https://sourceforge.net/projects/sentrytools/
[root@localhost ~]# tar -xzvf portsentry-1.2.tar.gz
[root@localhost ~]# cd portsentry_beta/
[root@localhost portsentry_beta]# ls
CHANGES portsentry.c portsentry_io.c README.COMPAT
CREDITS portsentry.conf portsentry_io.h README.install
ignore.csh portsentry_config.h portsentry_tcpip.h README.methods
LICENSE portsentry.h portsentry_util.c README.stealth
Makefile portsentry.ignore portsentry_util.h
[root@localhost portsentry_beta]# make
Usage: make <systype>
<systype> is one of: linux, debian-linux, bsd, solaris, hpux, hpux-gcc,
freebsd, osx, openbsd, netbsd, bsdi, aix, osf, irix, generic This code requires snprintf()/vsnprintf() system calls
to work. If you run a modern OS it should work on
your system with 'make generic'. If you get it to
work on an unlisted OS please write us with the
changes. Install: make install NOTE: This will install the package in this
directory: /usr/local/psionic Edit the makefile if you wish to change these paths.
Any existing files will be overwritten.
[root@localhost portsentry_beta]# make install
Creating psionic directory /usr/local/psionic
Setting directory permissions
Creating portsentry directory /usr/local/psionic/portsentry
Setting directory permissions
chmod /usr/local/psionic/portsentry
Copying files
cp ./portsentry.conf /usr/local/psionic/portsentry
cp ./portsentry.ignore /usr/local/psionic/portsentry
cp ./portsentry /usr/local/psionic/portsentry
cp: cannot stat `./portsentry': No such file or directory
make: *** [install] Error [root@localhost portsentry_beta]# make linux
SYSTYPE=linux
Making
cc -O -Wall -DLINUX -DSUPPORT_STEALTH -o ./portsentry ./portsentry.c \
./portsentry_io.c ./portsentry_util.c
./portsentry.c: In function ‘PortSentryModeTCP’:
./portsentry.c:: warning: pointer targets in passing argument of ‘accept’ differ in signedness
/usr/include/sys/socket.h:: note: expected ‘socklen_t * __restrict__’ but argument is of type ‘int *’
./portsentry.c: In function ‘PortSentryModeUDP’:
./portsentry.c:: warning: pointer targets in passing argument of ‘recvfrom’ differ in signedness
/usr/include/sys/socket.h:: note: expected ‘socklen_t * __restrict__’ but argument is of type ‘int *’
./portsentry.c::: warning: missing terminating " character
./portsentry.c: In function ‘Usage’:
./portsentry.c:: error: missing terminating " character
./portsentry.c:: error: ‘sourceforget’ undeclared (first use in this function)
./portsentry.c:: error: (Each undeclared identifier is reported only once
./portsentry.c:: error: for each function it appears in.)
./portsentry.c:: error: expected ‘)’ before ‘dot’
./portsentry.c:: error: stray ‘\’ in program
./portsentry.c::: warning: missing terminating " character
./portsentry.c:: error: missing terminating " character
./portsentry.c:: error: expected ‘;’ before ‘}’ token
./portsentry_io.c: In function ‘ConfigTokenRetrieve’:
./portsentry_io.c:: warning: cast from pointer to integer of different size
./portsentry_io.c:: warning: cast from pointer to integer of different size
./portsentry_io.c: In function ‘IsBlocked’:
./portsentry_io.c:: warning: cast from pointer to integer of different size
./portsentry_io.c: In function ‘SubstString’:
./portsentry_io.c:: warning: cast from pointer to integer of different size
make: *** [linux] Error
解决方法 把portsentry.c中代“将带有Copyright 1997-2003字样的那行调整为一行即可”：
调整后如下：
[root@localhost portsentry_beta]# make linux
SYSTYPE=linux
Making
cc -O -Wall -DLINUX -DSUPPORT_STEALTH -o ./portsentry ./portsentry.c \
./portsentry_io.c ./portsentry_util.c
./portsentry.c: In function ‘PortSentryModeTCP’:
./portsentry.c:: warning: pointer targets in passing argument of ‘accept’ differ in signedness
/usr/include/sys/socket.h:: note: expected ‘socklen_t * __restrict__’ but argument is of type ‘int *’
./portsentry.c: In function ‘PortSentryModeUDP’:
./portsentry.c:: warning: pointer targets in passing argument of ‘recvfrom’ differ in signedness
/usr/include/sys/socket.h:: note: expected ‘socklen_t * __restrict__’ but argument is of type ‘int *’
./portsentry_io.c: In function ‘ConfigTokenRetrieve’:
./portsentry_io.c:: warning: cast from pointer to integer of different size
./portsentry_io.c:: warning: cast from pointer to integer of different size
./portsentry_io.c: In function ‘IsBlocked’:
./portsentry_io.c:: warning: cast from pointer to integer of different size
./portsentry_io.c: In function ‘SubstString’:
./portsentry_io.c:: warning: cast from pointer to integer of different size
[root@localhost portsentry_beta]# make install
Creating psionic directory /usr/local/psionic
Setting directory permissions
Creating portsentry directory /usr/local/psionic/portsentry
Setting directory permissions
chmod 700 /usr/local/psionic/portsentry
Copying files
cp ./portsentry.conf /usr/local/psionic/portsentry
cp ./portsentry.ignore /usr/local/psionic/portsentry
cp ./portsentry /usr/local/psionic/portsentry
Setting permissions
chmod 600 /usr/local/psionic/portsentry/portsentry.ignore
chmod 600 /usr/local/psionic/portsentry/portsentry.conf
chmod 700 /usr/local/psionic/portsentry/portsentry Edit /usr/local/psionic/portsentry/portsentry.conf and change
your settings if you haven't already. (route, etc) WARNING: This version and above now use a new
directory structure for storing the program
and config files (/usr/local/psionic/portsentry).
Please make sure you delete the old files when
the testing of this install is complete.
安装路径为：
[root@localhost portsentry_beta]# tree /usr/local/psionic/
/usr/local/psionic/
└── portsentry
├── portsentry
├── portsentry.conf
└── portsentry.ignore 1 directory, 3 files
PortSentry的配置：
1:通过PortSentry.conf
# Un-comment these if you are really anal:
#TCP_PORTS="1,7,9,11,15,70,79,80,109,110,111,119,138,139,143,512,513,514,515,540,635,1080,1524,2000,2001,4000,4001,5742,6000,6001,6667,12345,12346,20034,27665,30303,32771,32772,32773,32774,31337,40421,40425,49724,54320"
#UDP_PORTS="1,7,9,66,67,68,69,111,137,138,161,162,474,513,517,518,635,640,641,666,700,2049,31335,27444,34555,32770,32771,32772,32773,32774,31337,54321"
#
# Use these if you just want to be aware:
TCP_PORTS="1,11,15,79,111,119,143,540,635,1080,1524,2000,5742,6667,12345,12346,20034,27665,31337,32771,32772,32773,32774,40421,49724,54320"
UDP_PORTS="1,7,9,69,161,162,513,635,640,641,700,37444,34555,31335,32770,32771,32772,32773,32774,31337,54321"
#
# Use these for just bare-bones
#TCP_PORTS="1,11,15,110,111,143,540,635,1080,1524,2000,12345,12346,20034,32771,32772,32773,32774,49724,54320"
#UDP_PORTS="1,7,9,69,161,162,513,640,700,32770,32771,32772,32773,32774,31337,54321"
通过portSentry进行入侵检，首先制定要监视的端口清单和相应的阻止对策。然后启动后台进程对这些端口进行检测，一旦发现有人扫描这些端口，以及相应的对策进行阻拦。
通过portentry.conf中关于端口默认配置情况：
一般有意开放的端口是不需要监控的，如果web服务器的80端口！！！！！
在portsentry.conf中自动配置了许多文件如下：
###########################################
# Advanced Stealth Scan Detection Options #
###########################################
#
# This is the number of ports you want PortSentry to monitor in Advanced mode.
# Any port *below* this number will be monitored. Right now it watches
# everything below .
#
# On many Linux systems you cannot bind above port . This is because
# these ports are used as part of IP masquerading. I don't recommend you
# bind over this number of ports. Realistically: I DON'T RECOMMEND YOU MONITOR
# OVER PORTS AS YOUR FALSE ALARM RATE WILL ALMOST CERTAINLY RISE. You've been
# warned! Don't write me if you have have a problem because I'll only tell
# you to RTFM and don't run above the first 1024 ports.
#
#
ADVANCED_PORTS_TCP=""
ADVANCED_PORTS_UDP=""
#这表明,1~1024的所有端口将被监视
# This field tells PortSentry what ports (besides listening daemons) to
# ignore. This is helpful for services like ident that services such
# as FTP, SMTP, and wrappers look for but you may not run (and probably
# *shouldn't* IMHO).
#
# By specifying ports here PortSentry will simply not respond to
# incoming requests, in effect PortSentry treats them as if they are
# actual bound daemons. The default ports are ones reported as
# problematic false alarms and should probably be left alone for
# all but the most isolated systems/networks.
#但监视高端口号会引起更多的误报，可以通下面参数排除出错的端口
# Default TCP ident and NetBIOS service
ADVANCED_EXCLUDE_TCP="111,113,139" #默认请况,使用tcp(111,113,139)的ident和NetBIOS服务以及UDP(520,138,137,67)route,NetBIOS和Bootp服务将被排除在高级扫描之外。
# Default UDP route (RIP), NetBIOS, bootp broadcasts.
ADVANCED_EXCLUDE_UDP="520,138,137,67" ######################
######################
# Configuration Files#
######################
#
# Hosts to ignore＃记录允许合法扫描服务器的主机地址
IGNORE_FILE="/usr/local/psionic/portsentry/portsentry.ignore"
# Hosts that have been denied (running history)＃入侵主机的IP历史记录
HISTORY_FILE="/usr/local/psionic/portsentry/portsentry.history"
# Hosts that have been denied this session only (temporary until next restart)＃被阻止连接主机的ip记录
BLOCKED_FILE="/usr/local/psionic/portsentry/portsentry.blocked"
设置路由重定向:
# Generic
#KILL_ROUTE="/sbin/route add $TARGET$ 333.444.555.666" # Generic Linux
KILL_ROUTE="/sbin/route add -host $TARGET$ gw 333.444.555.666" # Newer versions of Linux support the reject flag now. This
# is cleaner than the above option.
#KILL_ROUTE="/sbin/route add -host $TARGET$ reject" # Generic BSD (BSDI, OpenBSD, NetBSD, FreeBSD)
#KILL_ROUTE="/sbin/route add $TARGET$ 333.444.555.666"
#把数据包重定向到一个未知的主机，使这无法获取信息
我们还可以利用linux中的iptables命令，可以切断攻主机的连接:
# iptables support for Linux
KILL_ROUTE="/usr/local/bin/iptables -I INPUT -s $TARGET$ -j DROP"
#
# For those of you running FreeBSD (and compatible) you can
可以直热门把攻击者的ip记录到/etc/hosts.deny文件中，利用TCP_Wrappers保护机制来防止攻击
###############
# TCP Wrappers#
###############
# This text will be dropped into the hosts.deny file for wrappers
# to use. There are two formats for TCP wrappers:
#
# Format One: Old Style - The default when extended host processing
# options are not enabled.
#
KILL_HOSTS_DENY="ALL: $TARGET$" # Format Two: New Style - The format used when extended option
# processing is enabled. You can drop in extended processing
# options, but be sure you escape all '%' symbols with a backslash
# to prevent problems writing out (i.e. \%c \%h )
#
#KILL_HOSTS_DENY="ALL: $TARGET$ : DENY"
系统默认是利用TCP_Wrappers来切断与主机之间的连接
改变完毕后，改变文件的权限，以保证其安全。
/usr/psionic/portentry/portsentry.ignore文件中设置portsentry忽略主机ip,限允许合法扫描的主机地址一面是配置情况:
[root@localhost portsentry]# cat portsentry.ignore
# Put hosts in here you never want blocked. This includes the IP addresses
# of all local interfaces on the protected host (i.e virtual host, mult-home)
# Keep 127.0.0.1 and 0.0.0.0 to keep people from playing games.
#
# PortSentry can support full netmasks for networks as well. Format is:
#
# <IP Address>/<Netmask>
#
# Example:
#
# 192.168.2.0/
# 192.168.0.0/
# 192.168.2.1/
# Etc.
#
# If you don't supply a netmask it is assumed to be 32 bits.
#
# 127.0.0.1/
0.0.0.0
#Exclude all local interfaces
127.0.0.1
记得带上本机地址
portsentry启动检测模试。对应tcp和udp两种协议方式，portsentry分别有三种启动模式，即基本 秘密和高级秘密扫描检测模式，合计６种模式。
[root@localhost portsentry]# ls
portsentry portsentry.conf portsentry.ignore
[root@localhost portsentry]# pwd
/usr/local/psionic/portsentry
[root@localhost portsentry]# ./portsentry -h
PortSentry - Port Scan Detector.
Copyright - Craig H. Rowland <craigrowland at users dot sourceforget dot net>
Licensing restrictions apply. Please see documentation
Version: 1.2 usage: portsentry [-tcp -udp -stcp -atcp -sudp -audp] *** PLEASE READ THE DOCS BEFORE USING *** [root@localhost portsentry]# ./portsentry -stcp
portsentry -tcp ---->TCP的基本端口绑定模式
portsentry -udp --->UDP的基本端口绑定模式
portsentry -stcp --->TCP的秘密扫描模式
portsentry -sudp --->UDP的秘密扫描检测模式
portsentry -atcp ---->TCP的高级秘密扫描检测模式
portsentry audp ----->UDP的高级秘密扫描检测
使用高级秘密扫描检测模式(Advanced Stealth Scan Detection Mode),PortSentry会自动检查服务器上正在运行的端口，然后把这些端口，从配置文件中移去，只监控其它的端口。
启动portSentry的命令:
[root@localhost portsentry]# /usr/local/psionic/portsentry/portsentry -atcp
[root@localhost portsentry]# cat /etc/rc.d/rc.local
#!/bin/sh
#
# This script will be executed *after* all the other init scripts.
# You can put your own initialization stuff in here if you don't
# want to do the full Sys V style init stuff.
#
touch /var/lock/subsys/local
/usr/local/psionic/portsentry/portsentry -atcp
[root@localhost portsentry]# ip a
: lo: <LOOPBACK,UP,LOWER_UP> mtu qdisc noqueue state UNKNOWN
link/loopback ::::: brd :::::
inet 127.0.0.1/ scope host lo
inet6 ::/ scope host
valid_lft forever preferred_lft forever
: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu qdisc pfifo_fast state UP qlen
link/ether :::b3:: brd ff:ff:ff:ff:ff:ff
inet 10.100.2.119/ brd 10.100.2.255 scope global eth0
inet6 fe80:::ff:feb3:/ scope link
valid_lft forever preferred_lft forever
[root@localhost portsentry]# netstat -lnutp
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 0.0.0.0: 0.0.0.0:* LISTEN /sshd
tcp 127.0.0.1: 0.0.0.0:* LISTEN /master
tcp ::: :::* LISTEN /sshd
tcp ::: :::* LISTEN /master
udp 0.0.0.0: 0.0.0.0:* /dhclient
进行扫描:
[root@ok Safety]# nmap -sS 10.100.2.119 Starting Nmap 5.51 ( http://nmap.org ) at 2016-10-21 21:35 CST
Nmap scan report for 10.100.2.119
Host is up (.00060s latency).
Not shown: filtered ports
PORT STATE SERVICE
/tcp open ssh
/tcp closed http
/tcp closed http-proxy
MAC Address: :::B3:: (QEMU Virtual NIC) Nmap done: IP address ( host up) scanned in 5.19 seconds
查看系统日志:
[root@localhost portsentry]# tail -f /var/log/messages
Oct :: localhost portsentry[]: adminalert: Advanced mode will manually exclude port:
Oct :: localhost portsentry[]: adminalert: Advanced mode will manually exclude port:
Oct :: localhost portsentry[]: adminalert: Advanced Stealth scan detection mode activated. Ignored TCP port:
Oct :: localhost portsentry[]: adminalert: Advanced Stealth scan detection mode activated. Ignored TCP port:
Oct :: localhost portsentry[]: adminalert: Advanced Stealth scan detection mode activated. Ignored TCP port:
Oct :: localhost portsentry[]: adminalert: Advanced Stealth scan detection mode activated. Ignored TCP port:
Oct :: localhost portsentry[]: adminalert: PortSentry is now active and listening.
Oct :: localhost portsentry[]: attackalert: TCP SYN/Normal scan from host: 10.100.2.14/10.100.2.14 to TCP port:
Oct :: localhost portsentry[]: attackalert: Host 10.100.2.14 has been blocked via wrappers with string: "ALL: 10.100.2.14"
Oct :: localhost portsentry[]: attackalert: Host 10.100.2.14 has been blocked via dropped route using command: "/sbin/route add -host 10.100.2.14 gw 333.444.555.666"
看到ip记录在文件中了
[root@localhost portsentry]# cat portsentry.blocked.atcp
- // :: Host: 10.100.2.14/10.100.2.14 Port: TCP Blocked
[root@localhost portsentry]# cat portsentry.blocked.stcp
[root@localhost portsentry]# cat portsentry.history
- // :: Host: 10.100.2.14/10.100.2.14 Port: TCP Blocked
[root@localhost portsentry]# pwd
/usr/local/psionic/portsentry
[root@localhost portsentry]# ls
portsentry portsentry.blocked.atcp portsentry.blocked.stcp portsentry.conf portsentry.history portsentry.ignore
查看一下/etc/hoosts.deny,发现如下恶意ip:
[root@localhost portsentry]# cat /etc/hosts.deny
#
# hosts.deny This file contains access rules which are used to
# deny connections to network services that either use
# the tcp_wrappers library or that have been
# started through a tcp_wrappers-enabled xinetd.
#
# The rules in this file can also be set up in
# /etc/hosts.allow with a 'deny' option instead.
#
# See 'man 5 hosts_options' and 'man 5 hosts_access'
# for information on rule syntax.
# See 'man tcpd' for information on tcp_wrappers
#
ALL: 10.100.2.14
[root@localhost portsentry]#
再次ssh 不能连接成功！！！！
[root@ok ok]# ssh 10.100.2.119 -v
OpenSSH_5.3p1, OpenSSL 1.0.1e-fips Feb
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
debug1: Connecting to 10.100.2.119 [10.100.2.119] port .
debug1: Connection established.
debug1: permanently_set_uid: /
debug1: identity file /root/.ssh/identity type -
debug1: identity file /root/.ssh/identity-cert type -
debug1: identity file /root/.ssh/id_rsa type -
debug1: identity file /root/.ssh/id_rsa-cert type -
debug1: identity file /root/.ssh/id_dsa type -
debug1: identity file /root/.ssh/id_dsa-cert type -
debug1: identity file /root/.ssh/id_ecdsa type -
debug1: identity file /root/.ssh/id_ecdsa-cert type -
ssh_exchange_identification: Connection closed by remote host
删除/etc/hosts.deny中的ip
[root@ok ok]# ssh 10.100.2.119 -v
OpenSSH_5.3p1, OpenSSL 1.0.1e-fips Feb
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
debug1: Connecting to 10.100.2.119 [10.100.2.119] port .
debug1: Connection established.
debug1: permanently_set_uid: /
debug1: identity file /root/.ssh/identity type -
debug1: identity file /root/.ssh/identity-cert type -
debug1: identity file /root/.ssh/id_rsa type -
debug1: identity file /root/.ssh/id_rsa-cert type -
debug1: identity file /root/.ssh/id_dsa type -
debug1: identity file /root/.ssh/id_dsa-cert type -
debug1: identity file /root/.ssh/id_ecdsa type -
debug1: identity file /root/.ssh/id_ecdsa-cert type -
ssh_exchange_identification: Connection closed by remote host
[root@ok ok]# ssh 10.100.2.119 -v
OpenSSH_5.3p1, OpenSSL 1.0.1e-fips Feb
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
debug1: Connecting to 10.100.2.119 [10.100.2.119] port .
debug1: Connection established.
debug1: permanently_set_uid: /
debug1: identity file /root/.ssh/identity type -
debug1: identity file /root/.ssh/identity-cert type -
debug1: identity file /root/.ssh/id_rsa type -
debug1: identity file /root/.ssh/id_rsa-cert type -
debug1: identity file /root/.ssh/id_dsa type -
debug1: identity file /root/.ssh/id_dsa-cert type -
debug1: identity file /root/.ssh/id_ecdsa type -
debug1: identity file /root/.ssh/id_ecdsa-cert type -
ssh_exchange_identification: Connection closed by remote host
[root@ok ok]# ssh 10.100.2.119 -v
OpenSSH_5.3p1, OpenSSL 1.0.1e-fips Feb
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
debug1: Connecting to 10.100.2.119 [10.100.2.119] port .
debug1: Connection established.
debug1: permanently_set_uid: /
debug1: identity file /root/.ssh/identity type -
debug1: identity file /root/.ssh/identity-cert type -
debug1: identity file /root/.ssh/id_rsa type -
debug1: identity file /root/.ssh/id_rsa-cert type -
debug1: identity file /root/.ssh/id_dsa type -
debug1: identity file /root/.ssh/id_dsa-cert type -
debug1: identity file /root/.ssh/id_ecdsa type -
debug1: identity file /root/.ssh/id_ecdsa-cert type -
debug1: Remote protocol version 2.0, remote software version OpenSSH_5.
debug1: match: OpenSSH_5. pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_5.
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug1: kex: server->client aes128-ctr hmac-md5 none
debug1: kex: client->server aes128-ctr hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(<<) sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug1: Host '10.100.2.119' is known and matches the RSA host key.
debug1: Found key in /root/.ssh/known_hosts:
debug1: ssh_rsa_verify: signature correct
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug1: SSH2_MSG_NEWKEYS received
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password
debug1: Next authentication method: publickey
debug1: Trying private key: /root/.ssh/identity
debug1: Trying private key: /root/.ssh/id_rsa
debug1: read PEM private key done: type RSA
debug1: Authentication succeeded (publickey).
debug1: channel : new [client-session]
debug1: Requesting no-more-sessions@openssh.com
debug1: Entering interactive session.
debug1: Sending environment.
debug1: Sending env XMODIFIERS = @im=ibus
debug1: Sending env LANG = en_US.UTF-
Last login: Thu Oct :: from 10.100.2.14