MySQL在新的XAMPP安装中查询速度极慢

I just reinstalled Windows 7 and I am trying to get my development environment up and running again. XAMPP installed ok, and my application is in htdocs and all databases have imported fine. I can view them in phpMyAdmin and everything looks intact.

我刚刚重新安装了Windows 7，我正试图让我的开发环境重新启动并运行。 XAMPP安装正常，我的应用程序在htdocs中，所有数据库都已导入正常。我可以在phpMyAdmin中查看它们，一切看起来都完好无损。

When trying to run the application, queries are so slow that most pages timeout before all the queries can complete.

尝试运行应用程序时，查询速度很慢，大多数页面在所有查询完成之前都会超时。

For example, pages this computer could generate in 3 seconds before, now go up to 30 seconds and the page times out.

例如，此计算机可以在3秒之前生成的页面，现在最多30秒，页面超时。

This is an XAMPP installation 1.7.7, but I have tried rolling back to their older versions and got the same result.

这是一个XAMPP安装1.7.7，但我尝试回滚到他们的旧版本并获得相同的结果。

There is nothing in the log files, as it's not actually erroring out, it's just performing the queries very slowly.

日志文件中没有任何内容，因为它实际上并没有错误输出，它只是非常缓慢地执行查询。

Even navigating the databases via phpMyAdmin takes about 3-10 seconds to load pages whereas it has previously been instant. So this eliminates my application (which also hasn't changed since when it was working very quickly before).

即使通过phpMyAdmin导航数据库也需要大约3-10秒来加载页面，而以前只是即时。所以这消除了我的应用程序（自从它之前很快就开始工作时也没有改变）。

Any ideas what could be causing this big slowdown in a fresh xampp install? Was there something in httpd.conf, php.ini or my.ini I might have setup prevously that got wiped by the fresh install and might now cause the database access to be slow?

有什么想法可能导致新的xampp安装中的这个大幅减速？在httpd.conf，php.ini或my.ini中是否有一些东西我可能已经设置好了被全新安装擦除，现在可能导致数据库访问速度慢？

Thanks!

谢谢！

1 个解决方案

#1

The problem appeared to be in the query cache and InnoDB setup for MySQL. Although XAMPP has lines for InnoDB in the my.ini, there were additional that needed to be added.

问题似乎出现在MySQL的查询缓存和InnoDB设置中。虽然XAMPP在my.ini中有InnoDB的行，但还需要添加其他内容。

Below is the config I have saved from my previous build. When I added these to my.ini and restarted the server everything seemed to work at full speed again.

以下是我之前构建中保存的配置。当我将这些添加到my.ini并重新启动服务器时，一切似乎再次以全速运行。

I am not sure whether this fixed an underlying slowdown issue, or if the use of a query cache is now just masking it, but it's working well enough! On with development!

我不确定这是否修复了潜在的减速问题，或者是否现在只使用查询缓存来掩盖它，但它运行良好！随着发展！

    #----------------------------------------------------
    #          !!!! Query Cache Config !!!!
    #----------------------------------------------------

    query-cache-size = 524288000
    query-cache-limit = 5242880
    query-cache-type = 1

    #----------------------------------------------------
    #          !!!! InnoDB Buffer Config !!!!
    #----------------------------------------------------

    innodb-buffer-pool-size = 1000M
    innodb-additional-mem-pool-size = 200M
    innodb-log-files-in-group = 2
    innodb-log-buffer-size = 10M
    innodb-file-per-table = 1

UPDATE

Sample config file that worked using this technique (MySQL 5.7 tested on Windows)

使用此技术工作的示例配置文件（在Windows上测试的MySQL 5.7）

# The following options will be passed to all MySQL clients
[client] 
# password       = your_password 
port            = 3306 
socket          = "C:/xampp/mysql/mysql.sock"


# Here follows entries for some specific programs 

# The MySQL server
[mysqld]
port= 3306
socket = "C:/xampp/mysql/mysql.sock"
basedir = "C:/xampp/mysql" 
tmpdir = "C:/xampp/tmp" 
datadir = "C:/xampp/mysql/data"
pid_file = "mysql.pid"
# enable-named-pipe
key_buffer = 16M
max_allowed_packet = 1M
sort_buffer_size = 512K
net_buffer_length = 8K
read_buffer_size = 256K
read_rnd_buffer_size = 512K
myisam_sort_buffer_size = 8M
log_error = "mysql_error.log"

# Change here for bind listening
# bind-address="127.0.0.1" 
# bind-address = ::1          # for ipv6

# Where do all the plugins live
plugin_dir = "C:/xampp/mysql/lib/plugin/" 

# Don't listen on a TCP/IP port at all. This can be a security enhancement,
# if all processes that need to connect to mysqld run on the same host.
# All interaction with mysqld must be made via Unix sockets or named pipes.
# Note that using this option without enabling named pipes on Windows
# (via the "enable-named-pipe" option) will render mysqld useless!
# 
# commented in by lampp security
#skip-networking
#skip-federated

# Replication Master Server (default)
# binary logging is required for replication
# log-bin deactivated by default since XAMPP 1.4.11
#log-bin=mysql-bin

# required unique id between 1 and 2^32 - 1
# defaults to 1 if master-host is not set
# but will not function as a master if omitted
server-id   = 1

# Replication Slave (comment out master section to use this)
#
# To configure this host as a replication slave, you can choose between
# two methods :
#
# 1) Use the CHANGE MASTER TO command (fully described in our manual) -
#    the syntax is:
#
#    CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,
#    MASTER_USER=<user>, MASTER_PASSWORD=<password> ;
#
#    where you replace <host>, <user>, <password> by quoted strings and
#    <port> by the master's port number (3306 by default).
#
#    Example:
#
#    CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,
#    MASTER_USER='joe', MASTER_PASSWORD='secret';
#
# OR
#
# 2) Set the variables below. However, in case you choose this method, then
#    start replication for the first time (even unsuccessfully, for example
#    if you mistyped the password in master-password and the slave fails to
#    connect), the slave will create a master.info file, and any later
#    change in this file to the variables' values below will be ignored and
#    overridden by the content of the master.info file, unless you shutdown
#    the slave server, delete master.info and restart the slaver server.
#    For that reason, you may want to leave the lines below untouched
#    (commented) and instead use CHANGE MASTER TO (see above)
#
# required unique id between 2 and 2^32 - 1
# (and different from the master)
# defaults to 2 if master-host is set
# but will not function as a slave if omitted
#server-id       = 2
#
# The replication master for this slave - required
#master-host     =   <hostname>
#
# The username the slave will use for authentication when connecting
# to the master - required
#master-user     =   <username>
#
# The password the slave will authenticate with when connecting to
# the master - required
#master-password =   <password>
#
# The port the master is listening on.
# optional - defaults to 3306
#master-port     =  <port>
#
# binary logging - not required for slaves, but recommended
#log-bin=mysql-bin


# Point the following paths to different dedicated disks
#tmpdir = "C:/xampp/tmp"
#log-update = /path-to-dedicated-directory/hostname

# Uncomment the following if you are using BDB tables
#bdb_cache_size = 4M
#bdb_max_lock = 10000

# Comment the following if you are using InnoDB tables
#skip-innodb
innodb_data_home_dir = "C:/xampp/mysql/data"
innodb_data_file_path = ibdata1:10M:autoextend
innodb_log_group_home_dir = "C:/xampp/mysql/data"
#innodb_log_arch_dir = "C:/xampp/mysql/data"
## You can set .._buffer_pool_size up to 50 - 80 %
## of RAM but beware of setting memory usage too high
innodb_buffer_pool_size = 1000M
innodb_additional_mem_pool_size = 200M
## Set .._log_file_size to 25 % of buffer pool size
innodb_log_file_size = 250M
innodb_log_buffer_size = 10M
innodb_flush_log_at_trx_commit = 1
innodb_lock_wait_timeout = 50

## UTF 8 Settings
#init-connect=\'SET NAMES utf8\'
#collation_server=utf8_unicode_ci
#character_set_server=utf8
#skip-character-set-client-handshake
#character_sets-dir="C:/xampp/mysql/share/charsets"

[mysqldump]
quick
max_allowed_packet = 16M

[mysql]
no-auto-rehash
# Remove the next comment character if you are not familiar with SQL
#safe-updates

[isamchk]
key_buffer = 20M
sort_buffer_size = 20M
read_buffer = 2M
write_buffer = 2M

[myisamchk]
key_buffer = 20M
sort_buffer_size = 20M
read_buffer = 2M
write_buffer = 2M

[mysqlhotcopy]
interactive-timeout