拓扑图:
一.交换机配置
通过路由器子接口的方式实现vlan之间的路由.
conf t
vlan 10
vlan 20
int f0/1
switchport access vlan 10
int f0/2
switchport access vlan 20
查看switchport
show int switchport
int f0/24
switchport mode trunk
二.路由器配置
int f0/0.1
encapsulation dot1Q 10
ip address 192.168.1.1 255.255.255.0
exit
int f0/0.2
RTA(config-subif)#encapsulation dot1Q 20
RTA(config-subif)#ip address 192.168.2.1 255.255.255.0
RTA(config-subif)#no sh
RTA(config-subif)#exit
int f0/0
no shutdown