)configure# order mystore_after_ms_mysqldrbd mandatory: ms_mysqldrbd:promote mystore:start
crm(live)configure# verify
crm(live)configure# commit
crm(live)configure# show
node node1.test.com
node node2.test.com
primitive mysqldrbd ocf:heartbeat:drbd \
params drbd_resource="web" \
op start timeout="240" interval="0" \
op stop timeout="100" interval="0" \
op monitor role="Master" interval="20" timeout="30" \
op monitor role="Slave" interval="30" timeout="30"
primitive mystore ocf:heartbeat:Filesystem \
params device="/dev/drbd0" directory="/mydata" fstype="ext3" \
op start timeout="60" interval="0" \
op stop timeout="60" interval="0"
ms ms_mysqldrbd mysqldrbd \
meta master-max="1" master-node-max="1" clone-max="2" clone-node-max="1" notify="true"
colocation mystore_with_ms_mysqldrbd inf: mystore ms_mysqldrbd:Master
order mystore_after_ms_mysqldrbd inf: ms_mysqldrbd:promote mystore:start
property $id="cib-bootstrap-options" \
dc-version="1.1.8-7.el6-394e906" \
cluster-infrastructure="classic openais (with plugin)" \
expected-quorum-votes="2" \
stonith-enabled="false" \
no-quorum-policy="ignore"
[root@node1 ~]# crm status
Cannot change active directory to /var/lib/pacemaker/cores/root: No such file or directory (2)
Last updated: Sat Aug 17 20:37:26 2013
Last change: Sat Aug 17 20:19:51 2013 via cibadmin on node1.test.com
Stack: classic openais (with plugin)
Current DC: node1.test.com - partition with quorum
Version: 1.1.8-7.el6-394e906
2 Nodes configured, 2 expected votes
3 Resources configured.
Online: [ node1.test.com node2.test.com ]
Master/Slave Set: ms_mysqldrbd [mysqldrbd]
Masters: [ node2.test.com ]
Slaves: [ node1.test.com ]
mystore (ocf::heartbeat:Filesystem): Started node2.test.com
[root@node2 ~]# mount
/dev/sda2 on / type ext4 (rw)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
tmpfs on /dev/shm type tmpfs (rw)
/dev/sda1 on /boot type ext4 (rw)
/dev/sda3 on /data type ext4 (rw)
none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)
/dev/drbd0 on /mydata type ext3 (rw)
[root@node2 ~]# cd /mydata/data/
[root@node2 data]# ll
总用量 29824
-rw-rw---- 1 mysql mysql 18874368 8月 17 19:48 ibdata1
-rw-rw---- 1 mysql mysql 5242880 8月 17 19:48 ib_logfile0
-rw-rw---- 1 mysql mysql 5242880 8月 17 18:57 ib_logfile1
drwx------ 2 mysql root 4096 8月 17 18:57 mysql
-rw-rw---- 1 mysql mysql 27698 8月 17 18:57 mysql-bin.000001
-rw-rw---- 1 mysql mysql 1061358 8月 17 18:57 mysql-bin.000002
-rw-rw---- 1 mysql mysql 126 8月 17 19:41 mysql-bin.000003
-rw-rw---- 1 mysql mysql 126 8月 17 19:48 mysql-bin.000004
-rw-rw---- 1 mysql mysql 76 8月 17 19:47 mysql-bin.index
-rw-r----- 1 mysql root 2302 8月 17 19:41 node1.test.com.err
-rw-r----- 1 mysql root 1849 8月 17 19:48 node2.test.com.err
drwx------ 2 mysql mysql 4096 8月 17 18:57 performance_schema
drwx------ 2 mysql root 4096 8月 17 18:57 test
4.增加mysql资源
crm(live)# configure
crm(live)configure# primitive mysqld lsb:mysqld
crm(live)configure# colocation mysqld_with_mystore inf: mysqld mystore
crm(live)configure# verify
crm(live)configure# show
node node1.test.com
node node2.test.com
primitive mysqld lsb:mysqld
primitive mysqldrbd ocf:heartbeat:drbd \
params drbd_resource="web" \
op start timeout="240" interval="0" \
op stop timeout="100" interval="0" \
op monitor role="Master" interval="20" timeout="30" \
op monitor role="Slave" interval="30" timeout="30"
primitive mystore ocf:heartbeat:Filesystem \
params device="/dev/drbd0" directory="/mydata" fstype="ext3" \
op start timeout="60" interval="0" \
op stop timeout="60" interval="0"
ms ms_mysqldrbd mysqldrbd \
meta master-max="1" master-node-max="1" clone-max="2" clone-node-max="1" notify="true"
colocation mysqld_with_mystore inf: mysqld mystore
colocation mystore_with_ms_mysqldrbd inf: mystore ms_mysqldrbd:Master
order mystore_after_ms_mysqldrbd inf: ms_mysqldrbd:promote mystore:start
property $id="cib-bootstrap-options" \
dc-version="1.1.8-7.el6-394e906" \
cluster-infrastructure="classic openais (with plugin)" \
expected-quorum-votes="2" \
stonith-enabled="false" \
no-quorum-policy="ignore"
crm(live)configure# order mysqld_after_mystore mandatory: mystore mysqld
crm(live)configure# verify
crm(live)configure# show
node node1.test.com
node node2.test.com
primitive mysqld lsb:mysqld
primitive mysqldrbd ocf:heartbeat:drbd \
params drbd_resource="web" \
op start timeout="240" interval="0" \
op stop timeout="100" interval="0" \
op monitor role="Master" interval="20" timeout="30" \
op monitor role="Slave" interval="30" timeout="30"
primitive mystore ocf:heartbeat:Filesystem \
params device="/dev/drbd0" directory="/mydata" fstype="ext3" \
op start timeout="60" interval="0" \
op stop timeout="60" interval="0"
ms ms_mysqldrbd mysqldrbd \
meta master-max="1" master-node-max="1" clone-max="2" clone-node-max="1" notify="true"
colocation mysqld_with_mystore inf: mysqld mystore
colocation mystore_with_ms_mysqldrbd inf: mystore ms_mysqldrbd:Master
order mysqld_after_mystore inf: mystore mysqld
order mystore_after_ms_mysqldrbd inf: ms_mysqldrbd:promote mystore:start
property $id="cib-bootstrap-options" \
dc-version="1.1.8-7.el6-394e906" \
cluster-infrastructure="classic openais (with plugin)" \
expected-quorum-votes="2" \
stonith-enabled="false" \
no-quorum-policy="ignore"
crm(live)configure# commit
[root@node1 ~]# crm status
Cannot change active directory to /var/lib/pacemaker/cores/root: No such file or directory (2)
Last updated: Sat Aug 17 20:46:35 2013
Last change: Sat Aug 17 20:46:07 2013 via cibadmin on node1.test.com
Stack: classic openais (with plugin)
Current DC: node1.test.com - partition with quorum
Version: 1.1.8-7.el6-394e906
2 Nodes configured, 2 expected votes
4 Resources configured.
Online: [ node1.test.com node2.test.com ]
Master/Slave Set: ms_mysqldrbd [mysqldrbd]
Masters: [ node2.test.com ]
Slaves: [ node1.test.com ]
mystore (ocf::heartbeat:Filesystem): Started node2.test.com
mysqld (lsb:mysqld): Started node2.test.com
[root@node2 ~]# netstat -ntulp | grep :3306
tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN 26907/mysqld
[root@node2 ~]# /usr/local/mysql/bin/mysql
Welcome to the MySQL monitor. Commands end with ; or \g.
Your MySQL connection id is 1
Server version: 5.5.33-log MySQL Community Server (GPL)
Copyright (c) 2000, 2013, Oracle and/or its affiliates. All rights reserved.
Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.
Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.
mysql>
5.增加vip资源
crm(live)# configure
crm(live)configure# primitive vip ocf:heartbeat:IPaddr params ip=192.168.1.200 nic=eth0 cidr_netmask=255.255.255.0
crm(live)configure# colocation vip_with_ms_mysqldrbd inf: ms_mysqldrbd:Master vip
crm(live)configure# verify
crm(live)configure# show
node node1.test.com
node node2.test.com
primitive mysqld lsb:mysqld
primitive mysqldrbd ocf:heartbeat:drbd \
params drbd_resource="web" \
op start timeout="240" interval="0" \
op stop timeout="100" interval="0" \
op monitor role="Master" interval="20" timeout="30" \
op monitor role="Slave" interval="30" timeout="30"
primitive mystore ocf:heartbeat:Filesystem \
params device="/dev/drbd0" directory="/mydata" fstype="ext3" \
op start timeout="60" interval="0" \
op stop timeout="60" interval="0"
primitive vip ocf:heartbeat:IPaddr \
params ip="192.168.1.200" nic="eth0" cidr_netmask="255.255.255.0"
ms ms_mysqldrbd mysqldrbd \
meta master-max="1" master-node-max="1" clone-max="2" clone-node-max="1" notify="true"
colocation mysqld_with_mystore inf: mysqld mystore
colocation mystore_with_ms_mysqldrbd inf: mystore ms_mysqldrbd:Master
colocation vip_with_ms_mysqldrbd inf: ms_mysqldrbd:Master vip
order mysqld_after_mystore inf: mystore mysqld
order mystore_after_ms_mysqldrbd inf: ms_mysqldrbd:promote mystore:start
property $id="cib-bootstrap-options" \
dc-version="1.1.8-7.el6-394e906" \
cluster-infrastructure="classic openais (with plugin)" \
expected-quorum-votes="2" \
stonith-enabled="false" \
crm(live)configure# commit
[root@node1 ~]# crm status
Cannot change active directory to /var/lib/pacemaker/cores/root: No such file or directory (2)
Last updated: Sat Aug 17 20:53:15 2013
Last change: Sat Aug 17 20:52:11 2013 via cibadmin on node1.test.com
Stack: classic openais (with plugin)
Current DC: node1.test.com - partition with quorum
Version: 1.1.8-7.el6-394e906
2 Nodes configured, 2 expected votes
5 Resources configured.
Online: [ node1.test.com node2.test.com ]
Master/Slave Set: ms_mysqldrbd [mysqldrbd]
Masters: [ node1.test.com ]
Slaves: [ node2.test.com ]
mystore (ocf::heartbeat:Filesystem): Started node1.test.com
mysqld (lsb:mysqld): Started node1.test.com
vip (ocf::heartbeat:IPaddr): Started node1.test.com
好了，到这里所有的资源配置全部完成，下面我们进行测试一下。
6.测试mysql高可用集群
(1).新增授权
[root@node1 ~]# /usr/local/mysql/bin/mysql
Welcome to the MySQL monitor. Commands end with ; or \g.
Your MySQL connection id is 2
Server version: 5.5.33-log MySQL Community Server (GPL)
Copyright (c) 2000, 2013, Oracle and/or its affiliates. All rights reserved.
Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.
Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.
mysql> grant all on *.* to root@"192.168.1.%" identified by "123456";
Query OK, 0 rows affected (0.10 sec)
mysql> flush privileges;
Query OK, 0 rows affected (0.00 sec)
(2).远程测试一下
[root@nfs ~]# yum install -y mysql
[root@nfs ~]# mysql
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2)
[root@nfs ~]# mysql -uroot -p123456 -h 192.168.1.200
Welcome to the MySQL monitor. Commands end with ; or \g.
Your MySQL connection id is 3
Server version: 5.5.33-log MySQL Community Server (GPL)
Copyright (c) 2000, 2013, Oracle and/or its affiliates. All rights reserved.
Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.
Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.
mysql> show databases;
+--------------------+
| Database |
+--------------------+
| information_schema |
| mysql |
| performance_schema |
| test |
+--------------------+
4 rows in set (0.06 sec)
mysql> create database mydb;
Query OK, 1 row affected (0.00 sec)
mysql>
(3).模拟一下故障
[root@node1 ~]# crm
Cannot change active directory to /var/lib/pacemaker/cores/root: No such file or directory (2)
crm(live)# node
crm(live)node# standby
crm(live)node# show
node1.test.com: normal
standby: on
node2.test.com: normal
[root@node2 ~]# crm status
Cannot change active directory to /var/lib/pacemaker/cores/root: No such file or directory (2)
Last updated: Sat Aug 17 21:02:13 2013
Last change: Sat Aug 17 21:02:00 2013 via crm_attribute on node1.test.com
Stack: classic openais (with plugin)
Current DC: node1.test.com - partition with quorum
Version: 1.1.8-7.el6-394e906
2 Nodes configured, 2 expected votes
5 Resources configured.
Node node1.test.com: standby
Online: [ node2.test.com ]
Master/Slave Set: ms_mysqldrbd [mysqldrbd]
Masters: [ node2.test.com ]
Stopped: [ mysqldrbd:1 ]
mystore (ocf::heartbeat:Filesystem): Started node2.test.com
mysqld (lsb:mysqld): Started node2.test.com
vip (ocf::heartbeat:IPaddr): Started node2.test.com
(4).再进行远程测试一下
mysql> create database testdb;
ERROR 2006 (HY000): MySQL server has gone away
No connection. Trying to reconnect...
Connection id: 1
Current database: *** NONE ***
Query OK, 1 row affected (0.42 sec)
mysql> show databases;
+--------------------+
| Database |
+--------------------+
| information_schema |
| mydb |
| mysql |
| performance_schema |
| test |
| testdb |
+--------------------+
6 rows in set (0.12 sec)
mysql>
大家可以看到依然可以访问，好了今天的所有的演示到这里就全部结束了，我们下次再见。^_^……
转载：http://www.linuxidc.com/Linux/2013-08/89036p3.htm