CPU：RK3288
系统：Android 5.1
注：系统中自带的模块没有AP6212，相近的只有AP6210，设置为AP6210，直接添加固件也可以正常使用。
此文是手动添加AP6212的例程。
1、在设备树中修改 wifi 芯片为 ap6212，
kernel/arch/arm/boot/dts/rk3288-tb_8846.dts
diff --git a/kernel/arch/arm/boot/dts/rk3288-tb_8846.dts b/kernel/arch/arm/boot/dts/rk3288-tb_8846.dts
index 6a65163..aa5480d
--- a/kernel/arch/arm/boot/dts/rk3288-tb_8846.dts
+++ b/kernel/arch/arm/boot/dts/rk3288-tb_8846.dts
@@ -, +, @@
* rtl8188eu, rtl8723bs, rtl8723bu
* esp8089
*/
- wifi_chip_type = "ap6330";
+ wifi_chip_type = "ap6212"; sdio_vref = <>; //1800mv or 3300mv
2、在 Kconfig 文件中增加 AP6212 选项。
/kernel/drivers/net/wireless/Kconfig
diff --git a/kernel/drivers/net/wireless/Kconfig b/kernel/drivers/net/wireless/Kconfig
index 544aa86..3e1026d
--- a/kernel/drivers/net/wireless/Kconfig
+++ b/kernel/drivers/net/wireless/Kconfig
@@ -, +, @@ choice
config AP6210
bool "AP6210"
depends on RKWIFI
+
+ config AP6212
+ bool "AP6212"
+ depends on RKWIFI config AP6234
bool "AP6234"
3、在配置文件 rockchip_defconfig 中屏蔽旧 wifi 芯片，增加新的 wifi 芯片
kernel/arch/arm/configs/rockchip_defconfig
diff --git a/kernel/arch/arm/configs/rockchip_defconfig b/kernel/arch/arm/configs/rockchip_defconfig
index e7c697a..5199ec0
--- a/kernel/arch/arm/configs/rockchip_defconfig
+++ b/kernel/arch/arm/configs/rockchip_defconfig
@@ -, +, @@ CONFIG_USB_SIERRA_NET=y
CONFIG_RTL8188EU=y
CONFIG_ESP8089=y
CONFIG_RKWIFI=y
-CONFIG_AP6335=y
+# CONFIG_AP6335 is not set
+CONFIG_AP6212=y
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_KEYRESET=y
4、此时串口打印中会出现打开文件 fw_bcm43438a1.bin 失败，需要更新 wifi 模块固件。
[ 18.686420] dhdsdio_download_code_file: Open firmware file failed /system/etc/firmware/fw_bcm43438a1.bin
[ 18.686430] _dhdsdio_download_firmware: dongle image file download failed
WiFI 固件路径：/external/wlan_loader/firmware
将模块供应商提供的固件文件拷贝到此目录下，然后编译烧录。
external/wlan_loader/firmware/fw_bcm43438a1.bin
external/wlan_loader/firmware/fw_bcm43438a1_apsta.bin
external/wlan_loader/firmware/fw_bcm43438a1_p2p.bin
external/wlan_loader/firmware/nvram_ap6212.txt
编译后，系统会将模块固件拷贝到 out/target/product/rk3288/system/etc//firmware/ 目录下
如果只是调试，可以通过 adb 将固件 push 到 /system/etc//firmware/ 目录下，然后重启。
kernel/drivers/net/wireless/rockchip_wlan/rkwifi/rk_wifi_config.c
wifi 驱动路径：kernel/net/rfkill/rfkill-wlan.c
如果器件升级，比如器件为AP6212A，供应商给的文件问 nvram_ap6212a.txt，则需要修改下面文件。（直接用以前的 nvram_ap6212.txt 也可以用，但文件不一样，不清楚）
路径：\kernel\drivers\net\wireless\rockchip_wlan\rkwifi\bcmdhd\dhd_config.c
diff --git a/kernel/drivers/net/wireless/rockchip_wlan/rkwifi/bcmdhd/dhd_config.c b/kernel/drivers/net/wireless/rockchip_wlan/rkwifi/bcmdhd/dhd_config.c
index 39641e1..91d7925
--- a/kernel/drivers/net/wireless/rockchip_wlan/rkwifi/bcmdhd/dhd_config.c
+++ b/kernel/drivers/net/wireless/rockchip_wlan/rkwifi/bcmdhd/dhd_config.c
@@ -, +, @@ dhd_conf_set_fw_name_by_chip(dhd_pub_t *dhd, char *fw_path, char *nv_path)
strcpy(&fw_path[i+], bcm43438a0_fw_name[fw_type]);
else if (chiprev == BCM43430A1_CHIP_REV)
strcpy(&fw_path[i+], bcm43438a1_fw_name[fw_type]);
- strcpy(&nv_path[j+], "nvram_ap6212.txt");
+ strcpy(&nv_path[j+], "nvram_ap6212a.txt");break;
case BCM43340_CHIP_ID:
if (chiprev == BCM43340B0_CHIP_REV)
5、BT 驱动中增添代码，支持 AP6212
BT 驱动路径：kernel/net/rfkill/rfkill-bt.c
diff --git a/kernel/net/rfkill/rfkill-bt.c b/kernel/net/rfkill/rfkill-bt.c
index a1a156c..
--- a/kernel/net/rfkill/rfkill-bt.c
+++ b/kernel/net/rfkill/rfkill-bt.c
@@ -, +, @@ static const char bt_name[] =
#else
"ap6210_24M"
#endif
+#elif defined(CONFIG_AP6212)
+ "ap6212"
#elif defined(CONFIG_AP6330)
"ap6330"
#elif defined(CONFIG_AP6476)
@@ -, +, @@ static int rfkill_rk_set_power(void *data, bool blocked)
struct rfkill_rk_data *rfkill = data;
struct rfkill_rk_gpio *poweron = &rfkill->pdata->poweron_gpio;
struct rfkill_rk_gpio *reset = &rfkill->pdata->reset_gpio;
-#if defined(CONFIG_AP6210) || defined(CONFIG_AP6335)
+#if defined(CONFIG_AP6210) || defined(CONFIG_AP6212) || defined(CONFIG_AP6335)
struct rfkill_rk_gpio* rts = &rfkill->pdata->rts_gpio;
struct pinctrl *pinctrl = rfkill->pdata->pinctrl;
#endif
@@ -, +, @@ static int rfkill_rk_set_power(void *data, bool blocked)
msleep();
gpio_direction_output(reset->io, reset->enable);
}
-#if defined(CONFIG_AP6210) || defined(CONFIG_AP6335)
+#if defined(CONFIG_AP6210) || defined(CONFIG_AP6212) || defined(CONFIG_AP6335)
if (pinctrl != NULL && gpio_is_valid(rts->io))
{
pinctrl_select_state(pinctrl, rts->gpio_state);
到此 AP6212 就可以正常使用了，但是不知道供应商提供的 BT 固件应该拷贝到哪里。
BT 固件路径：vendor/rockchip/common/bluetooth/lib/firmware
device/common/bluetooth/libbt/src/hardware.c