docker安装完毕后,会自动生成一个网卡名为docker0
的网桥,如果其默认分配的网段地址和已有地址段冲突,可按如下步骤修改。
- 查看默认地址段如下
docker0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255
ether 02:42:6e:e3:0a:62 txqueuelen 0 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
- 删除原有配置
yum install bridge-utils
systemctl stop docker.service
ip link set dev docker0 down
brctl delbr docker0
iptables -t nat -F POSTROUTING
- 创建新的网桥
brctl addbr docker0
ip addr add 172.66.1.1/24 dev docker0
ip link set dev docker0 up
- 在docker配置文件中追加参数
# cat /etc/docker/daemon.json
{
"bip": "172.66.1.1/24"
}
- 启动docker
systemctl start docker.service
- 查看是否更改成功
docker0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 172.66.1.1 netmask 255.255.255.0 broadcast 172.66.1.255
ether 8e:08:df:00:c3:dc txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
更改docker-compose网桥地址
使用单机容器编码工具,docker-compose时,容器之间的通信网络会用到br-xxx网桥,该网桥会在宿主机建立,示例如下:
[root@xingyongsheng ~]# ifconfig | head
br-35fc9d6212bd: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 172.16.238.1 netmask 255.255.255.0 broadcast 172.16.238.255
ether 02:42:7a:4f:9a:b9 txqueuelen 0 (Ethernet)
RX packets 6441897 bytes 8754859570 (8.1 GiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 1525889 bytes 953197479 (909.0 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
该网段也有可能与,已有网段重复,若要修改此网段,可按如下步骤进行。安全停掉所有用docker-compose编排的容器,这里建议使用docker-compose down
来彻底停掉容器,并自动帮你移除docker-compose之前创建的网桥。之后修改docker-compose.yml
文件,增加自定义网络段,如下所示。
version: '2.1'
services:
test-service:
image: xxx
container_name: xxxxx
restart: always
networks:
- as4k-test
networks:
as4k-test:
ipam:
config:
- subnet: 172.16.238.0/24
gateway: 172.16.238.1
- 用新的
docker-compose
文件,启动容器。
作者:阿胜4K
出处:https://www.cnblogs.com/asheng2016/p/10532724.html