iOS scrollView中嵌套多个tabeleView处理方案

时间:2022-11-13 06:39:29

iOS  scrollView中嵌套多个tabeleView处理方案iOS  scrollView中嵌套多个tabeleView处理方案iOS  scrollView中嵌套多个tabeleView处理方案

项目中经常会有这样的需求,scrollView有个头部,当scrollView滚动的时候头部也跟着滚动,同时头部还有一个tab会锁定在某个位置,scrollView中可以放很多不同的view,这些view可以在scrollView中横向滚动,要实现这样的需求,按理说如果头部是固定不动的,那么在scrollView嵌套多层view,同时控制这些view的在scrollView中的位置,是很好实现的,这里的难点在scrollView的头部也是可以滚动的。

解决以上问题有2中方法可以考虑

方法1:

不用scrollView,直接用一个tableView,头部作为tableView的tableHeaderView。当头部的tab被点击了,切换tableView的数据源,通过一个index来标识当前选中了那个tab,然后让tableView去刷新指定的数据源。如果你用这种方法好处是很快就可以实现功能,我想遇到这样的需求,大部分人都是采用的这种方案吧。缺点了也是很明显,所有tab公用一个tableView,就会导致tableView中的业务相当复杂,tableView中的代码会非常多,并且可拓展性也不强。

方法2:

用scrollView,让scrollView覆盖其父视图的整个界面,然后创建多个view作为scrollView的子视图,这里的view不限定是tableView,collectionView也是可以的,把创建的n个View依次添加到scrollView中,注意这些view的x轴,同时设置scrollview的contentsize,我们再创建一个headerView,作为scrollView的头部。同时通过addSubview的方式把headerView添加到scrollView中,注意要保证headerView要在最上层,防止其被遮住。每个tableView在被创建的时候提供一个setHeader的方法,并且传入这个创建headerView,在setheader方法中,我们拿到headerView的真实宽高,并为该tableView添加一个相同高度的tableHeaderView,其实大概意思就是为所有tableView都添加一个和scrollView的headview大小相同的tableViewHeaderView,由于我们的scrollView的header浮在最上层,刚好完美的遮住这些tableView的tableHeaderView,当我们tableView上下滑动的时候控制headerView和tableView的tableHeaderView同步滑动就可以了,当我们需要横向滑动的时候,监听scrollView的contentoffset,让headrView的x轴跟随scrollView滑动,这样联动就算完成了。剩下的就是处理点击事件,处理滑动事件的问题了。说了这么多,估计都有点糊涂了把,还是直接上代码把,这里把部分核心代码帖处理,并且在文章结束的时候送上测试demo

#import "ViewController.h"
#import "UIView+XYView.h"
#import "TYTableView1.h"
#import "TableView2.h"
#import "TYHeaderView.h" #define kHeadHeight 300 @interface ViewController ()<UIScrollViewDelegate,headerViewDelegate> @property (nonatomic, strong) UIScrollView *scrollView; @property (nonatomic, strong) TYHeaderView *headerView; @property (nonatomic, strong) TYTableView1 *tableView1; @property (nonatomic, strong) TableView2 *tableView2; @property (nonatomic, assign) CGPoint lastContentOffset; @end @implementation ViewController - (void)viewDidLoad {
[super viewDidLoad];
// Do any additional setup after loading the view, typically from a nib. [self setupUI]; } -(TYHeaderView *)headerView{
if (!_headerView) {
_headerView = [[TYHeaderView alloc] initWithFrame:CGRectMake(0, 0, SCREEN_WIDTH, kHeadHeight)];
_headerView.backgroundColor = [UIColor redColor];
_headerView.delegate = self;
}
return _headerView;
} -(UIScrollView *)scrollView{
if (!_scrollView) {
_scrollView = [[UIScrollView alloc] initWithFrame:CGRectMake(0, 0, SCREEN_WIDTH, SCREEN_HEIGHT)];
_scrollView.delegate = self;
_scrollView.pagingEnabled = YES;
_scrollView.showsVerticalScrollIndicator = NO;
_scrollView.showsHorizontalScrollIndicator = NO;
_scrollView.contentSize = CGSizeMake(SCREEN_WIDTH *2, 0);
}
return _scrollView;
} -(UITableView *)tableView1{
if (!_tableView1) {
_tableView1 = [[TYTableView1 alloc] initWithFrame:CGRectMake(0, 0,SCREEN_WIDTH, self.scrollView.height)];
_tableView1.showsHorizontalScrollIndicator = NO;
_tableView1.showsVerticalScrollIndicator = NO;
_tableView1.headerView = self.headerView;
}
return _tableView1;
} -(UITableView *)tableView2{
if (!_tableView2) {
_tableView2 = [[TableView2 alloc] initWithFrame:CGRectMake(SCREEN_WIDTH, 0,SCREEN_WIDTH, self.scrollView.height)];
_tableView2.showsHorizontalScrollIndicator = NO;
_tableView2.showsVerticalScrollIndicator = NO;
_tableView2.headerView = self.headerView;
}
return _tableView2;
} -(void)setupUI{
[self.view addSubview:self.scrollView];
[self.scrollView addSubview:self.tableView1];
[self.scrollView addSubview:self.tableView2];
[self.scrollView addSubview:self.headerView]; } #pragma mark - ScrollViewDelegate
-(void)scrollViewDidScroll:(UIScrollView *)scrollView{
if (scrollView == self.scrollView) {
self.headerView.x = scrollView.contentOffset.x;
int index = 0; if (self.lastContentOffset.x < scrollView.contentOffset.x) {
//往右滑动,向上取整
index = ceil((scrollView.contentOffset.x/SCREEN_WIDTH));
}else if (self.lastContentOffset.x > scrollView.contentOffset.x)
{
//往左滑动,向下取整
index = floor((scrollView.contentOffset.x/SCREEN_WIDTH));
}else
{
//没动
index = (scrollView.contentOffset.x/SCREEN_WIDTH);
} CGFloat mobileDistance = (0-self.headerView.y);
switch (index) {
case 0:{
//修改circleTableView
if (self.tableView1.contentOffset.y<mobileDistance) {
[self.tableView1 setContentOffset:CGPointMake(0, mobileDistance) animated:NO];
}
}
break;
case 1:{
//修改photoView
if (self.tableView2.contentOffset.y<mobileDistance) {
[self.tableView2 setContentOffset:CGPointMake(0, mobileDistance) animated:NO];
}
}
break;
default:
break; }
self.lastContentOffset = scrollView.contentOffset;
}
} -(void)scrollViewDidEndDecelerating:(UIScrollView *)scrollView{
static int lastIndex = 0;
int index = 0; if (self.lastContentOffset.x < scrollView.contentOffset.x) {
//往右滑动,向上取整
index = ceil((scrollView.contentOffset.x/SCREEN_WIDTH));
}else if (self.lastContentOffset.x > scrollView.contentOffset.x)
{
//往左滑动,向下取整
index = floor((scrollView.contentOffset.x/SCREEN_WIDTH));
}else
{
//没动
index = (scrollView.contentOffset.x/SCREEN_WIDTH);
}
// if (lastIndex != index) { //让headerView重新设置选中的item
self.headerView.selectIndex = index;
// }
lastIndex = index;
} #pragma mark - headerViewDelegate
-(void)headerView:(TYHeaderView *)headerView SelectionIndex:(NSInteger)index{
//让scrollView滚动到指定位置
[self.scrollView setContentOffset:CGPointMake(self.scrollView.width*index, 0) animated:YES];
}

上面这段代码主要就怎么给scrollView添加子视图 如果设置子视图的位置和headerView的位置

#import "TYTableView1.h"

@interface TYTableView1 ()<UITableViewDelegate,UITableViewDataSource>
@property (nonatomic, assign) CGPoint lastContentOffset; @end @implementation TYTableView1 -(void)setHeaderView:(TYHeaderView *)headerView{
_headerView = headerView;
self.dataSource = self;
self.delegate = self;
self.scrollIndicatorInsets = UIEdgeInsetsMake(headerView.height, 0, 0, 0);
UIView *tableHeaderView = [[UIView alloc] initWithFrame:CGRectMake(0, 0, SCREEN_WIDTH, self.headerView.height)];
self.tableHeaderView = tableHeaderView;
[self reloadData];
} #pragma mark - ScrollViewDelegate
-(void)scrollViewDidScroll:(UIScrollView *)scrollView{
CGFloat placeHolderHeight = self.headerView.height - 44;
CGFloat offsetY = scrollView.contentOffset.y;
if (offsetY >= 0 && offsetY <= placeHolderHeight) {
if (offsetY > self.lastContentOffset.y) {
//往上滑动
if (offsetY>(-self.headerView.y)) {
self.headerView.y = -offsetY;
}
}else
{
//往下滑动
if (offsetY<(-self.headerView.y)) {
self.headerView.y = -offsetY;
}
}
}
else if (offsetY > placeHolderHeight) {
if (self.headerView.y != (-placeHolderHeight)) {
if (offsetY > self.lastContentOffset.y) {
//往上滑动
self.headerView.y = self.headerView.y - (scrollView.contentOffset.y-self.lastContentOffset.y);
}
if (self.headerView.y < (-placeHolderHeight)) {
self.headerView.y = -placeHolderHeight;
}
if (self.headerView.y>=0) {
self.headerView.y = 0;
}
}
}
else if (offsetY <0) {
self.headerView.y = - offsetY;
} // if (offsetY>50) {
// self.headerView.navView.transparency = 1;
// }else
// {
// self.headerView.navView.transparency = 0;
// } self.lastContentOffset = scrollView.contentOffset;
} #pragma mark - UITableViewDelegate && UITableViewDataSource
-(NSInteger)numberOfSectionsInTableView:(UITableView *)tableView{
return 1;
} -(NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section{
return 20;
} -(UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath{
UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:@"cell"];
if (cell == nil) {
cell = [[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:@"cell"];
}
cell.textLabel.text = @"测试数据";
return cell;
}

这一段主要是目的就是如果setHederView,并且设置一个同header同样宽高的tableViewHeaderView,并且监听tableView的滚动,保证headerView的滚动和tableHeaderView同步,第一个tableView的设置是这样的,第二个,第三个tableView的设置也是一样的,这里就不在多说了,这里还有一个注意点,就是当header滚动要一定程度了之后需要控制headerView的最大滚动区域,这样才可以保障tab始终悬浮在tableView的最顶部。

整体的实现思路和相关代码都已经贴出来,多的我也就不废话了,

demo的下载地址 https://github.com/qqcc1388/xmDemo

转载请标注来源 http://www.cnblogs.com/qqcc1388/p/8662375.html